On the inflation and deflation dynamics of liquid-filled,hyperelastic balloons

We derive a reduced-order model describing the inflation and deflation dynamics of a liquid-filled hyperelastic balloon, focusing on inviscid laminar flow and the extensional motion of the balloon. We initially study the flow and pressure fields for dictated motion of the solid, which throughout deflation are obtained by solving the potential problem. However, during inflation, flow separation creates a jet within the balloon, requiring a different approach. The analyses of both flow regimes lead to a simple piecewise model, describing the fluidic pressure during inflation and deflation, which is verified by finite element computations. We then use a variational approach to derive the equation describing the interaction between the extensional mode of the balloon and the entrapped fluid, yielding a nonlinear hybrid oscillator equation. Analytical and graphical investigations of the suggested model are presented, shedding light on its static and dynamic behaviour under different operating conditions. Our simplified model and its underlying assumptions are verified utilizing a fully coupled finite element scheme, showing excellent agreement.     

Rotational and rovibrational transitions in the a 1Δ2 and b 1Σ+0+ states of sulfur monoxide radical

ABSTRACT

Sulfur monoxide radical has widely been detected in outer space using ground-state spectroscopy. The a ¹Δ₂ and b ¹Σ⁺₀₊ states of this radical have low excitation energies, and they possibly exist in outer space. In this work, the potential energy curves and dipole moment functions of the two states were evaluated using the complete active space self- consistent field method, followed by the valence internally contracted multireference configuration interaction approach. The transition line positions, oscillator strengths, band transition dipole matrix elements, Einstein A coefficients, and Franck–Condon factors of all transitions were calculated for lower vibrational levels at rotational angular momentum quantum number J up to 150. The transition line positions calculated in this study are in good agreement with the experimental results. The rovibrational transition became noticeably weak at Δυ > 5. Comparing the results of a ¹Δ₂ and b ¹Σ⁺₀₊ states reported in this paper with the previous values, we conclude that these results are the most accurate and complete to date.     

OH+C2H3F的反应机理及产物支化比反应的理论研究

本文对HOC₂H₃F可能解离通道的势能面进行从头算CCSD(T)/CBS//B3LYP/6-311G(d,p)计算,同时对速率常数进行Rice-Ramsperger-Kassel-Marcus计算. 生成主要产物CH₂CHO+HF最有利的反应途径是OHC₂H₃F→i2→TS14→i6→TS9→i3→TS3→CH₂CHO+HF,其中速率决定步骤是HF通过TS11从CO桥接位置解离,能量比反应物高3.8 kcal/mol. 借助中间态TS14,F原子从C_α迁移到C_β位置生成CH₂O+CH₂F,然后通过中间态TS16,H从O迁移到C_α位置;通过中间态TS5,C-C键断裂生成产物,其能量比反应物低1.8 kcal/mol,比TS11低4.0 kcal/mol.     

Monte Carlo NPT系综法模拟考察几种水模型

应用NPT系综法模拟考察了五种水的势能模型 .模拟中采用周期边界条件、Metropolis抽样方法 ,并用Ewald方法对水分子间电荷作用进行长程校正 .模拟计算了内能 ,密度 ,压力及恒压热容等性质 .同时 ,还对这五种模型模拟得到的径向分布函数作了分析 .结果与文献及实验测定相比符合较好     

二氧化钚分子的多体展式势能函数

从导出基态PuO2分子的电子状态X5Σ g正确地判断其离解极限出发,采用MP2方法,应用相对论有效原子实模型(RECP)优化出PuO2(X5Σ g)分子稳定构型为线性OPuO(D∞h),其平衡核间距Re=0.18004nm.同时也计算出振动频率,并优化出存在亚稳态的Pu-O-O(C∞v)构型.使用多体项展式理论方法,导出了基态PuO2分子的分析势能函数.该势能表面准确地再现了O-Pu-O(D∞h)平衡结构和亚稳态的Pu-O-O(C∞v)构型.然后根据势能函数等值图讨论了O(3Pg) PuO反应的势能面静态特征.     

