地球静止轨道远程交会过程导航性能评估

远程交会是静止轨道共位卫星自主定点置入的关键途径。针对远程交会过程中大距离跨度下相对运动模型的误差信号特性,理论推导了误差的传递机理,给出了相对导航EKF算法期望及噪声特性的定量分析模型。研究表明,确定距离区间存在最优过程噪声量级及其对应的最优滤波性能,且滤波误差与交会距离正相关,可作为全局最优滤波器的定量设计依据,解决了静止轨道远程交会过程EKF导航算法性能的量化评估问题。仿真表明,分析结论正确,相对速度滤波误差全程优于0.005 m/s(1σ),满足交会任务需求。     

Investigation of quadrature imbalance compensation algorithm for coherent 6PolSK-QPSK

6PolSK-QPSK is a promising modulation format in optical fiber communication. Because of the damage suffered during the transmission and reception, a series of algorithms are needed to be adopted to recover the original data. We proposed a novel quadrature imbalance compensation algorithm based on the data statistical properties. Simulation results show that the quadrature imbalance can be well compensated with the proposed algorithm.     

Gaussian pre-filtering for uncertainty minimization in digital image correlation using numerically-designed speckle patterns

This paper discusses the effect of pre-processing image blurring on the uncertainty of two-dimensional digital image correlation (DIC) measurements for the specific case of numerically-designed speckle patterns having particles with well-defined and consistent shape, size and spacing. Such patterns are more suitable for large measurement surfaces on large-scale specimens than traditional spray-painted random patterns without well-defined particles. The methodology consists of numerical simulations where Gaussian digital filters with varying standard deviation are applied to a reference speckle pattern. To simplify the pattern application process for large areas and increase contrast to reduce measurement uncertainty, the speckle shape, mean size and on-center spacing were selected to be representative of numerically-designed patterns that can be applied on large surfaces through different techniques (e.g., spray-painting through stencils). Such “designer patterns” are characterized by well-defined regions of non-zero frequency content and non-zero peaks, and are fundamentally different from typical spray-painted patterns whose frequency content exhibits near-zero peaks. The effect of blurring filters is examined for constant, linear, quadratic and cubic displacement fields. Maximum strains between ±250 and ±20,000 µε are simulated, thus covering a relevant range for structural materials subjected to service and ultimate stresses. The robustness of the simulation procedure is verified experimentally using a physical speckle pattern subjected to constant displacements. The stability of the relation between standard deviation of the Gaussian filter and measurement uncertainty is assessed for linear displacement fields at varying image noise levels, subset size, and frequency content of the speckle pattern. It is shown that bias error as well as measurement uncertainty are minimized through Gaussian pre-filtering. This finding does not apply to typical spray-painted patterns without well-defined particles, for which image blurring is only beneficial in reducing bias errors.     

Handling uncertainties in toxicity modelling using a fuzzy filter

A fundamental concern in the Quantitative Structure-Activity Relationship approach to toxicity evaluation is the generalization of the model over a wide range of compounds. The data driven modelling of toxicity, due to the complex and ill-defined nature of eco-toxicological systems, is an uncertain process. The development of a toxicity predicting model without considering uncertainties may produce a model with a low generalization performance. This study presents a novel approach to toxicity modelling that handles the involved uncertainties using a fuzzy filter, and thus improves the generalization capability of the model. The method is illustrated by considering a data set dealing with the fathead minnow (Pimephales promelas) toxicity of 568 organic compounds.     

Quadrupole mass filter operation under the influence of magnetic field

This work demonstrates resolution enhancement of a quadrupole mass filter (QMF) under the influence of a static magnetic field. Generally, QMF resolution can be improved by increasing the number of rf cycles an ion experiences when passing through the mass filter. In order to improve the resolution, the dimensions of the QMF or the operating parameters need to be changed. However, geometric modifications to improve performance increase the manufacturing cost and usually the size of the instrument. By applying a magnetic field, a low‐cost, small footprint instrument with reduced power requirements can be realized. Significant improvement in QMF resolution was observed experimentally for certain magnetic field conditions, and these have been explained in terms of our theoretical model developed at the University of Liverpool. This model is capable of accurate simulation of spectra allowing the user to specify different values of mass spectrometer dimensions and applied input signals. The model predicts enhanced instrument resolution R>26 000 for a CO₂ and N₂ mixture with a 200‐mm long mass filter operating in stability zone 3 via application of an axial magnetic field. Copyright © 2013 John Wiley & Sons, Ltd.     

