基于铰链式六面顶压机的二级6-8模超高压大腔体内置加热元件的设计与温度标定

 首次报道了一种新型的基于铰链式六面顶压机的二级6-8模大腔体静高压装置的内置加热元件的设计与温度标定。此加热组装结构简单,升温快,保温效果好,并有效地解决了国外基于两面顶压机构架下的二级6-8模内加热组装中热电偶在施加压力时易断的问题。以低成本的碳管为加热元件,采用直接和间接两种加热方式,用双铂铑（Pt6%Rh-Pt30%Rt）B型热电偶进行温度测量,并根据实验过程中加热功率与腔内实际温度的关系,对不同压力下腔体内的温度进行了标定。实验结果表明：此加热系统的油压达到40 MPa（腔体压力约10 GPa）时,温度可以达到1 700 ℃以上;在油压为30 MPa、样品室温度为1 000 ℃时,保温时间可达2 h,甚至更长;实验中获得样品的直径可达3 mm,高度可达7 mm,实现了在高温超高压条件下大样品的制备,满足了实验对产生高温超高压条件的需要。     

Stationary states of crystal growth in three dimensions

A new Markov process describing crystal growth in three dimensions is introduced. States of the process are configurations of the crystal surface, which has a terrace-edge-kink structure. The states are continuous along edges but discrete across edges, in accordance with the very different rates for the two types of captures of particles. Stationary distributions, describing steady crystal growth, are found in general. To our knowledge, these are the first examples of stationary distributions for layered crystal growth in three dimensions. The steady growth rate and other quantities are obtained explicitly for two interacting edges. For many interacting edges, growth behavior is determined (a) in various asymptotic regimes including thermodynamic limits, (b) via simulations, and (c) using series (cluster) expansions in the slope of the surface, the first three coefficients being computed. The theoretical growth rates show a marked dependence on surface dimensions. This may contribute to the size dependence and dispersion in the observed growth rate of small crystals.     

Poly(amidoamine)s: Past,present, and perspectives

Poly(amidoamine)s (PAAs) are a family of synthetic polymers obtained by stepwise polyaddition of prim‐ or sec‐amines to bisacrylamides. Nearly all conceivable bisacrylamides and prim‐ or sec‐amines can be employed as monomers endowing PAAs of a structural versatility nearly unique among stepwise polyaddition polymers. PAAs are degradable in aqueous media, including physiological fluids. Many of them are remarkably biocompatible notwithstanding their cationic character. PAAs are per se highly functional polymers and, in addition, can be further functionalized giving rise to an endless variety of polymeric structures meeting the requisites for applications in such apparently disparate fields as inorganic water pollutants scavengers, sensors, drug and protein intracellular carriers, transfection promoters, peptidomimetic antiviral and antimalarial agents. In this review, the unique chemistry of PAAs is discussed and a vast library of PAA structures and PAA applications from the beginning to the present days reported. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2319–2353     

Book reviews

This work is a thorough investigation on the major operating parameters of the programmable temperature vaporisation (PTV) inlet used for gas chromatographic injection, including injection mode and volume, inlet temperature, vent and purge flow rates. The results clearly demonstrate the advantage of large volume injection in enhancing the detection of polybrominated diphenyl ethers (PBDEs). Partial loss of injected PBDEs occurred during solvent venting and due to incomplete sample transfer. Such loss was minimised by lowering the initial inlet temperature and vent flow and elevating the final inlet temperature. The results show that 50 mL/min vent flow, as low as 0°C initial and higher than 300°C final inlet temperatures produced the relatively high responses. Two mass spectrometric parameters were also evaluated. Indoor dust, lake sediment and human placenta tissue samples were analysed to demonstrate reliability and sensitivity improvement of the PTV large volume injection.     

Access to nonisocyanate poly(thio)urethanes: A comparative study

This article describes the synthesis of new cyclic compounds able to react with amines to get nonisocyanate polyurethanes (NIPUs). The contribution of the most studied five‐membered cyclic carbonate was compared to five‐membered cyclic dithiocarbonate analogous and to a six‐membered cyclic carbonate. Difunctional reactive species were obtained by a simple substitution reaction or an efficient thiol–ene coupling reaction. The products, obtained with high yields, were characterized by 1H NMR, 13C NMR, and Fourier tansform infrared spectroscopy analysis. The dicyclocarbonates were then used to synthesize NIPUs by step growth polymerization with several diamines. These materials exhibited glass transition temperatures from 19 to ?29 °C, molar mass from 1800 to 20,400 g mol^?1, and a 20% mass loss temperature (T_d = 20%) between 249 and 296 °C. Such materials are interesting candidates for coating applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3284–3296     

An improved progressive preconditioning method for steady non‐cavitating and sheet‐cavitating flows

An improved progressive preconditioning method for analyzing steady inviscid and laminar flows around fully wetted and sheet‐cavitating hydrofoils is presented. The preconditioning matrix is adapted automatically from the pressure and/or velocity flow‐field by a power‐law relation. The cavitating calculations are based on a single fluid approach. In this approach, the liquid/vapour mixture is treated as a homogeneous fluid whose density is controlled by a barotropic state law. This physical model is integrated with a numerical resolution derived from the cell‐centered Jameson's finite volume algorithm. The stabilization is achieved via the second‐and fourth‐order artificial dissipation scheme. Explicit four‐step Runge–Kutta time integration is applied to achieve the steady‐state condition. Results presented in the paper focus on the pressure distribution on hydrofoils wall, velocity profiles, lift and drag forces, length of sheet cavitation, and effect of the power‐law preconditioning method on convergence speed. The results show satisfactory agreement with numerical and experimental works of others. The scheme has a progressive effect on the convergence speed. The results indicate that using the power‐law preconditioner improves the convergence rate, significantly. Copyright © 2010 John Wiley & Sons, Ltd.     

Effect of Li2CO3 addition on the structural,optical, ferroelectric,and electric-field-induced strain of lead-free BNKT-based ceramics

In this work, we reported the effect of Li₂CO₃ addition on the structural, optical, ferroelectric properties and electric-field-induced strain of Bi_0.5(Na,K)_0.5TiO₃ (BNKT) solid solution with CaZrO₃ ceramics. Both rhombohedral and tetragonal structures were distorted after adding Lithium (Li). The band gap values decreased from 2.91 to 2.69 eV for 5 mol% Li-addition. The maximum polarization and remanent polarization decreased from 49.66 μC/cm² to 27.11 μC/cm² and from 22.93 μC/cm² to 5.35 μC/cm² for un-doped and 5 mol% Li- addition BNKT ceramics, respectively. The maximum S_max/E_max value was 567 pm/V at 2 mol% Li₂CO₃ access. We expected this work will help to understand the role of A-site dopant in lead-free ferroelectric BNKT materials.     

Onset of Chiral Adenine Surface Growth

The structure and stability of adenine crystals and thin layers has been studied by using scanning tunneling microscopy, X‐ray diffraction, and density functional theory calculations. We have found that adenine crystals can be grown in two phases that are energetically quasi‐degenerate, the structure of which can be described as a pile‐up of 2D adenine planes. In each plane, the structure can be described as an aggregation of adenine dimers. Under certain conditions, kinetic effects can favor the growth of the less stable phase. These results have been used to understand the growth of adenine thin films on gold under ultra‐high vacuum conditions. We have found that the grown phase corresponds to the α‐phase, which is composed of stacked prochiral planes. In this way, the adenine nanocrystals exhibit a surface that is enantiopure. These results could open new insight into the applications of adenine in biological, medical, and enantioselective or pharmaceutical fields.