“Comment” on the Reply to the Paper “On the Elber–Karplus Reaction Path-Following Method and Related Procedures”

The flaws in the Reply [1] to our paper [2] have been pointed out. Elber and Karplus (EK) have not disproved our irrefutable global statement that the energy average cannot be minimized which rebuts the theoretical background of EK-type calculations. Another statement of ours has shown that even a curve for which the average energy is locally minimal for all directional perturbations in the sense of classical variational calculus cannot be identical with the reaction path (RP) defined as a steepest descent path (SDP). EK found an error in the early preprint of our theoretical paper [3] and because of this error they qualified our correct variational statement as false for all the SDPs consisting of a straight line each. Mixing global and variational arguments, EK refuted our criticism in a logically incorrect manner. In this Comment we prove that both of our earlier statements invariably remain in force and the criticism included in those has been as well-established and solid as was before.     

离子色谱法测定皂粒中葡萄糖酸钠含量

建立了离子色谱检测皂粒中葡萄糖酸钠含量的分析方法。样品经METROSEP CARB 1糖分析色谱柱(150 mm×4.0 mm,5μm)分离,以150 mmol·L~(-1) NaOH+20 mmol·L~(-1)NaAc水溶液为流动相进行等度洗脱,流速1.0 mL·min~(-1),采用瑞士万通850型离子色谱仪,选择脉冲安培检测器进行测定,外标法定量。结果显示:葡萄糖酸钠在0.5～200 mg·L~(-1)质量浓度范围内呈良好的线性,相关系数(r~2)为0.999 6,检出限为0.25 mg·L~(-1),定量下限为0.63 mg·L~(-1)。葡萄糖酸钠在1～20 mg/g加标范围内的回收率为80.7%～104%。该方法无需衍生化处理,操作简单方便,灵敏度高,可用于皂粒产线葡萄糖酸钠含量的监控与测定。     

Pure and doped lanthanum cobaltites obtained by combustion method

We report the synthesis of La_1−xSr_xCoO₃ nanopowders by solution combustion method using metal nitrates and -alanine (alanine method) or urea (urea method) as fuel. The influence of metal nitrates/organic substance molar ratio and the type of fuel was investigated. The isolated complex precursors were characterized by atomic absorption spectroscopy (AAS), FT-IR spectra and DTA–TG analysis. The La_1−xSr_xCoO₃ (x = 0–0.3) powders were characterized by X-ray diffraction (XRD), scanning electron microscopy–energy-dispersive X-ray analysis (SEM–EDX), as well as by specific surface area measurements. XRD patterns indicate the formation of single-phase LaCoO₃ (rhombohedral) when as-synthesized powders were calcined at 873 K, 3 h in the case of the alanine method and at 1073 K, 3 h for urea-based system. Also, strontium doped lanthanum cobaltites obtained by both methods at 1273 K are single phase with rhombohedral perovskite-like structure as XRD data have proved. SEM investigation of pure and doped lanthanum cobaltites reveal that the samples prepared by both methods have fine particles with tendency of agglomerates formation with different shapes, spongy aspect and high porosity. La_1−xSr_xCoO₃ nanopowders obtained by alanine method have larger specific surface area values than those prepared by urea method.     

氯化聚乙烯弹性体的固相法合成

讨论了以固相法合成氯化聚乙烯（ＣＰＥ）弹性体的过程．实验结果表明，以固相氯化反应所得的ＣＰＥ，其大分子链上Ｃｌ取代基的分布比水相悬浮法更均匀．氯化过程的温度直接影响氯化速度及分子结构，如残留结晶、氯分布等．而聚乙烯颗粒表面与内部的氯化程度取决于氯化速度．大分子链上Ｃｌ取代基对邻近基团的氯化起阻碍作用     

Novel evaluation method of biodegradabilities for oil-based polycaprolactone by naturally occurring radiocarbon-14 concentration using accelerator mass spectrometry based on ISO 14855-2 in controlled compost

The biodegradabilities of poly(?-caprolactone) (PCL) powders (av. size = 180.7 μm) in controlled compost at 58 °C have been studied using the microbial oxidative degradation analyzer (MODA) based on ISO 14855-2 entitled “Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test”. The biodegradability of the PCL powders was 101.4% in a 56-day test period by the ISO method. The biodegradabilities of PCL powders have been studied using percent modern carbon (pMC) measured by accelerated mass spectrometry (AMS). Trapped CO₂ was analyzed by AMS to determine the pMC (sample) using ¹⁴C radiocarbon concentration. By using the theory that the pMC (sample) was the sum of pMC (compost) (104.88%) and pMC (PCL) (0%) as the respective ratios in the determined period, CO₂ (respiration) was calculated only from one reaction vessel. The biodegradability of PCL powders was 79.9% in a 56-day test period by the AMS method. It was found that respiration activities in the sample vessel including PCL, compost and sea sand were the same as that in the blank vessel including compost and sea sand without PCL during the active biodegradation period (0-33 day) at 58 °C. It was confirmed that respiration activities in the sample vessel were slightly higher than that in the blank vessel after active biodegradation due to the propagation of microorganisms using energy and metabolites by PCL biodegradation during those periods.     

