FLUTTER INSTABILITY OF SUPPORTED PIPES CONVEYING FLUID SUBJECTED TO DISTRIBUTED FOLLOWER FORCES

In the past decades,it has been reported that divergence is the expected form of instability for fluid-conveying pipes with both ends supported.In this paper,the form of instability of supported pipes ...     

Schiffer’s Problem and an Isoperimetric Inequality for the First Buckling Eigenvalue of Domains on $$\mathbb{S}^{2}$$

We consider the overdetermined eigenvalue problem on a sufficiently regular connected open domain Ω on the 2-sphere :

撑杆式预应力钢压杆屈曲形态函数研究

基于撑杆式预应力钢压杆正对称和反对称两个基本屈曲模态, 给出了相应的 屈曲形态函数, 通过3个典型算例并变化关键参数着重研究了模拟曲线项数, 同时 给出了不对称屈曲的形态函数. 研究表明, 取形态函 数模拟项数为预应力钢压杆节间数, 可以很好满足工程精度.     

不同失效模式下轴压管状结构的吸能特性比较

圆管、方管等管状结构受轴向的压缩作用,是工程上常见的一种结构受力形式.由于几何尺寸、边界条件和材料特性的不同,管状结构可以发生5种不同的失效模式：渐进屈曲、整体失稳、翻转、膨胀和劈裂.本文综述了近年来管状结构在轴压作用下不同失效模式的理论建模、实验测试和数值仿真研究结果,并对5种失效模式的力学响应、能量吸收特性进行了对比与分析.     

On the nonlinear dynamic buckling mechanism of autonomous dissipative/nondissipative discrete structural systems

Summary Nonlinear dynamic buckling of nonlinearly elastic dissipative/nondissipative multi-mass systems, mainly under step load of infinite duration, is studied in detail. These systems, under the same loading applied statically, experience a limit point instability. The analysis can be readily extended to the case of dynamic buckling under impact loading. Energy, topological and geometrical aspects for the total potential energyV, which is constrained to lie in a region of phase-space whereV0, allow conclusions to be drawn directly regarding dynamic buckling. Criteria leading to very good, approximate and lower/upper bound dynamic buckling estimates are readily established without solving the highly nonlinear set of equations of motion. The theory is illustrated with several analyses of a two-degree-of-freedom model.     

Pseudo-beam method for compressive buckling characteristics analysis of space inflatable load-carrying structures

This paper extends Le van＇s work to the case of nonlinear problem and the complicated configuration. The wrinkling stress distribution and the pressure effects are also included in our analysis. Pseudo-beam method is presented based on the inflatable beam theory to model the inflatable structures as a set of inflatable beam elements with a prestressed state. In this method, the discretized nonlinear equations are given based upon the virtual work principle with a 3-node Timoshenko＇s beam model. Finite element simulation is performed by using a 3-node BEAM189 element incorporating ANSYS nonlinear program. The pressure effect is equivalent included in our method by modifying beam element cross-section parameters related to pressure. A benchmark example, the bending case of an inflatable cantilever beam, is performed to verify the accuracy of our proposed method. The comparisons reveal that the numerical results obtained with our method are close to open published analytical and membrane finite element results. The method is then used to evaluate the whole buckling and the loadcarrying characteristics of an inflatable support frame subjected to a compression force. The wrinkling stress and region characteristics are also shown in the end. This method gives better convergence characteristics, and requires much less computation time. It is very effective to deal with the whole load-carrying ability analytical problems for large scale inflatable structures with complex configuration.     

Variational Derivative for Buckling Loads of Beams and Frames

The finite-difference method is a numerical technique for obtaining approximate solutions to differential equations. The main objective of the present study is to give a new aspect to the finite-difference method by using a variational derivative. By applying this formulation, accurate values of the buckling loads of beams and frames with various end supports are obtained. The performance of this formulation is verified by comparison with numerical examples in the literature __________ Published in Prikladnaya Mekhanika, Vol. 41, No. 7, pp. 139–144, July 2005.     

Experiments on snap buckling, hysteresis and loop formation in twisted rods

We give the results of large deflection experiments involving the bending and twisting of 1 mm diameter nickel-titanium alloy rods, up to 2 m in length. These results are compared to calculations based on the Cosserat theory of rods. We present details of this theory, formulated as a boundary value problem. The mathematical boundary conditions model the experimental setup. The rods are clamped in aligned chucks and the experiments are carried out under rigid loading conditions. An experiment proceeds by either twisting the ends of the rod by a certain amount and then adjusting the slack, or fixing the slack and varying the amount of twist. In this way, commonly encountered phenomena are investigated, such as snap buckling, the formation of loops, and buckling into and out of planar configurations. The effect of gravity is discussed.     

Mechanical properties of single-walled carbon nanotube bundles as bulk materials

Single-walled carbon nanotubes (SWNTs) in crystalline bundles may exhibit a transition in which the cross-sections of tubes turn from perfectly circular to hexagonal, depending upon the tube diameter and externally applied pressure, and this structural instability leads to an abrupt change in the bulk elastic properties of SWNT bundles. This paper presents a hybrid atom/continuum model to study the bulk elastic properties of SWNT bundles, and the predicted characteristics of this structural instability agree well with the experimental observations available in the literature. Linearized bulk elastic properties of SWNT bundles with respect to a stable configuration are transversely isotropic and hence can be characterized by five independent elastic moduli. A complete set of these five moduli is predicted for the first time. It is found that the deformability of tube cross-sections play a dominant role in characterizing the transverse moduli.     

刚性块轴向撞击杆的弹塑性动力屈曲

用特征线法分析了刚性块轴向撞击弹塑性直杆时应力波传播的全过程,得到了杆冲击端与固定端应力的变化规律及刚性块与杆首次分离的时间.基于能量原理,考虑了弹塑性应力波的传播与反射,建立了弹塑性杆在刚性块轴向撞击下的横向扰动方程,给出了问题的级数解,由解的稳定性得到了发生屈曲时的临界条件;通过数值计算和分析,给出了临界速度与冲击质量、线性强化模量及临界时间间的关系.