BiPO4/石墨烯光电极的制备及其光电催化性能（英文）

光电催化(PEC)氧化法是一种使用半导体电极材料在光和电的共同作用下处理水中有机污染的有效方法.在PEC工艺中,施加偏压不仅可以利用电催化对有机污染物进行降解,而且在偏压作用下,光生电子-空穴对能够得到有效的分离和传输,从而大大提高了机物污染物的去除速率.尽管PEC技术已经取得了许多重要的突破,但是能量转换效率仍然无法满足实际应用.因此,开发具有优异性能,良好稳定性和低成本的光电极材料是一项具有挑战性的研究工作.本文采用两步电沉积法制备了BiPO4纳米棒/还原氧化石墨烯/FTO复合光电极(BiPO4/r GO/FTO).电镜结果表明,电沉积制得的纳米棒状磷酸铋均匀负载在石墨烯纳米片层表面.采用甲基橙为模型体系,考察了复合光电极的光电催化活性.BiPO4/r GO/FTO复合电极的光电催化降解速率是BiPO4/FTO光电极的2.8倍,显示出优良的光电催化活性.实验进一步研究了工作电压和BiPO4沉积时间对甲基橙光电降解性能的影响.最佳的BiPO4沉积时间为45 min,最佳工作电压为1.2 V.捕获实验和ESR实验表明羟基自由基(·OH)和超氧化物自由基(·O2-)是该电极的主要活性物种.BiPO4/r GO/FTO复合电极经过四次循环实验后其降解甲基橙效率保持不变,显示出高稳定性,采用光电流,交流阻抗及其荧光测试对其光催化机理进行推测.结果表明该复合光电极具有高PEC活性的主要原因是:石墨烯的引入加快了BiPO4的电子空穴的分离,拓宽了石墨烯的可见光吸收范围;同时,石墨烯诱导产生的BiPO4混合相也进一步促进了光生电子空穴的分离,提高了光电降解活性.     

One-step synthesis of monodispersed Pt nanoparticles anchored on 3D graphene foams and its application for electrocatalytic hydrogen evolution

Although platinum-based materials are regarded as the state-of-the-art electro-catalysts for hydrogen evolution reaction(HER),high cost and quantity scarcity hamper their scale-up utilization in industrial deployment.Herein,a one-step strategy was developed to synthesize multi-walled carbon nanotubes and reduced graphene oxide supported Pt nanoparticle hydrogel(PtNP/rGO-MWCNT),in which only ascorbic acid was used as the reductant for one-pot reduction of both GO and chloroplatinic acid.The hydrogel can be directly used as a flexible binder-free catalytic electrode to achieve high performance of HER.Compared to conventional strategies,the current strategy not only significantly reduces the Pt loading to 3.48 wt%,simplifies the synthesis process,but also eliminates the use of any polymer binders,thus decreasing the series resistance and improving catalytic activity.An overpotential of only 11 mV was achieved on as-prepared PtNP/rGO-MWCNT to drive a geometrical current density of 10 mA/cm2 in0.5 mol/L H2 SO4,with its catalytic activity being kept over 15 h.In acidic medium,the HER activity of the PtNP/rGO-MWCNT catalyst exceeds most of the reported Pt-based electro-catalysts and is 3-fold higher than that obtained on commercial Pt/C electrode.     

Synthesis of Zinc Tetraaminophthalocyanine Functionalized Graphene Nanosheets as an Enhanced Material for Sensitive Electrochemical Determination of Uric Acid

A new electrochemical sensor material has been fabricated via the non‐covalent functionalization of reduced graphene oxide (rGO) and soluble tetramino zincphthalocyanines (ZnPc‐NH₂). Immobilization of uricase onto the synthesized nanohybrids can evidently improve the electrocatalytic activity and selectivity. The obtained composite membrane possesses a great enhancement of electron transfer rate and excellent synergistic electrocatalytic effect toward uric acid (UA) oxidation under the working potential at 0.620 V vs. Ag/AgCl with a scan rate of 0.125 V/s. The effects of the experimental parameters on the electrochemical oxidation responses of UA were investigated and optimized in detail. Under the optimized conditions, the peak currents were proportional to the UA concentration in a range from 0.5 to 100 μmol/L with detection limit of 0.15 μmol/L. Moreover, the developed sensor was applied for UA determination in human urine samples with high accuracy and satisfactory recovery, which is envisioned to have promising applications in monitoring UA in clinical research.     

Artificial Splitting of a Non‐Ribosomal Peptide Synthetase by Inserting Natural Docking Domains

The interaction in multisubunit non‐ribosomal peptide synthetases (NRPSs) is mediated by docking domains that ensure the correct subunit‐to‐subunit interaction. We introduced natural docking domains into the three‐module xefoampeptide synthetase (XfpS) to create two to three artificial NRPS XfpS subunits. The enzymatic performance of the split biosynthesis was measured by absolute quantification of the products by HPLC‐ESI‐MS. The connecting role of the docking domains was probed by deleting integral parts of them. The peptide production data was compared to soluble protein amounts of the NRPS using SDS‐PAGE. Reduced peptide synthesis was not a result of reduced soluble NRPS concentration but a consequence of the deletion of vital docking domain parts. Splitting the xefoampeptide biosynthesis polypeptide by introducing docking domains was feasible and resulted in higher amounts of product in one of the two tested split‐module cases compared to the full‐length wild‐type enzyme.     

