Ion Product of Pure Water Characterized by Physics-Based Water Model

Pure water has been characterized for nearly a century, by its dissociation into hydronium (H₃O)¹⁺ and hydroxide (HO)^1- ions. As a chemical equilibrium reaction, the equilibrium constant, known as the ion product or the product of the equilibrium concentration of the two ion species, has been extensively measured by chemists over the liquid water temper-ature and pressure range. The experimental data have been nonlinear least-squares fitted to chemical thermodynamic-based equilibrium equations, which have been accepted as the industrial standard for 35 years. In this study, a new and statistical-physics-based water ion product equation is presented, in which, the ions are the positively charged protons and the negatively charged proton-holes or prohols. Nonlinear least squares fits of our equation to the experimental data in the 0-100 ℃ pure liquid water range, give a factor of two better precision than the 35-year industrial standard.     

三次Gauss和及二项指数和的混合均值

我们用三角和的性质研究一类三次Gauss和与两项指数和混合均值的计算问题,并给出一个精确的计算公式.     

A cost‐effective curvature calculation approach for interfacial flows on unstructured meshes

We present a simple and cost‐effective curvature calculation approach for simulations of interfacial flows on structured and unstructured grids. The interface is defined using volume fractions, and the interface curvature is obtained as a function of the gradients of volume fractions. The gradient computation is based on a recently proposed gradient recovery method that mimicks the least squares approach without the need to solve a system of equations and is quite easy to implement on arbitrary polygonal meshes. The resulting interface curvature is used in a continuum surface force formulation within the framework of a well‐balanced finite‐volume algorithm to simulate multiphase flows dominated by surface tension. We show that the proposed curvature calculation is at least as accurate as some of the existing approaches on unstructured meshes while being straightforward to implement on any mesh topology. Numerical investigations also show that spurious currents in stationary problems that are dependent on the curvature calculation methodology are also acceptably low using the proposed approach. Studies on capillary waves and rising bubbles in viscous flows lend credence to the ability of the proposed method as an inexpensive, robust, and reasonably accurate approach for curvature calculation and numerical simulation of multiphase flows.     

一种基于Gauss von Mises分布模型的非线性量测更新方法

基于状态空间模型的许多传统滤波算法都基于Rn空间中的高斯分布模型,但当状态向量中包含角变量或方向变量时,难以达到理想的效果。针对J.T.Horwood等提出的nS?R流形上的Gauss Von Mises(GVM)多变量概率密度分布,扩展了狄拉克混合逼近方法,给出了联合分布的GVM逼近方法,推导了后验分布的GVM参数计算公式,设计了量测更新状态估计算法。将J.T.Horwood等的时间更新算法与所提出的量测更新算法相结合,可实现基于GVM分布的递推贝叶斯滤波器(GVMF)。仿真结果表明,当状态向量符合GVM概率分布模型时,GVMF对角变量的估计明显优于传统的扩展卡尔曼滤波器。     

The impact of chirally odd condensates on the rho meson

Based on QCD sum rules we explore the consequences of a scenario for the ρ meson, where the chiral symmetry breaking condensates are set to zero whereas the chirally symmetric condensates remain at their vacuum values. This clean-cut scenario causes a lowering of the ρ spectral moment by about 120 MeV. The complementarity of mass shift and broadening is discussed. A simple parametrization of the ρ spectral function leads to a width of about 280 MeV if no shift of the peak position is assumed.     

