Low Ruthenium Content Confined on Boron Carbon Nitride as an Efficient and Stable Electrocatalyst for Acidic Oxygen Evolution Reaction

To date, only a few noble metal oxides exhibit the required efficiency and stability as oxygen evolution reaction (OER) catalysts under the acidic, high-voltage conditions that exist during proton exchange membrane water electrolysis (PEMWE). The high cost and scarcity of these catalysts hinder the large-scale application of PEMWE. Here, we report a novel OER electrocatalyst for OER comprised of uniformly dispersed Ru clusters confined on boron carbon nitride (BCN) support. Compared to RuO₂, our BCN-supported catalyst shows enhanced charge transfer. It displays a low overpotential of 164 mV at a current density of 10 mA cm⁻², suggesting its excellent OER catalytic activity. This catalyst was able to operate continuously for over 12 h under acidic conditions, whereas RuO₂ without any support fails in 1 h. Density functional theory (DFT) calculations confirm that the interaction between the N on BCN support and Ru clusters changes the adsorption capacity and reduces the OER energy barrier, which increases the electrocatalytic activity of Ru.     

Mechanistic Elucidations of Highly Dispersed Metalloporphyrin Metal-Organic Framework Catalysts for CO2 Electroreduction

Immobilization of porphyrin complexes into crystalline metal–organic frameworks (MOFs) enables high exposure of porphyrin active sites for CO₂ electroreduction. Herein, well-dispersed iron-porphyrin-based MOF (PCN-222(Fe)) on carbon-based electrodes revealed optimal turnover frequencies for CO₂ electroreduction to CO at 1 wt.% catalyst loading, beyond which the intrinsic catalyst activity declined due to CO₂ mass transport limitations. In situ Raman suggested that PCN-222(Fe) maintained its structure under electrochemical bias, permitting mechanistic investigations. These revealed a stepwise electron transfer-proton transfer mechanism for CO₂ electroreduction on PCN-222(Fe) electrodes, which followed a shift from a rate-limiting electron transfer to CO₂ mass transfer as the potential increased from −0.6 V to −1.0 V vs. RHE. Our results demonstrate how intrinsic catalytic investigations and in situ spectroscopy are needed to elucidate CO₂ electroreduction mechanisms on PCN-222(Fe) MOFs.     

Bulk-like Pt(100)-oriented Ultrathin Surface: Combining the Merits of Single Crystals and Nanoparticles to Boost Oxygen Reduction Reaction

Single crystal surfaces with highly coordinated sites very often hold high specific activities toward oxygen reduction reaction (ORR) and others. Transposing their high specific activity to practical high-surface-area electrocatalysts remains challenging. Here, ultrathin Pt(100) alloy surface is constructed via epitaxial growth. The surface shows 3.1–6.9 % compressive strain and bulk-like characteristics as demonstrated by site-probe reactions and different spectroscopies. Its ORR activity exceeds that of bulk Pt₃Ni(100) and Pt(111) and presents a 19-fold increase in specific activity and a 13-fold increase in mass activity relative to commercial Pt/C. Moreover, the electrochemically active surface area (ECSA) is increased by 4-fold compared to traditional thin films (e.g. NSTF), which makes the catalyst more tolerant to voltage loss at high current densities under fuel cell operation. This work broadens the family of extended surface catalysts and highlights the knowledge-driven approach in the development of advanced electrocatalysts.     

Cooperative Ni(Co)-Ru-P Sites Activate Dehydrogenation for Hydrazine Oxidation Assisting Self-powered H2 Production

Water electrolysis for H₂ production is restricted by the sluggish oxygen evolution reaction (OER). Using the thermodynamically more favorable hydrazine oxidation reaction (HzOR) to replace OER has attracted ever-growing attention. Herein, we report a twisted NiCoP nanowire array immobilized with Ru single atoms (Ru₁−NiCoP) as superior bifunctional electrocatalyst toward both HzOR and hydrogen evolution reaction (HER), realizing an ultralow working potential of −60 mV and overpotential of 32 mV for a current density of 10 mA cm⁻², respectively. Inspiringly, two-electrode electrolyzer based on overall hydrazine splitting (OHzS) demonstrates outstanding activity with a record-high current density of 522 mA cm⁻² at cell voltage of 0.3 V. DFT calculations elucidate the cooperative Ni(Co)−Ru−P sites in Ru₁−NiCoP optimize H* adsorption, and enhance adsorption of *N₂H₂ to significantly lower the energy barrier for hydrazine dehydrogenation. Moreover, a self-powered H₂ production system utilizing OHzS device driven by direct hydrazine fuel cell (DHzFC) achieve a satisfactory rate of 24.0 mol h⁻¹ m⁻².     

