BAHADUR ASYMPTOTIC EFFICIENCY IN A SEMIPARAMETRIC REGRESSION MODEL

ＢＡＨＡＤＵＲＡＳＹＭＰＴＯＴＩＣＥＦＦＩＣＩＥＮＣＹＩＮＡＳＥＭＩＰＡＲＡＭＥＴＲＩＣＲＥＧＲＥＳＳＩＯＮＭＯＤＥＬ￥ＬＩＡＮＧＨＵＡ；ＣＨＥＮＧＰＩＮＧＡｂｓｔｒａｃｔ：ＴｈｅａｕｔｈｏｒＳｇｉｖｅＭＬＥθ１ＭＬｏｆθ１ｉｎｔｈｅｍｏｄｅｌＹ＝θ...     

一类三参数混沌动力学系统模型及其在经济增长研究中的应用

从非线性自回归模型Xt+1=-αXtλ+1+βXt+γ出发,通过变量替换Xt=aYt,推出三参数混沌动力学系统模型Yt+1=kYt(1-Ytλ)+c;采用线性回归与非线性回归相结合的改进的混合法,对模型参数作了估计;实际研究表明,该模型可以用于对国内生产总值GDP增长的研究.     

Vehicle density and velocity estimation on highways for on-ramp metering control

A scheme for vehicle density and velocity estimation in a stretch of highway based on a modified cell transmission model [C. F. Daganzo, Transportation Research, Part B, 28B(4),269–287, 1994. Elsevier is presented. The scheme is intended for use with on-ramp metering control algorithms, providing local knowledge of densities and velocities that is helpful to improve on-ramp metering control performance. Estimation of density is obtained by nonlinear estimators, while velocity estimation is obtained by gradient algorithms. There is one density–velocity estimator for free traffic flow and other for congested traffic flow. Both estimator schemes work in parallel. The final estimation of density and velocity results from a convex combination of the predictions of the two estimators. This combination depends on occupancy or density measurements at the boundaries of the stretch and is produced by a fuzzy inference system. Stability and convergence of the density and velocity estimation scheme is proved by Lyapunov based techniques. Simulation results comparing measured and estimated traffic data are presented. They confirm good performance of the estimators. Research sponsored by grants UNAM PAPIIT IN110403 and CONACYT 47583.     

Semiparametric estimation of the long-range parameter

We study two estimators of the long-range parameter of a covariance stationary linear process. We show that one of the estimators achieve the optimal semiparametric rate of convergence, whereas the other has a rate of convergence as close as desired to the optimal rate. Moreover, we show that the estimators are asymptotically normal with a variance, which does not depend on any unknown parameter, smaller than others suggested in the literature. Finally, a small Monte Carlo study is included to illustrate the finite sample relative performance of our estimators compared to other suggested semiparametric estimators. More specifically, the Monte-Carlo experiment shows the superiority of the proposed estimators in terms of the Mean Squared Error. The first author research was funded by the Economic and Social Research Council (ESRC) reference number: R000238212. The second author research was funded by the Ministry of Education, Culture, Sports and Technology of Japan, reference number: 09CE2002 and B(2)10202202.     

Periodic and subharmonic solutions of a class of subquadratic second-order Hamiltonian systems

Some solvability conditions of periodic and subharmonic solutions are obtained for a class of subquadratic nonautonomous second-order Hamiltonian systems by the minimax methods in critical point theory.     

中国银行间拆借利率扩散模型的极大拟似然估计

本文用极大拟似然估计法估计了中国银行间市场七天拆借利率扩散模型的参数。并用自助法对众多不同的模型进行了广义拟似然比检验。结论表明:中国货币市场利率具有均值回复效应:利率敏感系数γ值为1.421265,对利率水平具有较高敏感性。     

H1弱拓扑中GBBM方程整体吸引子的存在性

文章讨论无界区域上GBBM方程的Cauchy问题,对方程的解进行了先验估计,并证明了在H1弱拓扑中整体吸引子的存在性.     

Clustering Effect on the Statistical Estimation Accuracy of Distribution Density

The paper is devoted to statistical nonparametric estimation of multivariate distribution density. The influence of data pre-clustering on the estimation accuracy of multimodal density is analyzed by means of the Monte Carlo method. It is shown that the soft clustering is more advantageous than the hard one. While a moderate increase in the number of clusters also increases the calculation time, it considerably reduces the estimation error.     

Dynamic Nonlinear Modelization of Operational Supply Chain Systems

Supply Chain Management (SCM) is an important activity in all producing facilities and in many organizations to enable vendors, manufacturers and suppliers to interact gainfully and plan optimally their flow of goods and services. To realize this, a dynamic modelling approach for characterizing supply chain activities is opportune, so as to plan efficiently the set of activities over a distributed network in a formal and scientific way. The dynamical system will result so complex that it is not generally possible to specify the functional forms and the parameters of interest, relating outputs to inputs, states and stochastic terms by experiential specification methods. Thus the algorithm that will presented is Data Driven, determining simultaneously the functional forms, the parameters and the optimal control policy from the data available for the supply chain. The aim of this paper is to present this methodology, by considering dynamical aspects of the system, the presence of nonlinear relationships and unbiased estimation procedures to quantify these relations, leading to a nonlinear and stochastic dynamical system representation of the SCM problem. Moreover, the convergence of the algorithm will be proved and the satisfaction of the required statistical conditions demonstrated. Thus SCM problems may be formulated as formal scientific procedures, with well defined algorithms and a precise calculation sequence to determine the best alternative to enact. A “Certainty equivalent principle” will be indicated to ensure that the effects of the inevitable uncertainties will not lead to indeterminate results, allowing the formulation of demonstrably asymptotically optimal management plans.     

Sequential nonlinear estimation with nonaugmented priors

How can the basic compatibility of theory and observations be investigated for nonlinear processes without requiring stochastic characterizations for residual error terms? The present paper proposes a flexible least-cost approach. For each possible estimatex for the sequence of process states, letc _D (x) andx _M(x) denote the costs incurred for deviations away from the prior dynamic specifications and prior measurement specifications, respectively. Define the cost-efficiency frontier to be the greatest lower bound for the set of all possible cost pairs [c _D (x),c _M(x)], conditional on the given observations. State sequence estimatesx that attain the cost-efficiency frontier indicate the possible ways that the actual process could have developed over time in a manner minimally incompatible with the prior dynamic and measurement specifications. An algorithm is developed for the exact sequential updating of the cost-efficient state sequence estimates as the duration of the process increases and additional observations are obtained.