光放大器前置可调光学滤波器

介绍Ｆ－Ｐ干涉滤波器实现中心波长可调的两种机理，给出通过改变腔距来改变中心波工的滤波器的典型结构，并且给出了相应的电压驱动电路，实验表明选择合适的光放大器前置滤波器可以提高系统的灵敏度。     

A notch filter for 140 GHz microwave radiation

The construction of a notch-filter for 140 GHz with very low passband insertion loss is described. It is based on a single-mode rectangular waveguide and cylindrical cavities matched to it. The typical transmission characteristic is also presented.     

A New Method for Rotation and Brightness Invariant Pattern Recognition Based on Modified Multiple Circular Harmonic Expansions

A new method for rotation and brightness invariant pattern recognition was proposed by applying multiple circular harmonic expansions to the joint transform correlator. The amplitudes of the multiple orders of circular harmonic expansions made from a detecting image were synthetically modified to respond to the same auto-correlation peaks. These modified circular harmonic expansions were arranged in the input plane as reference patterns together with an arbitrary target pattern, and the correlation signals between them were calculated in the subtracted joint transform correlator. The fraction of the correlation-peak intensities between the target and the references were extracted as a new discrimination parameter. This new parameter performs pattern recognition under rotation and brightness invariance with good discriminability. Its high discriminability has been proved in computer simulations using the face image patterns of many individuals.     

经纬仪二轴正交调整方法

本文叙述了经纬仪二轴正交调整的四种方法,其中对偏反射镜法作了理论分析。     

Production and characterization of refractive index gratings in high-birefringence fibre optics

In this work, we report production and modelling of both Bragg gratings and rocking filters in high birefringence fibre optics. Bragg gratings are produced by UV (257.0 nm) external interferometric exposition of a frequency-doubled Ar⁺ ion laser, whereas for rocking filters formation the visible Ar⁺ ion laser lines in 488.0 and 514.5 nm are used in an internal method. The spectral characteristics due to the birefringence properties are studied through numerical methods and experimental techniques. The spectral responsivity of the structures under temperature changes and stress application is presented.     

Corrected mirror systems with double reflection

We propose objectives consisting of two mirrors with central holes for passage of a light beam. The optical layout ensures multiple reflection of rays from both mirrors. We consider several approaches to calculating the design parameters for which three and four aberrations do not occur. The objectives can be used in optical devices operating in the UV and IR regions of the spectrum. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 2, pp. 267–270, March–April, 2007.     

UV protection filters by dielectric multilayer thin films on Glass BK-7 and Infrasil 301

The increasing use of Ultraviolet (UV) light in medicine, industrial environments, for cosmetic use, and even in consumer products necessitates that greater attention be paid to the potential hazards of this type of electromagnetic radiation. To avoid any adverse effects of exposure to this type of radiation, four suitable protection filters were produced to block three UV bands (UVA, UVB, and UVC). The design structure of the required dielectric multilayer filters was done by optical thin film technology using the absorbing property of UV radiation for the substrates and dielectric materials. The computer analyses of the multilayer filter formulas were prepared using Macleod Software for the production processes. The deposition technique was achieved on optical substrates (Glass BK-7 and Infrasil 301) by dielectric material combinations including Titanium dioxide (Ti₂O₃), Hafnium dioxide (HfO₂), and Lima (mixture of oxides SiO₂/Al₂O₃); deposition being achieved using an electron beam gun. The output results of the theoretical and experimental transmittance values for spectral band from 200 nm to 800 nm were discussed in four processes. To analyze the suitability for use in ‘real world’ applications, the test pieces were subjected to the durability tests (adhesion, abrasion resistance, and humidity) according to Military Standard MIL-C-675C and MIL-C-48497A.     

关于Noetherian环上拓扑滤子交换性的一个注记

Let R be a ring with identity,and R-fil denote the set of all left topolo-gizing filters on R.In this paper,we give a sufficient condition for the commutativityof R-fil under the hypothesis of left Noetherianness,as well as some examples.     

一种基于粒子滤波的测向定位跟踪算法

基于多站测向定位提供的目标辐射源方位角信息,提出了一种基于粒子滤波的测向定位跟踪算法.该算法采用序贯蒙特卡罗的粒子滤波技术,对目标辐射源方位信息进行粒子滤波融合处理,实现了对机动目标辐射源的无源定位跟踪.仿真实验表明,该算法适用于非线性模型和非高斯噪声的目标跟踪,与传统的基于卡尔曼滤波的多传感器融合跟踪算法相比,定位跟踪更为精确,从而对提高战场电子目标定位跟踪和精确打击具有广泛的应用价值.     

短波通滤光片膜系设计

详细介绍用等效折射率概念设计短波通滤光片的原理和计算方法。根据原理和方法，选择二氧化钛（TiO2）作为高折射率材料、二氧化硅（SiO2）作为低折射率材料。首先从理论上计算出用这2种材料设计的波长λ=950～1150nm的短波通滤光片所需要的周期数，然后给出短波通滤光片的主膜系和光谱曲线。由于据此周期数设计出的膜系光谱曲线在750～810nm处的透过率不符合要求，因此对该膜系进行了改进。依照改进的设计进行多次制备，最终制备出了符合要求的短波通滤光片，找到了最佳制备工艺和方法。最后，对制备出来的短波通滤光片薄膜进行了各种环境实验。实验结果表明，膜层的各项指标符合设计要求。