冰晶石型氟化物(NH_4)_3FeF_6的水热合成及其磁学性质

首次采用水热法合成了冰晶石型氟化合物(NH_4)_3FeF_6,其结构和性质经X-射线粉末衍射、扫描电子显微镜和差热-热重分析表征。(NH_4)_3FeF_6属立方晶系,空间群Fm-3m,晶胞参数a=b=c=0.913 0 nm。对磁化率进行了表征。结果表明:随着温度降低,磁有序与晶体特征和孤立的磁单元有关。     

Exploring the effect of radiation crosslinking on the physico‐mechanical,dynamic mechanical and dielectric properties of EOC–PDMS blends for cable insulation applications

This work focuses on the effect of electron beam irradiation on the physico‐mechanical, dynamic mechanical and dielectric properties of blends based on ethylene octene copolymer (EOC) and poly dimethyl siloxane (PDMS) rubber. It is found that electron beam irradiation caused considerable improvement in the physico‐mechanical properties; the tensile strength was enhanced by nearly 35% for 70:30 EOC:PDMS blend. Phase morphology of the blends analyzed before irradiation by scanning electron microscopy (SEM) exhibited droplet/matrix morphology with sizes of the PDMS rubber domain varying from 0.55 µm to 0.47 µm as the amount of PDMS rubber decreased from 30 wt% to 10 wt%. This reduction in the PDMS rubber domain has been correlated with the physico‐mechanical properties of the blends. Further, the dynamic mechanical properties and creep behavior of these EOC:PDMS blends before and after irradiation has been studied. It is inferred that the 70:30 blend after radiation crosslinking shows a 17% decrease in the creep compliance, i.e. higher creep resistance compared to neat blends. All the radiation crosslinked blends exhibited lower dielectric constant, lower dielectric loss and higher electrical resistivity as compared to the virgin blends which makes it suitable for cable insulating application. Copyright © 2016 John Wiley & Sons, Ltd.     

Effect of chain structure on the glass transition temperature and viscoelastic property of cis‐1,4‐polybutadiene via molecular simulation

In this work, by adopting the united atom model of cis‐1,4‐poly(butadiene) (PB), we systemically investigate the effect of the chain structure on the glass transition temperature (T_g) and the viscoelastic property of PB system. First, we analyze the atom translational mobility, bond reorientation dynamics, torsional dynamics, conformational transition rate, and dynamic heterogeneity of the PB chains with different chain structures in detail by determining the corresponding T_g. In addition, our results clearly indicate that with the decrease of the amount of the free end atoms of PB via the end‐linking method, the mobility of the PB chains quickly decreases. As a result, the T_g of the PB chains gradually increases. Depending on the chain structure and the calculation method, the T_g of the PB chains varies from 154 to 240 K. In addition, the temperature dependence of the dynamic properties has different Arrhenius behaviors above and below T_g. The calculated activation energy varies from 7.37 to 16.37 KJ/mol for different chain structures above T_g, which can be compared with those for other polymers. In addition, through the end‐linking approach the strong interaction between the PB chains improves the storage modulus G′ and the loss modulus . Meanwhile, the immobility of the free end atoms effectively reduces the friction loss of the chains under the shear field, which is reflected by the low loss factor . In summary, this work can further help to understand the effect of the chain structure on the dynamic properties of the PB chains. Meanwhile, it provides an effective approach to reduce the energy loss during the dynamic periodic deformation, which can cut the fuel consumption via the end‐linking method. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1005–1016     

羧甲基纤维素钠修饰的聚氨酯泡沫制备磁性吸油材料

采用聚氨酯泡沫为模板,依次修饰羧甲基纤维素钠(CMC)、Fe~(3+),在惰性气氛中高温热处理反应,制备多孔结构的磁性吸油材料.用光学显微镜、扫描电子显微镜、红外吸收光谱、X-射线衍射、接触角等技术对材料进行表征.详细考察了加热反应温度、CMC浓度和Fe~(3+)浓度对材料吸油性能和磁性的影响规律.实验表明,当加热反应温度选择230°C,CMC浓度为0.3 wt%,FeCl_3浓度为0.1 mol/L时,材料吸油性能最佳,对正己烷、二甲苯、环己烷、甲苯、乙酸乙酯、氯仿、机油、原油等有机溶剂和油类分子的吸附容量为10倍左右.磁性多孔材料具有明显的亲油、疏水特性,水的接触角达115.9°,同时材料密度只有0.036g/cm~3,能够漂浮于水面,实现对水面有机溶剂的快速吸附.吸附后的材料在外界磁场控制下,能够通过磁分离方式从水面快速分离.该材料具有良好的循环利用性能,可重复使用20次以上,吸油性能仍然保持良好.     

芴基张力半导体结构和光电性质的理论研究

[4]Cyclo-9, 9-dimethyl-2, 7-fluorenylene ([4]CF) was used as a model compound to explore the steric strain effect on the structures and photoelectrical properties of materials. A series of strained cyclic polyfluorene materials, [n]CFs (n=3-8), was designed. It was found that the strain energy decreased and the energy gap increased as the number of n and ring diameter increased. The ionization potential and electronic affinity tended to increase and decrease as the strain energy decreased at the same number of [n]CFs, respectively. With a balance between hole and electron reorganization energies in the system, these compounds demonstrated great potential as ambipolar materials. It was also found that [n]CFs showed an obvious blue shift in their emission spectra wavelengths (λ_em2) as the strain energy decreased. Steric strain provides a powerful tool for the design of multifunctional semiconductors in organic optoelectronics.     