Directing the Selectivity of CO Electrolysis to Acetate by Constructing Metal-Organic Interfaces

Electrochemically converting CO₂ to valuable chemicals holds great promise for closing the anthropogenic carbon cycle. Owing to complex reaction pathways and shared rate-determining steps, directing the selectivity of CO₂/CO electrolysis to a specific multicarbon product is very challenging. We report here a strategy for highly selective production of acetate from CO electrolysis by constructing metal-organic interfaces. We demonstrate that the Cu-organic interfaces constructed by in situ reconstruction of Cu complexes show very impressive acetate selectivity, with a high Faradaic efficiency of 84.2 % and a carbon selectivity of 92.1 % for acetate production, in an alkaline membrane electrode assembly electrolyzer. The maximum acetate partial current density and acetate yield reach as high as 605 mA cm⁻² and 63.4 %, respectively. Thorough structural characterizations, control experiments, operando Raman spectroscopy measurements, and density functional theory calculation results indicate that the Cu-organic interface creates a favorable reaction microenvironment that enhances *CO adsorption, lowers the energy barrier for C−C coupling, and facilitates the formation of CH₃COOH over other multicarbon products, thus rationalizing the selective acetate production.     

Enhanced Electrocatalytic Water Oxidation by Interfacial Phase Transition and Photothermal Effect in Multiply Heterostructured Co9S8/Co3S4/Cu2S Nanohybrids

The rational design of advanced nanohybrids (NHs) with optimized interface electronic environment and rapid reaction kinetics is pivotal to electrocatalytic schedule. Herein, we developed a multiple heterogeneous Co₉S₈/Co₃S₄/Cu₂S nanoparticle in which Co₃S₄ germinates between Co₉S₈ and Cu₂S. Using high-angle annular-dark-field imaging and theoretical calculation, it was found that the integration of Co₉S₈ and Cu₂S tends to trigger the interface phase transition of Co₉S₈, leading to Co₃S₄ interlayer due to the low formation energy of Co₃S₄/Cu₂S (−7.61 eV) than Co₉S₈/Cu₂S (−5.86 eV). Such phase transition not only lowers the energy barrier of oxygen evolution reaction (OER, from 0.335 eV to 0.297 eV), but also increases charge carrier density (from 7.76×10¹⁴ to 2.09×10¹⁵ cm⁻³), and creates more active sites. Compared to Co₉S₈ and Cu₂S, the Co₉S₈/Co₃S₄/Cu₂S NHs also demonstrate notable photothermal effect that can heat the catalyst locally, offset the endothermic enthalpy change of OER, and promote carrier migrate, reaction intermediates adsorption/deprotonation to improve reaction kinetics. Profiting from these favorable factors, the Co₉S₈/Co₃S₄/Cu₂S catalyst only requires an OER overpotential of 181 mV and overall water splitting cell voltage of 1.43 V to driven 10 mA cm⁻² under the irradiation of near-infrared light, outperforming those without light irradiation and many reported Co-based catalysts.     

