正交各向异性压磁电弹性矩形板的稳定问题

从压磁电弹性力学的三维平衡方程和本构关系出发,推导得到了正交各向异性压磁电弹性矩形板稳定问题的状态方程。求解状态方程并结合边界条件得到了稳定问题的屈曲方程。给出了临界应力的算例。     

A decoupled modal analysis for nonlinear dynamics of an orthotropic thin laminate in a simply supported boundary condition subject to thermal mechanical loading

In this paper, we analyze the nonlinear dynamic response of an orthotropic laminate in a simply supported boundary condition subject to thermal and mechanical loading. The equation of motion for the laminate’s deflection is obtained in a decoupled Duffing equation by means of a Galerkin-type method without Berger’s approximations. The Duffing equation incorporates an arbitrary thermal field, with both the in-plane and transverse temperature variations in a steady-state and a transient state. The formulation indicates that the transverse temperature variation produces an additional pressure load, while the in-plane temperature variation affects the system frequency. The equation allows for characterization of the laminate behaviors in nonlinear thermal buckling, thermal vibration and thermal mechanical response.     

ANALYSIS ON THE MAGNETO-ELASTIC-PLASTIC BUCKLING/SNAPPING OF CANTILEVER RECTANGULAR FERROMAGNETIC PLATES

An analysis of buckling/snapping and bending behaviors of magneto-elastic-plastic interaction and coupling for cantilever rectangular soft ferromagnetic plates is presented.Based on the expression of magnetic force from the variational principle of ferromagnetic plates,the buckling and bending theory of thin plates,the Mises yield criterion and the increment theory for plastic deformation,we establish a numerical code to quantitatively simulate the behaviors of the nonlinearly multi-fields coupling problems by the finite element method.Along with the phenom- ena of buckling/snapping and bending,or the characteristic curve of deflection versus magnitude of applied magnetic fields being numerically displayed,the critical loads of buckling/snapping, and the influences of plastic deformation and the width of plate on these critical loads,the plastic regions expanding with the magnitude of applied magnetic field,as well as the evolvement of deflection configuration of the plate are numerically obtained in a case study.     

弹性圆柱壳冲击扭转屈曲的突变模型

本文将突变理论用于处理冲击载荷下弹性结构的屈曲问题,文中建立了结构冲击屈曲的突变准则,认为临界阶跃载荷位于所提出突变系统的分叉集之中,并由此对两端固支的弹性圆柱壳扭转屈曲进行了分析,给出了不同初缺陷时的临界阶跃扭矩计算公式,通过对临界静态扭矩的计算,表明临界阶跃扭矩小于临界静态扭矩.     

不同边界条件正交各向异性中厚板的振动与稳定分析

本文采用高阶剪切变形理论对正交各向异性中厚矩形板进行振动与稳定分析,数值计算采用样条有限点法,得出了六种不同边界条件矩形板的自振频率和屈曲载荷,并与相应的经典板理论的结果进行比较.结果说明横向剪切变形对复合材料层合板的影响与板的各向异性程度、板的宽厚比(b/h)、层合板的层数和板的支承条件有关,它随着层合板各向异性程度的增加而增加,随着层合板宽厚比的增加而逐渐消失.     

两参数轴向冲击载荷作用下圆柱壳弹塑性动力屈曲

研究圆柱壳在两参数轴向冲击载荷下的弹塑性动力屈曲问题，基本控制方程由弹塑性连续介质中关于加速度的最小原理获得，本构关系采用增量理论。研究表明：屈曲过程可划分为两相，两相之间由临界时间ｔ表征，并分别讨论了应力波对屈曲的影响，压缩波与弯曲波的相互作用及几何尺寸，材料参数，初始缺陷，载荷峰值及持续时间等诸多因素与动力屈曲的关系。     

圆柱壳轴向流固冲击屈曲与塑性失效的实验研究

通过对三种不同径厚比圆柱壳进行的流固冲击实验，分析了它们在流固冲击载荷下的动力响应特点，并与相应的高速撞击与静力屈曲实验作了简单的比较，分析了它们之间的异同点。同时文中对极值冲击倒塌特性进行了详细分析     

Parsing disease‐relevant protein modifications from epiphenomena: perspective on the structural basis of SOD1‐mediated ALS

Conformational change and modification of proteins are involved in many cellular functions. However, they can also have adverse effects that are implicated in numerous diseases. How structural change promotes disease is generally not well‐understood. This perspective illustrates how mass spectrometry (MS), followed by toxicological and epidemiological validation, can discover disease‐relevant structural changes and therapeutic strategies. We (with our collaborators) set out to characterize the structural and toxic consequences of disease‐associated mutations and post‐translational modifications (PTMs) of the cytosolic antioxidant protein Cu/Zn‐superoxide dismutase (SOD1). Previous genetic studies discovered >180 different mutations in the SOD1 gene that caused familial (inherited) amyotrophic lateral sclerosis (fALS). Using hydrogen–deuterium exchange with mass spectrometry, we determined that diverse disease‐associated SOD1 mutations cause a common structural defect – perturbation of the SOD1 electrostatic loop. X‐ray crystallographic studies had demonstrated that this leads to protein aggregation through a specific interaction between the electrostatic loop and an exposed beta‐barrel edge strand. Using epidemiology methods, we then determined that decreased SOD1 stability and increased protein aggregation are powerful risk factors for fALS progression, with a combined hazard ratio > 300 (for comparison, a lifetime of smoking is associated with a hazard ratio of ~15 for lung cancer). The resulting structural model of fALS etiology supported the hypothesis that some sporadic ALS (sALS, ~80% of ALS is not associated with a gene defect) could be caused by post‐translational protein modification of wild‐type SOD1. We developed immunocapture antibodies and high sensitivity top‐down MS methods and characterized PTMs of wild‐type SOD1 using human tissue samples. Using global hydrogen–deuterium exchange, X‐ray crystallography and neurotoxicology, we then characterized toxic and protective subsets of SOD1 PTMs. To cap this perspective, we present proof‐of‐concept that post‐translational modification can cause disease. We show that numerous mutations (N➔D; Q➔E), which result in the same chemical structure as the PTM deamidation, cause multiple diseases. Copyright © 2017 John Wiley & Sons, Ltd.     

工程结构静力分析和屈曲分析程序系统DDJTJQ及其应用

DDJTJQ是一个国内开发的组合结构静力分析和屈曲分析有限元程序系统,自1986年通过技术鉴定以来又有了许多发展。本文介绍该程序系统的功能和特点、求解能力以及在不同工程领域结构分析中的应用。     

盘绕式空间可展折叠无铰伸展臂的屈曲分析理论研究

首先介绍了无铰可展空间伸展臂(Hingeless Mast)构造特点、展开折叠机理和受力特点,然后根据弹性稳定理论和能量原理,分别推导出局部卷压屈曲和整体螺旋屈曲的临界压力表达式,并据此进行参数特性分析。本文分析理论对无铰空间伸展臂的设计具有重要指导意义。