Exact Finite-Dimensional Filter for Exponential Functionals of the State of Beneš Systems

The purpose of this article is to derive finite-dimensional filters for exponential functionals of the state of nonlinear Bene? type filtering systems with correlated noises. These new filters can be applied in the state reconstruction of doubly–stochastic auto–regressive processes.     

Low power Electro-optical filter: Constructed using silicon nanobeam resonator and PIN junction

In this paper, a high tunable Electro-optical filter is designed and simulated with low electric power consumption. A silicon nanobeam resonator based on one-dimensional photonic crystal in the form of Fabry–Perot structure, silicon-on-insulator waveguide, is proposed with a PIN junction. In designing nanobeam resonator, “deterministic design method” is used to achieve the high quality factor and high-transmission rate. Tuning of the resonant wavelength in the output channel of the filter is achieved by manipulating the refractive index of the active area by using the free-carrier dispersion effect. The output wavelengths of designed device can be tuned for the telecom-friendly 1.55 µm range. The device shows a wavelength shift higher than 3 nm for a power consumption of only 0.9 mW. Finally, the simulation results show that the provided device can be considered as a narrowband and tunable Electro-optical filter that is suitable for DWDM communication system.     

(Quasi‐)Racemic X‐ray Structures of Glycosylated and Non‐Glycosylated Forms of the Chemokine Ser‐CCL1 Prepared by Total Chemical Synthesis

Our goal was to obtain the X‐ray crystal structure of the glycosylated chemokine Ser‐CCL1. Glycoproteins can be hard to crystallize because of the heterogeneity of the oligosaccharide (glycan) moiety. We used glycosylated Ser‐CCL1 that had been prepared by total chemical synthesis as a homogeneous compound containing an N‐linked asialo biantennary nonasaccharide glycan moiety of defined covalent structure. Facile crystal formation occurred from a quasi‐racemic mixture consisting of glycosylated L ‐protein and non‐glycosylated‐D ‐protein, while no crystals were obtained from the glycosylated L ‐protein alone. The structure was solved at a resolution of 2.6–2.1 Å. However, the glycan moiety was disordered: only the N‐linked GlcNAc sugar was well‐defined in the electron density map. A racemic mixture of the protein enantiomers L ‐Ser‐CCL1 and D ‐Ser‐CCL1 was also crystallized, and the structure of the true racemate was solved at a resolution of 2.7–2.15 Å. Superimposition of the structures of the protein moieties of L ‐Ser‐CCL1 and glycosylated‐L ‐Ser‐CCL1 revealed there was no significant alteration of the protein structure by N‐glycosylation.     

Performance of an optical stabilization system at NSLS beamline U12IR

A low-cost optical feedback system using dynamic mirrors has been developed at the NSLS for stabilizing the position and direction of an infrared synchrotron beam against thermal drift and mechanical noise. The system design has some unique features that potentially simplify installation into an existing infrared beamline. We describe the system and its features along with some performance results.     

声速测量及声波的波动学规律研究

声速除了可利用共振干涉法和相位比较法测量外,还可以用干涉、衍射及“洛埃镜”反射等方法测量．声速实验的改进,不仅可扩展声速测量的方法,而且也可加深学生对波动学规律和本质的理解．     

活性炭复合滤嘴吸附性能的热脱附研究

采用热脱附与气相色谱-质谱联用技术对活性炭滤嘴中活性炭和乙酸纤维脱附的组分进行了定性分析,并用峰面积归一化法测定了所含挥发性成分的质量分数,活性炭脱附组分共鉴定出芳香族化合物、醛酮类、烟碱、酸类、酯类等62种挥发性化合物.结果表明方法具有较好的重现性;为评价活性炭滤嘴的吸附性能提供了一种参考方法.     

聚乳酸熔体纺丝、粘接和吸附性能的初步研究

针对制备香烟过滤嘴用丝束和过滤嘴棒的特殊需要,研究了聚乳酸的纺丝、粘接和吸附性能,通过流变学测量考察了各种加工因素对熔体流动性和可纺性的影响,特别是残留水分的影响,用分子量、DSC和力学性能测量跟踪了熔体纺丝和后加工过程.所获结果对确定聚乳酸树脂的规格范围,确定纺丝和后加工工艺,具有参考价值.     

光谱导数Kalman滤波同时测定苯酚-邻氯苯酚和2,4二氯苯酚

文中提出了一个新的、稳定的光谱导数Kalman滤波紫外分光光度法同时定量分析方法,并且成功地将其应用于极难分辨的苯酚-邻氯苯酚和2,4二氯苯酚三组分混合体系的同时测量.选择分析光谱导数的原因是其不仅包含着吸光度,还包括在指定波长位置变化趋向等更多的信息量,这样更利于在吸收峰重叠的位置捕捉有较大差异的信号.利用Kalman滤波可以解决由光谱导数而引起的噪声放大问题,也可以过滤源于实验的噪声以及来自传递模型误差.在260～290 nm区间测量了30组浓度各自在1～10 mg·L-1范围的苯酚-邻氯苯酚和2,4二氯苯酚标准混合溶液紫外吸收光谱图.利用分段延伸高次多项式回归模拟求导准确获得吸光度导数,并且利用偏最小二乘法将其制作成Kalman滤波标准工作系数矩阵.通过随机线性离散系统的Kalman滤波器最优平滑计算,对混合体系中的各组分进行定量分析.回收实验显示出,光谱导数Kalman滤波分析法应用于本实验的极难分辨的三组分体系,得到了非常高的回收率,并且在整个实验范围内光谱导数Kalman滤波分析法具有非常好的稳定性.     

阵列波导光栅梳状带通滤波器的传输效率

在光波导模场分布高斯近似条件下,根据星形光波导耦合器的耦合特性,推导出了基于累加运算和卷积运算近似表达的阵列波导光栅梳状带通滤波器光谱响应效率的函数表达式。给出了阵列波导光栅梳状带通滤波器光谱响应效率曲线的半最大值全宽度和阵列波导光栅梳状带通滤波器的通道中心波长的光谱响应度与器件参数的关系。在输入信号光谱分布高斯近似条件下,给出了阵列波导光栅梳状带通滤波器信号通道传输效率的计算表达式和输入信号光谱宽度对阵列波导光栅梳状带通滤波器信号通道输出特性的影响。给出了物理意义明确的函数表达式,它们可为快速分析阵列波导光栅梳状带通滤波器的特性提供理论基础。     

应用高光谱仪探测叶片反射光谱中的荧光

介绍了一种利用光谱仪进行荧光测量的方法。采用LI 1800_12S积分球,耦合ASD地物光谱仪,在光源前面分别加载长波通、短波通截止滤光片,按照不同算法提取叶片表观反射光谱中的荧光。结果表明利用长波通滤光片测得的表观反射率差值光谱可以代表荧光光谱,在红光区和远红光区表现为明显的双峰特征,不同截止波长滤光片提取的荧光强度不同。采用短波通滤光片可直接获得荧光光谱,不同植物种类荧光光谱差异明显。此法对于植物被动荧光遥感探测及叶绿素荧光仪的研制和开发具有一定参考价值。