Non-Interacting Ni and Fe Dual-Atom Pair Sites in N-Doped Carbon Catalysts for Efficient Concentrating Solar-Driven Photothermal CO2 Reduction

Solar-to-chemical energy conversion under weak solar irradiation is generally difficult to meet the heat demand of CO₂ reduction. Herein, a new concentrated solar-driven photothermal system coupling a dual-metal single-atom catalyst (DSAC) with adjacent Ni−N₄ and Fe−N₄ pair sites is designed for boosting gas-solid CO₂ reduction with H₂O under simulated solar irradiation, even under ambient sunlight. As expected, the (Ni, Fe)−N−C DSAC exhibits a superior photothermal catalytic performance for CO₂ reduction to CO (86.16 μmol g⁻¹ h⁻¹), CH₄ (135.35 μmol g⁻¹ h⁻¹) and CH₃OH (59.81 μmol g⁻¹ h⁻¹), which are equivalent to 1.70-fold, 1.27-fold and 1.23-fold higher than those of the Fe−N−C catalyst, respectively. Based on theoretical simulations, the Fermi level and d-band center of Fe atom is efficiently regulated in non-interacting Ni and Fe dual-atom pair sites with electronic interaction through electron orbital hybridization on (Ni, Fe)−N−C DSAC. Crucially, the distance between adjacent Ni and Fe atoms of the Ni−N−N−Fe configuration means that the additional Ni atom as a new active site contributes to the main *COOH and *HCO₃ dissociation to optimize the corresponding energy barriers in the reaction process, leading to specific dual reaction pathways (COOH and HCO₃ pathways) for solar-driven photothermal CO₂ reduction to initial CO production.     

Enthalpy change and mechanism of oxidation of o-phenylenediamine by hydrogen peroxide catalyzed by horseradish peroxidase

The hydrogen peroxide-oxidation of o-phenylenediamine (OPD) catalyzed by horseradish peroxidase (HRP) at 37 °C in 50 mM phosphate buffer (pH 7.0) was studied by calorimetry. The apparent molar reaction enthalpy with respect to OPD and hydrogen peroxide were −447 ± 8 kJ mol⁻¹ and −298 ± 9 kJ mol⁻¹, respectively. Oxidation of OPD by H₂O₂ catalyzed by HRP (1.25 nM) at pH 7.0 and 37 °C follows a ping-pong mechanism. The maximum rate V_max (0.91 ± 0.05 μM s⁻¹), Michaelis constant for OPD K_m,S (51 ± 3 μM), Michaelis constant for hydrogen peroxide Km,H₂O₂ (136 ± 8 μM), the catalytic constant k_cat (364 ± 18 s⁻¹) and the second-order rate constants k₊₁ = (2.7 ± 0.3) × 10⁶ M⁻¹ s⁻¹ and k₊₅ = (7.1 ± 0.8) × 10⁶ M⁻¹ s⁻¹ were obtained by the initial rate method.     

2-(2-甲基烯丙基)-3-(3-甲基-1,2-丁二烯基)环己-2-烯酮重排生成八元环化合物反应机理的理论研究

采用密度泛函理论B3LYP/6-31G(d,p)方法研究了2-(2-甲基丙烯基)-3-(3-甲基-1,2-丁二烯基)环己-2-烯酮重排生成八元环化合物在气相中的反应机理. 考虑了两条可能的反应途径: 途径1包含5个过程, 途径2包含两个过程. 从能量上看, 两条途径的决定速度步均是[1,5]氢迁移. 采用自洽反应场极化连续模型(PCM模型)和极化导体模型(CPCM模型)研究了反应体系在甲苯溶液中的溶剂效应. 结果表明, 气相和溶液中途径2均是较优途径, 并且甲苯对该反应的溶剂化效应不明显. 理论研究结果与实验观察结果一致, 并很好地解释了有关实验现象.     

CF3O2自由基和NO反应机理的理论研究

用密度泛函理论(DFT)的B3LYP方法, 分别在6-31G、6-311G、6-311+G(d)基组水平上研究了CF3O2自由基和NO反应机理. 研究结果表明, CF3O2自由基和NO反应存在三条可行的反应通道, 优化得到了相应的中间体和过渡态. 从活化能看, 通道CH3O2+NO→IM1→TS1→IM2→TS2→CF3O+ONO的活化能最低, 仅为70.86 kJ•mol-1, 是主要反应通道, 主要产物是CF3O和NO2. 而通道CH3O2+NO→IM1→TS3→CF3ONO2和CH3O2+NO→TS4→IM3→TS5→IM4→TS6→CF3O+NOO的活化能较高, 故该反应难以进行.