Broadband spectral shaping in a Ti:sapphire regenerative amplifier

A birefringent crystal quartz plate of known thickness has been used as a spectral filter for spectral shaping in a Ti:sapphire regenerative amplifier. The spectral profile of the amplified pulse ejected from the regenerative amplifier was observed while adjusting the birefringent crystal plate in the cavity. By altering the gain spectrum, the bandwidth of the regeneratively amplified pulse was increased from 18 to 35 nm by using a 0.34-mm thick birefringent plate. The output pulse spectrum from the regenerative amplifier neared the bandwidth of the seed pulse. As a comparison, we used a coated filter outside the regenerative amplifier cavity, and the bandwidth of the regeneratively amplified pulse was stretched to 28 nm. When the bandwidth was stretched to 35 nm, the pulse was compressed to 35 fs.     

低速二维流动的粒子仿真研究

本文运用信息保存法对低速二维的流动现象进行模拟，考察了低速条件下的有限平板绕流以及微槽道气体流动问题。研究表明：在对低速流动的模拟过程中，运用IP法在能够获得较好的结果的同时，具有比DSMC方法更高的计算效率。     

Security Applications of Optical Face Recognition System: Access Control in E-Learning

The educational system has gradually shifted from a face-to-face to an e-learning system, which has become prevalent in advanced countries with the advance of information technology, and connection of global networks. Accordingly, a growing demand is emerging for more reliable individual certification with technical precision in order to measure and record learning achievements and credentials of participants. The present system has a limit in terms of registration capacity, therefore, its accuracy has often been questioned. Against this background, an individual certification system is proposed particularly for access control in e-learning. Under our proposed system, a compact optical correlator for facial recognition is employed. This correlator was previously tested for of biometrics authentication accuracy and proved highly reliable, having recorded remarkably low error rates (below 1%). The recorded error rate is sufficiently robust that the system itself can be regarded as a valid and practical viable attestation system.     

关于均值KIRCHHOFF板非线性边界镇定问题的几点注记

对于均值K IRCHHOFF板非线性边界镇定问题给出几点注记.首先应用G reen公式对具有非线性边界反馈控制的均值K IRCHHOFF板所决定的非线性系统的能量衰减速度进行了重新推导,从而修正了前人的结果.然后应用极大单调函数的定义和分部积分技巧,对均值K IRCHHOFF板非线性边界镇定问题所决定的非线性算子A的极大单调性给出了重新证明,进而更正了已有文献中相应证明的欠妥之处.     

用正四棱锥形阵对声目标定位研究

文章结合声阵列在智能雷系统中的应用，提出了用立体五元声阵列对声目标进行定位，将智能雷中用于预警的传感器也参与到定位阵列中来，这样就在不增加传感器的条件下实现了市体阵列对声目标的定位。文章推导了定位公式和误差公式，并对结果进行仿真分析，与平面阵相比取得了较好的效果。不但提高了精度还降低了声阵列的盲区。     

圆柱型正交各向异性圆形薄板的非线性非对称弯曲问题（Ⅱ）

本文利用“正则摄动法”［２］研究文献［１］中由“两变量法”［３］所得到的关于Ｗｎｍ，和的递推方程和递推边界条件的求解问题。求得了本问题的一致有效渐近解，最后作为实例，我们利用“混合摄动法”［４］研究了轴对称线性弯曲问题，并将所得结果与文献［５］中给出的精确解相比较，两者基本上是一致的。     

双折射双频激光器偏振特性的分析

用激光原理和晶体光学原理分析了腔内加旋光晶体的激光器输出光的偏振特性，实验和分析表明，激光器输出两束不同频率的垂直线偏振光，激光器两端输出光的偏振面有一夹角ａ，且此夹角与晶轴和传光方向的夹角θ有关。理论计算结果在双折射双频激光器的实验结果符合很好。     

微通道板增益疲劳机理研究

微通道板的增益疲劳是微通道板的主要问题之一，本文分析了微通道板的表面结构模型，同通道板活性表面上碱金属的逸出和碳的增加是导致微通道板的增益疲劳的主要原因，另外，探讨碱金属逸出的机理和碳污染的来源，介绍延长微通道板工作寿命的有效方法。     

Deposition of Oral Bacteria and Polystyrene Particles to Quartz and Dental Enamel in a Parallel Plate and Stagnation Point Flow Chamber

The aim of this paper is to determine to what extent (i) deposition of oral bacteria and polystyrene particles, (ii) onto quartz and dental enamel with and without a salivary conditioning film, (iii) in a parallel plate (PP) and stagnation point (SP) flow chamber and at common Peclet numbers are comparable. All three bacterial strains showed different adhesion behaviors, and even Streptococcus mitis BMS, possessing a similar cell surface hydrophobicity as polystyrene particles, did not mimic polystyrene particles in its adhesion behavior, possibly as a result of the more negative ζ potentials of the polystyrene particles. The stationary endpoint adhesion of all strains, including polystyrene particles, was lower in the presence of a salivary conditioning film, while also desorption probabilities under flow were higher in the presence of a conditioning film than in its absence. Deposition onto quartz and enamel surfaces was different, but without a consistent trend valid for all strains and polystyrene particles. It is concluded that differences in experimental results exist, and the process of bacterial deposition to enamel surfaces cannot be modeled by using polystyrene particles and quartz collector surfaces.     

Optimum gas chromatographic conditions in wall-coated capillary columns. Extended and simplified forms of the Golay-equation

Band broadening in capillary columns is satisfactorily described by the Golay-equation extended to situations of appreciable pressure drop by Giddings. In practice, however, several simplifications are often made. The effect of these simplifications on the calculated values of the minimum plate height and optimum carrier gas velocity are treated systematically.