轨道对称性匹配:MXene基体上的单原子催化以实现优异的氮还原反应

氨作为一种可被植物直接吸收用以合成其他有机物的重要成分,在化学化工及含氮化合物的生产当中起着至关重要的作用.传统工业生产氨气采用Haber-Bosch工艺,将空气中丰富的氮气转化为氨气,但该工艺需要较高的压强和温度来促进氮气分解,因此会消耗大量能源.近年来,电催化反应发展迅速.在电催化工艺中,通过控制操作电位及电解质便可提高生产效率,降低能源消耗.基于这种策略,各种针对能源环境的催化研究应运而生,如二氧化碳还原、水分解反应等.其中,对于氮还原的催化研究尤其是电催化设计领域研究相对较少.研究发现,在电催化剂中,异构掺杂及原子尺度的调控可以极大地影响催化剂的催化活性.其中,单原子催化(SAC)因其在催化活性和催化选择性上的优势受到广泛关注.MXene是一种二维过渡金属碳化物或氮化物,其优异的化学性能和稳定的表面构型可以对单原子起到良好的锚定与支撑作用,是一种更具潜力的单原子催化基体.本文基于上述思想,利用密度泛函第一性原理等模拟软件,设计并研究了以MXene为基体的28种过渡金属单原子催化体系,计算并分析了各SAC@MXene体系对氮还原反应的催化效果,从限制电势、催化路径、反应机制等方面探索了其催化性能.并对体系进行了态密度、晶体轨道哈密顿量、差分电荷密度等电子结构分析,找到了适用于MXene体系的单原子催化设计原则.通过对限制电势的计算表明,Ni@MXene和Co@MXene体系具有很低的限制电势(-0.13和-0.17 V),说明这些体系在较低的启动电压下即可发生氮还原反应.研究发现了一种新型适用于SAC@MXene氮催化体系的酶促-远端反应机制.电子结构分析得到SAC原子与MXene基体的Ti原子在催化过程中存在一种协同作用.态密度及晶体轨道哈密顿量也显示出SAC原子与MXene基体Ti之间的一种轨道对称性匹配关系,揭示了这种协同作用对催化反应的积极作用.计算的氢析出反应(HER)结果也显示,在相同化学环境下,SAC@MXene体系氮还原反应相对于氢析出反应更易发生.     

氧化还原树脂的合成及其氧化还原性能

本文主要叙述了以国产717强碱性阴离子交换树脂为基体,采用甲醛与对苯二酚、邻苯二酚、连苯三酚和2,7-萘二酚等聚合生成氧化还原树脂,它们的氧化还原容量分别为5.3,5.4和5.2meq/g-干树脂.文中还介绍了本类树脂的氧化还原电位测定方法,并据此研究和测定了对苯二酚、邻苯二酚和连苯三酚型树脂的氧化还原电位,这些电位的测定结果与其氧化还原实验事实相符.也研究了多种氧化剂和还原剂与自制树脂的交换性能,讨论了这些树脂容量与交换性能的关系.应用所合成的新树脂进行了从硝酸银废液中回收银和对硫化氢试行氧化脱硫处理试验,效果良好.     

炭糊电极电位法测定痕量银

炭糊电位广泛应用于伏安法的测定,特别是修饰的炭糊电极,对于提高灵敏度和选择性具有极大的潜力,我们首次应用炭糊电极作为银离子的电位传感器,发现其具有制作方便、灵敏度高以及采用适当的掩蔽措施可得到较好的选择性等优点。 1 实验部分 1.1 仪器和试剂 pHS-10A数字酸度/离子计(萧山市科学仪器厂),pHS-2型酸度计(上海第二分析仪器厂).314 S~(2-)离子选择电极(江苏电分析仪器厂)。     

叠氮化氰的光解离机理

采用多参考态方法,在MRCI+Q//CAS(10,9)/6-311+G(2df)水平上对叠氮化氰(N3CN)的光解离机理进行理论研究.优化得到基态(S0)和低激发态(S1、S2、T1)势能面上的极小点、过渡态、内转换交叉点(IC-S1/S0)和隙间窜跃交叉点(ISC-S1/T1)的结构和能量,构建反应势能面.在MRCI+Q//CAS(10,9)水平上计算N3CN的垂直激发能,并和实验值进行对比.结果表明,在S0、S1、S2和T1态势能面上,N—N键断裂生成N2+NCN是主要解离途径,而C—N键断裂通道是次要通道.实验观测到220 nm处的吸收峰对应分子由S0态到S1态的激发,对应主要光解离产物为NCN[a1△g];而在275 nm处的吸收峰则对应分子被激发到T1态,然后直接生成基态产物NCN[X3Σg-].我们的理论结果与实验测量符合得很好.     

First-Principle Calculations of the Adsorption, Dissociation and Diffusion of Hydrogen on the Mg(0001) Surface

First-principle pseudopotential plane wave calculations and the Nudged Elastic Band method based on density functional theory (DFT) have been used in this article to study the dissociation of molecular hydrogen on a Mg(0001) surface and the subsequent diffusion of atomic hydrogen into the magnesium substrate. First, the dissociation pathway of H2 and the relative barrier were investigated. It was shown that physical adsorption rather than chemisorption of molecular hydrogen was observed in the calculation of the dissociation process of molecular hydrogen. Also, the diffusion process of atomic hydrogen on Mg(0001) was presented. The surface effect, which affected the diffusion of hydrogen obviously, was observed. Finally, comparing the values of the activation energies for the steps of dissociation, diffusion, and desorption, our calculation further showed that the dissociation of H2 and the desorption of hydride were the rate-limiting steps.