Analysis of retroreflector-introduced spectrum distortion in birefringent crystal-based interleaver filters

Spectrum distortion in a birefringent crystal-based interleaver filter introduced by the right-angle total internal reflection retroreflector is studied. The phase shift between two perpendicularly polarized components of the polarized light incident onto the retroreflector is calculated. The sensitivity of the phase shift to the incident angle for different materials from which the retroreflector is made is also considered. This study indicates that the phase shift is less sensitive to the incident angle for retroreflectors having a higher index of refraction, suggesting a fixed-phase compensator that can be used to cancel out the phase shift introduced by the retroreflector to recover the interleaver filter's spectrum. The fold-back 50 GHz channel spacing birefringent crystal interleaver filter is fabricated to demonstrate that the spectrum distortion due to the phase shift introduced by retroreflector can be eliminated by a phase compensator.     

平面反射镜表面散射光干涉

激光束照射到表面被粘污的反射镜上会产生干涉环,入射光束和反射光束在被粘污表面产生散射光干涉.随着入射角的变化,光束在反射镜玻璃片内光程改变,引起干涉环从中心冒出或缩进,干涉环级数的变化与入射角的平方成正比.     

Identification of a fault zone ahead of the tunnel excavation face using the extended Kalman filter

Simulation of mechanized tunneling and on-site excavation require very good knowledge of the geomechanical and material properties. Identification of the material must be fast and continuously performed during tunnel excavation for the best possible strategies for advancing the tunnel boring machine. We present in this work the use of the extended Kalman filter (EKF) for identification of the inclined fault zone ahead of the face. The EKF showed fast and stable convergence of the model parameters under study. In comparison with the particle swarm optimization technique applied to the same back analysis problem, faster convergence of the identified parameters as well as high robustness with respect to the choice of the initial parameter values have been observed.     

道路约束条件下的移动机器人跟踪

为提高移动机器人的位置估计精度和跟踪效果,提出一种基于道路约束条件下的移动机器人鲁棒约束H∞滤波(CHF)跟踪算法.首先,将机器人移动的道路网络作为跟踪的约束条件,并利用当前统计模型对机器人的运动进行建模.其次,将道路约束条件作为机器人跟踪的非线性状态约束,利用最小协方差估计推导了鲁棒CHF递推方程.通过拉格朗日乘子法对非线性约束优化估计问题进行求解,并利用约束信息对CHF算法的状态更新过程进行了改进.最后,通过对CHF算法和无约束的H∞滤波算法的跟踪性能进行了对比分析和验证.仿真结果表明,该算法可以实现机器人的跟踪,且跟踪精度优于HF算法.     

Efficient removal of unwanted signals in NMR spectra using the filter diagonalization method

It is often desirable to selectively remove corrupting or uninteresting signals from complex NMR spectra without disturbing overlapping or nearby signals. For biofluids in particular, removal of solvent and urea signals is important for retaining quantitative accuracy in NMR‐based metabonomics. This article presents a novel algorithm for efficient filtering of unwanted signals using the filter diagonalization method (FDM). Unwanted signals are modeled in the time domain using FDM. This modeled signal is subtracted from the original free induction decay. The resulting corrected signal is then processed using established workflow. The algorithm is found to be reliable and fast. By eliminating large, broad, uninteresting signals, many spectra can be subjected to fully automated absolute value processing, allowing objective preparation of spectra for pattern recognition analysis. Copyright © 2009 John Wiley & Sons, Ltd.     

HER磁镜装置中Hα测量及结果

本文描述HER磁镜中Ha面发光度时空分布的测量,发现等离子体发光,扰动,工作模式等呈环状结构;一个良好的热电子环可以抑制扰动环区的低频扰动。     

用多色菲涅耳全息滤波器作彩色图像特征识别

本文在用多色匹配滤波器(MSF)作彩色图像相关检测和用菲涅耳全息滤波器(FHF)作无透镜强度相关的基础上,提出一种把两者结合起来的技术,即用多色菲涅耳全息滤波器实现彩色图像的相关检测.     

刀口定量检验技术的研究

主要介绍了天文镜面加工的中的刀口定量检验技术，包括阴影图像ＣＣＤ实时采集，图像处理，定量计算。     

光学相干层析系统的耦合效率分析

在高斯光束传输理论的基础上，利用矩阵光学原理和高斯光束耦合理论，得出光学相干层析系统中参考反射镜的空间位置对系统耦合效率影响的表达式，并用计算机模拟系统的耦合效率与参考反射镜和棒透镜间的距离及参考反射镜偏转角度的关系曲线。实验结果和理论分析相符合。     

Spectral characterization of EUV radiation emitted from a laser-irradiated gas puff target

A laser-plasma EUV source is described, which is going to be utilized for characterization of EUV optical components and sensoric devices in the wavelength region from 11 to 13 nm. EUV radiation is generated by focusing a Nd:YAG laser into a double stream gas puff target. By the use of different target gases, broadband as well as narrow-band EUV radiation can be obtained. The emission characteristics of the radiation is monitored by the help of different diagnostic tools including a pinhole camera, an EUV spectrometer, and various EUV photodiodes, either directly or after reflection from multilayer mirrors. Theoretical calculations of collision-induced energy transfer are given in order to explain the observed high degree of electronic excitation in the utilized target gases.