Superwetting Patterned Membranes with an Anisotropy/Isotropy Transition: Towards Signal Expression and Liquid Permeation

Superwetting membranes with responsive properties have attracted heightened attention because of their fine‐tunable surface wettability. However, their functional diversity is severely limited by the “black‐or‐white” wettability transition. Herein, we describe a coating strategy to fabricate multifunctional responsive superwetting membranes with SiO₂/octadecylamine patterns. The adjustable patterns in the responsive region are the key factor for functional diversity. Specifically, the coated part of the membrane displayed a superhydrophobicity/superhydrophilicity transition at different pH values, whereas the uncoated part exhibited invariant superhydrophilicity. On the basis of this anisotropy/isotropy transition, the membranes can serve as either responsive permeable membranes or signal‐expression membranes, thus enabling the responsive separation and permeation of liquids with satisfactory separation efficiency (>99.90 %) and flux (ca. 60 L m^?2 h), as well as real‐time liquid signal expression with alterable signals.     

Visible light driven photocatalytic activity of ZnO/CuO nanocomposites coupled with rGO heterostructures synthesized by solid-state method for RhB dye degradation

Metal oxide frame works along with carbon materials have been attracting tremendous attention of researches as the potential materials for energy and environmental remediation. In the present work heterostructures of (ZnO/CuO)/rGO ternary nanocomposites were synthesized by solid-state method. The crystalline structure of the nanoparticles was obtained from the XRD analysis. Optical band gap of the ZnO nanoparticles (3.1 eV) is tuned to 2.8 eV in the synthesized (ZnO/CuO)/rGO ternary nanocomposites. Field emission scanning electron microscope images of the (ZnO/CuO)/rGO ternary nanocomposites revealed formation of well-developed flowers like morphology of (ZnO/CuO) nanoparticles on rGO sheets. Photoluminescence spectroscopy analysis of (ZnO/CuO)/rGO ternary nanocomposites show enhancement in the electron-hole pair separation and thereby diminishing electron-hole pairs recombination rates effectively. In the present work, the photocatalytic activity of the ZC₃G₁₅ ternary nanocomposites show 99% and 93% of degradation efficiency respectively against RhB dye and 4-chlorophenol for 20 min under visible light irradiation. Thus, the simple solid-state method provides the effective ternary nanocomposites heterostructures light harvesting material for energy and environmental remediation.     

Defluoridation in aqueous solution by a composite of reduced graphene oxide decorated with cuprous oxide via sonochemical

The World Health Organization (WHO) has recommended the fluoride level in drinking water (1.5 mg/L) and defluoridation of water is an essential to remove of fluoride from contaminated water. Hence, the effective and rapid adsorbent Cuprous oxide-reduced graphene oxide (Cu₂O-RGO) composite was developed to overwhelm this concern. Sonochemical approach was adopted for the synthesis of desirable composite which was further characterized by XRD, FTIR, SEM, and EDS. The optimized composite (30 mg) shown the significant adsorption capacity of 34 mg/g of F⁻ solution (pH = 9), 70% removal of F⁻ solution from real experiment and Freundlich model was fitted than Langmuir and Temkin isotherms. The experimental results corroborate that adsorbent is the most effective for removal of fluoride from its polluted water.     

Prokaryotic Expression and Polyclonal Antibody Preparation of PRL3

Phosphatase of regenerating liver 3(PRL3),which belongs to the superfamily of protein tyrosine phosphatases(PTPs),represents a group of low molecular weight PTPs that participate in tumorigenesis and metastasis processes.Presented here are the results of cloning,prokaryotic expression,purification,and polyclonal antibody preparation of PRL3.To obtain a specific polyclonal antibody against PRL3,the authors have prepared GST-PRL3 to immunize rabbits and purify an anti-PRL3 polyclonal antibody by negative selection affinity columns.Western blot analysis shows that the anti-PRL3 polyclonal antibody has a specific binding ability with PRL3 protein.The anti-PRL3 polyclonal antibody provides a good tool to further study the function of PRL3.     

Caseinolytic Proteins (Clp) in the Genus Klebsiella: Special Focus on ClpK

Caseinolytic proteins (Clp), which are present in both prokaryotes and eukaryotes, play a major role in cell protein quality control and survival of bacteria in harsh environmental conditions. Recently, a member of this protein family, ClpK was identified in a pathogenic strain of Klebsiella pneumoniae which was responsible for nosocomial infections. ClpK is linked to the thermal stress survival of this pathogen. The genome wide analysis of Clp proteins in Klebsiella spp. indicates that ClpK is present in only 34% of the investigated strains. This suggests that the uptake of the clpk gene is selective and may only be taken up by a pathogen that needs to survive harsh environmental conditions. In silico analyses and molecular dynamic simulations show that ClpK is mainly α-helical and is highly dynamic. ClpK was successfully expressed and purified to homogeneity using affinity and anion exchange chromatography. Biophysical characterization of ClpK showed that it is predominantly alpha-helical, and this is in agreement with in silico analysis of the protein structure. Furthermore, the purified protein is biologically active and hydrolyses ATP in a concentration- dependent manner.     

On the inflation and deflation dynamics of liquid-filled,hyperelastic balloons

We derive a reduced-order model describing the inflation and deflation dynamics of a liquid-filled hyperelastic balloon, focusing on inviscid laminar flow and the extensional motion of the balloon. We initially study the flow and pressure fields for dictated motion of the solid, which throughout deflation are obtained by solving the potential problem. However, during inflation, flow separation creates a jet within the balloon, requiring a different approach. The analyses of both flow regimes lead to a simple piecewise model, describing the fluidic pressure during inflation and deflation, which is verified by finite element computations. We then use a variational approach to derive the equation describing the interaction between the extensional mode of the balloon and the entrapped fluid, yielding a nonlinear hybrid oscillator equation. Analytical and graphical investigations of the suggested model are presented, shedding light on its static and dynamic behaviour under different operating conditions. Our simplified model and its underlying assumptions are verified utilizing a fully coupled finite element scheme, showing excellent agreement.