Calorimetric Estimation Employing the Unscented Kalman Filter for a Batch Emulsion Polymerization Reactor

Reaction calorimetry is a very useful tool to monitor exothermic polymerization reactions as it is based on the estimation of the heat generated by the reaction. The objective of this work is to analyze the performance of an unscented Kalman filter (UKF) for online monitoring of batch vinyl acetate emulsion polymerization reactions. Reactions are performed in isoperibolic and isothermal conditions. The UKF is compared to an extended Kalman filter that has a very poor performance. The results show that the UKF is able to provide good estimates for the conversion, for the reactor and jacket temperatures, for the overall heat transfer coefficient between the reaction medium and the jacket, and for the heat loss from the jacket to the surroundings.

     

Accurate measurement of uranium isotope ratios in soil samples using thermal ionization mass spectrometry equipped with a warp energy filter

A chemical and mass-spectrometric procedure for uranium isotopic analysis using a thermal ionisation mass spectrometer equipped with a Wide Aperture Retardation Potential energy filter has been developed and applied to uranium isotopic measurements for various soil samples. Soil samples were digested using a microwave digestor. Uranium was isolated from soil samples by the chemical separation procedure based on the use of anion-exchange resin and UTEVA extraction chromatography column. The isotope ratios were measured for two certified reference materials by using a VG Sector 54-30 thermal ionisation mass spectrometer in dynamic mode with Faraday cup and Daly ion counting system. Replicates of standard reference materials showed excellent analytical agreement with established values supporting the reliability and accuracy of the method. Precision of the ²³⁵U/²³⁸U ratio was achieved by a correction factor of 0.22% amu as a function of ion-beam intensity with sample loads of around 250?ng of U. The resulting reproducibility for standards and soil samples was better than 0.2% at two standard deviations (SD). Uranium isotopic compositions have been determined in several reference soil samples such as Buffalo river sediment, NIST 2704, river sediment SRM 4350b and ocean sediment NIST-4357 and a Chernobyl soil sample. There was a significant deviation from the natural uranium in comparison with Chernobyl soil samples.     

Application of the Combustion Method in a Closed Flask to the Lead Determination in Atmospheric Aerosols

Abstract

The destruction of the filter for metal determination in atmospheric aerosols is an important step in the analysis. Nowadays the decomposition of this kind of sample has not been completely solved, so it is interesting to study new methods for filter sample attack. In the present work the application of the combustion method in a closed flask for mixed cellulose esters filter decomposition for lead determination is proposed. For this purpose optimum operating conditions as stopper flask design, sample size, flask volume, shaking time and volume and concentration of absorbing solution are established, and accuracy and precision of the proposed method using AAS for the measurements is given. The results obtained by the closed flask combustion are compared with those found by wet attack with HNO₃. The method proposed is rapid, has low reagent contamination and no loss of lead by volatilization or by amalgamation occurs. This method shows an accuracy and a precision in good agreement with the standard method.     

Application of ultra-performance liquid chromatography-tandem mass spectrometry for the determination of steroid oestrogens in wastewaters

An ultra-performance liquid chromatography method using a triple quadrupole mass spectrometer was developed and validated for the determination of steroid oestrogens in wastewater matrices. To date, analytical methods established in the literature for 17α-ethinylestradiol have been unable to achieve the proposed predicted no effect concentration of 0.1?ng?l^?1. The extensive sample pretreatment and analytical methodology proposed herein enable 17α-ethinylestradiol to be determined at very low background concentrations with a theoretical method detection limit of 0.06?ng?l^?1 which has been applied in real environmental matrices. During the validation process, a trickling filter wastewater treatment works was monitored to demonstrate the method's application. Oestrogen removal across the filters demonstrated good removals of natural free oestrogens (≥62.0%) with lower removals of the synthetic oestrogen 17α-ethinylestradiol (29.2%) from wastewaters at 10°C. The method's application illustrates its capability of detecting oestrogen concentrations in real wastewater samples comprising complex organics of comparatively high concentration. Furthermore, a complete process mass balance for 17α-ethinylestradiol is now attainable which has previously posed a challenge owing to the low environmental concentrations typically exhibited, but more significantly as a result of the lower sensitivity inherent in previously reported analytical methods.     

基于主动式时间反转镜的声呐目标强度测量研究

为提高目标强度测量过程中的抗噪声、混响以及浅海多途干扰性能,从军标文件中的目标强度测量方法以及主动式时间反转镜的基本原理出发,经过研究和推演,发现可将基于单阵元的主动式时间反转镜与相关器结合应用于目标强度测量过程,提出了一种新的目标强度测量方法。该方法利用了主动式时间反转镜的抗多途特性,使得测量具有抗多途的性能;利用噪声与信号的不相关特性,算法结合相关器起到了很好的抗随机噪声效果;混响中的体积混响是随机的,算法具有抗体积混响的性能。论文分别从理论仿真和水池实验验证了算法的有效性和正确性。