Structures and stability of N7+ and N7− clusters

Ab initio molecular orbital theory and density functional theory have been used to study nine isomers of N₇ ionic clusters with low spin at the HF/6-31G*, MP2/6-31G*, B3LYP/6-31G*, and B3LYP/6-311(+)G* levels of theory. All stationary points are examined with harmonic vibrational frequency analyses. Four N₇ ⁺ isomers and five N₇ ⁻ isomers are determined to be local minima or very close to the minima on their potential-energy hypersurfaces, respectively. For N₇ ⁺ and N₇ ⁻, the energetically low lying isomers are open-chain structures (C _{2 v} and C _{2 v} or C₂). The results are very similar to those of other known odd-number nitrogen ions, such as N₅ ⁺, N₉ ⁺, and N₉ ⁻, for which the open-chain structures are also the global minima. This research suggests that the N₇ ionic clusters are likely to be stable and to be potential high-energy-density materials if they could be synthesized. Received: 16 July 2001 / Accepted: 8 October 2001 / Published online: 21 January 2002     

From a point-like to an arbitrarily shaped sample: A survey of equations for electron paramagnetic resonance signal intensity calculations

A set of original, analytical equations useful for theoretical calculation of the electron paramagnetic resonance (EPR) signal intensity are presented for the multitude of sample shapes, which range from point-like, line-like, planar, rectangular, cubical, circular, cylindrical, spherical to an irregularly shaped sample. The samples can be situated at any available position within the prescribed part of the microwave cavity (a central cylinder of diameter 11 mm and length 23.5 mm, in either a Bruker single TE₁₀₂ or double TE₁₀₄ rectangular cavity, with the modulation coils situated in the left and right side cavity walls, which is connected to a X-band, field-modulated CW Bruker EPR spectrometer). The theoretical computations of EPR signal intensity can be used in the computer simulations in which: (i) the EPR signal intensity profiles are constructed; (ii) the optimal sample positions in the cavity to give a maximum value of signal intensity are found; (iii) the errors associated with sample positioning within the cavity when compared to a second sample of a different size, shape or position are studied.     

Kinetic-catalytic determination of traces of iron by the oxidative coupling reaction of 3-methyl-2-benzothiazolinone hydrazone with N,N-dimethylaniline

A new kinetic-catalytic method by the initial rate procedure for the determination of nanogram level of iron(III) is developed, which is based on its catalytic effect on the oxidative coupling of 3-methyl-2-benzothiazolinone hydrazone (MBTH) with N,N-dimethylaniline (DMA) to form an indamine dye (λ_max=590 nm) in the presence of hydrogen peroxide. Iron(II) is also determined, being oxidized to iron(III) by hydrogen peroxide. Calibration graphs obtained by the initial rate method are linear in the range 1–1000 ng ml⁻¹ Fe and as low as 10⁻⁸ M Fe(II, III) can easily be determined. The relative standard deviations are 6.6, 2.5 and 1.5% for ten determinations of 1, 20 and 60 ng ml⁻¹ of Fe(III), respectively. The method is applicable to the determination of iron in natural waters without preconcentration and separation.     

Effect of ionic and non-ionic surfactants on the reduction of water soluble colloidal MnO<Subscript>2</Subscript> by glycolic acid

Kinetics of the redox reaction between colloidal MnO₂ and glycolic acid have been studied spectrophotometrically by monitoring the decay in the absorbance of colloidal MnO₂ in absence and presence of surfactants. Anionic sodium dodecyl sulfate has no effect, non-ionic Triton X-100 catalyzed the reaction and experiments were not possible in presence of cationic cetyltrimethylammonium bromide due to the precipitation of MnO₂.The reaction followed the same type of kinetic behavior, i.e., fractional-, first- and fractional-order dependencies, respectively, in [glycolic acid], [MnO₂] and [H⁺ ] in both the media. Effects of gum arabic and manganese(II) have also been studied and discussed. Mechanisms in accordance with the experimental data are proposed for the reaction.     

纳米硅胶颗粒的制备及其对金属离子的识别

利用sol-gel方法制得了纳米级的硅胶悬浮液.通过表面化学修饰引入了具有发射荧光能力的萘基基团.在稳态荧光研究中清晰地观察到在微小粒子表面上萘基基团会因溶剂不同而发生重新排组,并呈现出激基缔合物发光.研究了不同过渡金属离子对粒子表面荧光的猝灭效应,发现只有Cu2＋对纳米微球荧光有强烈的猝灭特征,这种优良的选择能力使其有望发展成为一种分析检测Cu2＋的荧光化学敏感器.