An arsenate with the α‐CrPO4 structure type,NaCa1–xNi3–2xAl2x(AsO4)3 (x = 0.23): crystal structure,charge‐distribution and bond‐valence‐sum analyses

Since the discovery of electrochemically active LiFePO₄, materials with tunnel and layered structures built up of transition metals and polyanions have become the subject of much research. A new quaternary arsenate, sodium calcium trinickel aluminium triarsenate, NaCa_1–x Ni_3–2x Al_2x (AsO₄)₃ (x = 0.23), was synthesized using the flux method in air at 1023 K and its crystal structure was determined from single‐crystal X‐ray diffraction (XRD) data. This material was also characterized by qualitative energy‐dispersive X‐ray spectroscopy (EDS) analysis and IR spectroscopy. The crystal structure belongs to the α‐CrPO₄ type with the space group Imma . The structure is described as a three‐dimensional framework built up of corner‐edge‐sharing NiO₆, (Ni,Al)O₆ and AsO₄ polyhedra, with channels running along the [100] and [010] directions, in which the sodium and calcium cations are located. The proposed structural model has been validated by bond‐valence‐sum (BVS) and charge‐distribution (CHARDI) tools. The sodium ionic conduction pathways in the anionic framework were investigated by means of the bond‐valence site energy (BVSE) model, which predicted that the studied material will probably be a very poor Na⁺ ion conductor (bond‐valence activation energy ∼7 eV).     

N,N-Dimethyl formamide facilitated formation of hexagonal boron nitride from boric acid

In this paper, we report on a promoting novel process for the formation of h-BN plates by using N,N-dimethyl formamide-treated boric acid (DMF-BA). Using this B source, the formation of h-BN can be indeed improved greatly compared to using pure boric acid (BA). This method effectively reduces the content of boric acid and amorphous boric oxide, enhancing the transformation rate of h-BN. For preparation of pure h-BN, it can obviously lower the resultant temperature without further purification process. Via graphitization index (G.I.) calculation and thermostability analysis, the pure h-BN plates obtained from the DMF-BA would be a promising candidate for raw material of c-BN and low-temperature applications in the air.     

Design of a reaction field using a linear‐combination‐based isotropic periodic sum method

In our previous study (Takahashi et al., J. Chem. Theory Comput. 2012, 8, 4503), we developed the linear‐combination‐based isotropic periodic sum (LIPS) method. The LIPS method is based on the extended isotropic periodic sum theory that produces a ubiquitous interaction potential function to estimate homogeneous and heterogeneous systems. The LIPS theory also provides the procedure to design a periodic reaction field. To demonstrate this, in the present work, a novel reaction field of the LIPS method was developed. The novel reaction field was labeled LIPS‐SW, because it provides an interaction potential function with a shape that resembles that of the switch function method. To evaluate the ability of the LIPS‐SW method to describe in homogeneous and heterogeneous systems, we carried out molecular dynamics (MD) simulations of bulk water and water–vapor interfacial systems using the LIPS‐SW method. The results of these simulations show that the LIPS‐SW method gives higher accuracy than the conventional interaction potential function of the LIPS method. The accuracy of simulating water–vapor interfacial systems was greatly improved, while that of bulk water systems was maintained using the LIPS‐SW method. We conclude that the LIPS‐SW method shows great potential for high‐accuracy, high‐performance computing to allow large scale MD simulations. © 2014 Wiley Periodicals, Inc.     

The Fourier space restricted Hartree-Fock method for the electronic structure calculation of linear poly(tetrafluoroethylene)

Building on the pioneering work of Jean-Marie André and working in the laboratory he founded, the authors have developed a code called FT-1D to make Hartree-Fock electronic structure computations for stereoregular polymers using Ewald-type convergence acceleration methods. That code also takes full advantage of all line-group symmetries to calculate only the minimal set of two-electron integrals and to optimize the computation of the Fock matrix. The present communication reports a benchmark study of the FT-1D code using polytetrafluoroethylene(PTFE) as a test case. Our results not only confirm the algorithmic correctness of the code through agreement with other studies where they are applicable, but also show that the use of convergence acceleration enables accurate results to be obtained in situations where other widely-used codes(e.g., PLH and Crystal) fail. It is also found that full attention to the line-group symmetry of the PTFE polymer leads to an increase of between one and two orders of magnitude in the speed of computation. The new code can therefore be viewed as extending the range of electronic-structure computations for stereoregular polymers beyond the present scope of the successful and valuable code Crystal.