含酯基Gemini表面活性剂在有机醇-水体系中的胶束热力学及聚集行为

采用电导法研究了不同温度下含酯基Gemini表面活性剂在纯水和在质量分数为10%的甲醇-水(MAWR),乙二醇-水(EG-WR),丙三醇-水(GL-WR)四种体系中的集聚行为和胶束热力学;聚集行为参数包括临界胶束浓度(cmc)和抗衡离子的解离程度(α)以及胶束的热力学参数,包括标准吉布斯自由能(ΔG_m~o)、吉布斯迁移自由能(ΔG_(trans)~o)、吉布斯烷基链胶束化自由能(ΔG_(tail)~o)、标准焓变(ΔH_m~o)和标准熵变(ΔS_m~o),均被计算和讨论。研究表明在所有的研究体系中,cmc值随着疏水链的增加而减小,随着加入的醇结构中羟基数目的增加而增大,随温度的升高先变小,后变大呈U字形;胶束化过程都是自发进行的,并且在293.15 K下,胶束化过程是吸热的,在293.15 K上,胶束化过程是放热的;通过稳态荧光光谱法研究了表面活性剂在纯水、有机醇-水混合溶液中的微极性,结果表明,在相同溶剂中,随着烷基链长度的增加,溶液微环境的疏水性越强;对于相同的Gemini表面活性剂,随着加入含羟基数目越多的醇,其微环境的疏水性越强。并研究了Gemini表面活性剂在混合体系中形成胶束过程的焓-熵补偿曲线。     

含铵根离子等规聚丙烯离聚体的合成及性能研究

合成了一系列高分子量、窄分子量分布且高等规度,含有不同―NR_3~+X~-离子基团含量的聚丙烯离聚体(iPP-NR_3~+X~-).以PP/IUD共聚物作为反应中间体,与三乙胺或N-甲基咪唑氨化得到聚丙烯离聚体.通过离子交换反应制备不同反离子的N-甲基咪唑聚丙烯离聚体,包括双三氟甲基磺酰亚胺根离子(Tf_2N~-)、四氟硼酸根离子(BF_4~-)和六氟磷酸根离子(PF_6~-).热重分析结果发现N-甲基咪唑聚丙烯离聚体的热稳定性明显优于三乙胺聚丙烯离聚体,表明不含β-H的N-甲基咪唑聚丙烯离聚体具有较高的热稳定性.同时,聚丙烯离聚体的表面亲水性得到明显改善.并且,聚丙烯离聚体的断裂伸长率也得到显著提高,最高达到900%.比较不同反离子聚丙烯离聚体的屈服强度和断裂强度发现I~-聚丙烯离聚体具有最优的力学性能.     

异相成核和拉伸诱导对生物基PHBV复合纤维结晶结构与力学性能的影响

采用熔融纺丝法制备了聚(3-羟基丁酸酯-co-3-羟基戊酸酯)(PHBV)/二硫化钨(WS_2)复合纤维.利用示差扫描量热仪(DSC)、热台偏光显微镜、二维广角射线衍射仪(2D-WXRD)、纤维强力仪研究了WS_2异相成核作用和牵伸诱导作用对纤维的结晶结构和力学性能的影响.研究表明,WS_2显著提高了PHBV的结晶温度,当使用2 wt%WS_2时,复合材料的结晶温度提高到115~130oC,比纯PHBV(99~105oC)提高了约25oC.WS_2不仅没有影响PHBV球晶的径向生长速率,且明显提高了PHBV/WS_2复合材料的晶核密度,熔体成核活性Φ由1.0降低为0.49.随着牵伸倍率和WS_2用量的增加,纤维的拉伸强度呈现出先增加后减小的趋势.当添加1 wt%WS_2并采用单向牵伸3.8倍时,纤维中的晶体取向产生了β晶结构,使复合纤维的拉伸强度由纯PHBV的37 MPa提高至155 MPa,断裂伸长率由2.4%增加至45%.     

共沉淀法制备六方相ITO纳米粉体及其光电性能

以金属In、SnCl_4·5H_2O为原料、尿素为沉淀剂,采用共沉淀法加入(NH_4)_2SO_4,制备出六方相ITO纳米粉体。通过XRD、TEM、四探针电阻仪、荧光光谱仪以及XPS,研究了ITO粉体的晶型、颗粒形貌、电性能以及光性能。结果表明:加入(NH_4)_2SO_4后,ITO粉体形貌由类菱面体和类球形混合体转变为类球形;不加(NH_4)_2SO_4时晶型为立方相结构,当(NH_4)_2SO_4与铟的物质的量之比为1∶3.45和1∶1.73时粉体晶型转变为六方相结构,继续添加(NH_4)_2SO_4晶型又转变为立方相结构。立方相ITO粉体的电阻率较低为0.64Ω·cm,六方相ITO粉体在相同激发波长下,发射光强度相对较高。     

过渡元素掺杂Fe_3O_4(001)表面磁电性能的理论研究

采用基于密度泛函理论的第一性原理方法,计算Fe_3O_4,Fe_3O_4(001)表面以及过渡元素掺杂表面的电子结构和磁性。结果表明Fe_3O_4的半金属性主要来源于B位Fe离子,并且Fe的3d轨道发生强烈自旋极化;比较(001)表面不同终端A和B终端的表面能和电子结构,得出两种终端稳定性存在差异且A终端较稳定同时表现半金属性;由过渡元素V、Cr、Mn、Co、Cu和Zn取代Fe_3O_4(001)表面A终端A位Fe进行掺杂,形成的6种新表面结构都保持了半金属性。对比它们的表面能和磁矩,Mn掺杂的表面结构最稳定并且磁矩明显增大。