ICP-AES测定7种花茶中8种微量元素的含量和溶出率

采用微波消解样品,电感耦合等离子体-原子发射光谱法测定了金银花、玫瑰茄、玉蝴蝶、仙人草、菊花、薰衣草、腊梅等7种花茶中Fe、Mn、Cu、Zn、Ni、Cr、Cd和Pb等元素的含量及其溶出率。结果表明,花茶中Fe含量较高,重金属Cr、Cd和Pb含量普遍较低,花茶中Cu、Zn、Mn和Ni的溶出率相对较高,Fe的溶出率较低,有害的重金属Cd、Pb和Cr的溶出率很低,此测定结果可为探讨花茶的保健作用与微量元素的相关性提供科学数据。     

红外热不对称分析用于面神经功能损伤的客观评估

健康人体的温度分布存在一种双侧对称性,当面神经功能受损时,将改变这种热分布的对称性。人体热量大多通过红外辐射的形式散发,因此利用红外热成像技术可以有效捕捉这种红外热辐射分布的改变。本文提出一种新的热不对称分析的方法——有效热面积比,即计算面部特定区域与对侧区域的温差乘以温度异常区面积与总面积之比。利用这种方法对面神经功能损伤的患者和健康人群作对照性试验,结果显示:此方法的特异性和敏感性平均为0.90和0.87,比常规方法提高了7%和26%,有效热面积比与面神经功能的损伤程度正相关,平均为0.664。因此,关于诊断和评估面神经功能,红外热成像是一种有力的工具,有效热面积比是一项高效的临床指标。     

基于RBF神经网络的较低浓度下同步荧光光谱的溢油鉴别

针对海面溢油样品的含量难以确定,同时考虑到海水掺杂及风化等问题的影响,提出了在较低非线性浓度范围内采集溢油嫌疑样品的同步荧光光谱,获取其训练样本集,利用主成分分析法(Principal com-ponent analysis,PCA)提取其特征光谱,结合径向基函数(Radial basis function,RBF)神经网络对肇事样本和嫌疑样本进行模式识别的方法。通过对相近油源原油样品分类识别研究表明:该方法仅需单次对肇事样本同步光谱测量,再借助数据分析,就可以很好区分相近油源溢油样品,外扰对识别率影响也不大。RBF神经网络算法识别率在92%左右。该结论对海洋环境中溢油的实时检测及油指纹数据信息库的建立有重要意义。     

Optimizing thermography depth probing with a dynamic thermal point spread function

Derivation of two point spread functions PSFs suitable for infrared thermograms analysis is illustrated, based on two unique approaches, one based on depth decaying limit and one on diffusion limit. Experimental work using PMMA sample with back drilled holes and pulsed thermographic routine is utilized to show the effectiveness of deconvoluting pixel temperature transient history with suggested PSF’s. Synthetic second time derivative thermograms are utilized for comparison and the signal to noise ratio is used as a figure of merit for quantification.     

热声系统中回热器特征阻抗与传播常数的研究

针对本实验室一台声驱动热声系统,采用传递函数法研究声驱动系统中回热器的特征阻抗和传播常数.通过调节谐振管长度,改变回热器表面的阻抗,从理论上分析了回热器网络传输方程中的声传播常数、特征阻抗与系统网络元件中的阻抗、导纳和流的关系.并且进一步讨论有无换热器以及不同的加热功率对回热器网络参数的影响.结论有利于进一步量化回热器的网络参数.     

试探方程法及其在非线性发展方程中的应用

提出了一种比较系统的求解非线性发展方程精确解的新方法, 即试探方程法. 以一个带5阶 导数项的非线性发展方程为例, 利用试探方程法化成初等积分形式，再利用三阶多项式的完 全判别系统求解，由此求得的精确解包括有理函数型解, 孤波解, 三角函数型周期解, 多项 式型Jacobi椭圆函数周期解和分式型Jacobi椭圆函数周期解 关键词： 试探方程法 非线性发展方程 孤波解 Jacobi椭圆函数 周期解     

980 nm脉冲激发下Er3+掺杂材料中4Ⅰ13/2→4Ⅰ15/2跃迁的瞬态行为

在过去的几十年人们对Er3+掺杂的玻璃材料进行了广泛的研究,因为Er3+的4Ⅰ13/2→4Ⅰ15/2跃迁能够给出适合红外光通讯窗口的1.5 μm的发射.据我们所知,目前关于脉冲激光激发下Er3+掺杂材料1.5 μm发射的动力学行为研究报道仍很少.我们引入了转移函数理论,研究了980nm脉冲激发下Er3+的4Ⅰ13/2能级荧光的动力学行为.发现在980nm脉冲激发后,其荧光衰减遵循双指数规律,4Ⅰ13/2能级布居分为指数上升和指数下降两个过程.     

Intensity Correlation Function of a Single-Mode Laser Driven by Colored Cross-Correlation Noises in Modulation of a Bias Signal

By using the linear approximation method, the intensity correlation function is calculated for a single-mode laser modulated by a bias signal and driven by colored pump and quantum noises with colored cross-correlation. We found that, when the correlation time between the two noises is very short, the behavior of the intensity correlation function versus the time, in addition to decreasing monotonously, also exhibits several cases, such as one maximum, one minimum, and two extrema. When the correlation time between the two noises is very long, the behavior of the intensity correlation function exhibits oscillation and the envelope is similar to the case of short cross-correlation time.     

Multipeak fitting analysis of Raman spectra on DLCH film

The hydrogenated diamond‐like carbon (DLCH) film with 1‐µm thickness is deposited by direct hydrocarbon gas ion beam method on silicon wafer and annealed at 400 °C. Detailed Raman spectra feature are fitted from nine sets of different peak fitting functions, including Gaussian, Lorentzian and Breit‐Wigner‐Fano (BWF) functions. These fitting results obtained from a two‐peak combination show some specific variances on the G peak position, FWHM_G and I_D/I_G ratio for as‐deposited and as‐annealed DLCH films. The most popular two‐peak fitting method with full Gaussian function tends to exhibit a higher ratio of the G peak position shift and higher I_D/I_G ratio than others fitting methods, the drastic difference among the most popular G (G) & G (D) and B (G) & L (D) schemes also have brought out in I_D/I_G ratio. However, for a more complex four‐peak Gaussian function fitting Raman spectra, the I_D/I_G ratio is close to that of a two‐peak fitting function with a mixture functions of BWF (G) and L (D). Furthermore, a series of systematic peak fitting procedures and comparisons of Raman spectra have been discussed in this study. Copyright © 2009 John Wiley & Sons, Ltd.     

基于Marangoni界面效应的数控化学抛光去除函数的研究

 利用基于Marangoni界面效应对化学抛光去除函数的理论及实验进行研究,提出采用湿法化学抛光（刻蚀）方法为大口径高精度光学元件的加工提供新的解决途径。介绍了Marangoni界面效应及其验证实验,运用WYKO轮廓仪对熔石英基片局域刻蚀前后的粗糙度进行检测,结果表明,粗糙度基本无变化,刻蚀前后粗糙度分别为0.72 nm和0.71 nm。基于Preston假设, 建立了数控化学抛光理论模型,运用WYKO干涉仪观察实验现象可知,化学抛光刻蚀曲线基本上成平底陡峭的去除函数曲线,小磨头抛光是倒置的仿高斯函数曲线。