Implementation and experimental study on fast object modeling based on multiple structured stripes

In this paper, a practical structured light-based system for fast object modeling and reconstruction is reported. The system consists of an off-the-shelf digital projector, a video camera and a turntable. The system calibration is implemented accurately and automatically by taking a single image of an illuminated calibration template. The multiple color light stripes emitted by the projector adopt only three colors and the color can be modified easily according to the surface texture of the object. This makes the system widely applicable in many situations, and the assumption about color neutrality, which is a limitation to other similar systems, can be largely relaxed. The registration and merging algorithm is greatly simplified by employing a turntable. The validity and high accuracy of the method are demonstrated by extensive real experiments.     

无零级衍射干扰的彩色数字全息研究

彩色数字全息研究中,用球面波为重建波及角谱衍射公式进行波前重建是一种有效的方法.然而,重建图像上通常伴有强烈的零级衍射干扰.本文通过理论分析,对波前重建过程作了重要改进.用改进后的方法进行彩色数字全息的实验研究表明,重建彩色图像的质量获得显著改善. 关键词： 彩色数字全息 波前重建 零级衍射干扰     

一种测量多相流流型的ECT图像重建算法

提出了一种新的电容层析成像图像重建算法-IMNSNOF算法.该算法在分析极小范数解的基础之上针对ECT逆问题的特点对其进行改进,并利用奇异值分解定理证明这种改进的数值稳定作用.在此基础上建立新的日标泛函,并在求解该泛函的过程中采用正则技巧对其进行改进确保数值解的稳定性.利用非闭合电极ECT传感器实测了多相流沿流向的流型...     

基于径向基神经网络预测的混沌时间序列嵌入维数估计方法

根据Takens定理,研究了混沌时间序列相空间重构嵌入维数的选取问题.提出了基于径向基函数神经网络预测模型性能的嵌入维数估计方法,即根据嵌入维数与混沌时间序列预测模型性能的变化关系来确定嵌入维数.通过对几种典型混沌动力学系统的数值验证,结果表明该方法能够确定出合适的相空间重构嵌入维数. 关键词： 混沌 相空间重构 嵌入维数 预测     

General symmetries in optimal control

In this paper we study general symmetries for optimal control problems making use of the geometric formulation proposed in [7]. This framework allows us to reduce the number of equations associated with optimal control problems with symmetry and compare the solutions of the original system with the solutions of the reduced one. The reconstruction of the optimal controls starting from the reduced problem is also explored.     

彩色全息图的计算机产生和数字再现

提出了一种基于色彩合成以及菲涅尔衍射原理,用计算机产生全息图并用数字方法再现彩色全息图的方法。该方法的第一步是将物体的彩色RGB图像分离为三基色强度图,再利用博奇编码的方法制成修正离轴参考光分色计算机全息图;第二步是分别对分色全息图在频域进行调制以实现用原参考光真实再现原始物光波。通过滤波消除零级衍射及共轭像的影响,获得了所需要的实像并提高了像质。提供的实验是选用一幅RGB图像作为原始物体,给出了用博奇编码法制成的全息图以及最后经色彩合成获得的再现像。结果表明,该方法能使各分色全息图的再现像准确重合,解决了在色彩合成时容易出现的色串扰问题。     

数字全息干涉术用于微波等离子体推进器羽流场的研究

利用数字全息干涉术研究了微波等离子体推进器羽流场的分布特征,由所记录的羽流场的数字全息图,经数值再现,得到了羽流场的相位分布,进而计算出等离子体羽流场的电子数密度.通过相位倍增法增加了羽流场的干涉条纹密度,从而能够更直观地反映出羽流场的折射率分布.结果表明,数字全息干涉术是研究微波等离子体推进器羽流场的一种有效方法.     

How I Do It: Miniplate Reconstruction of the Lateral Thyroid Lamina: One-Stage Restoration of Voice After Teflon Granuloma Resection

This case report describes a one-stage technique for long-term voice restoration and laryngeal reconstruction in the treatment of Teflon (Dupont, Wilmington, Delaware) granuloma. A patient who presented with severe dysphonia underwent resection of a Teflon granuloma via a lateral laryngotomy. A pedicled strap muscle flap was used to reconstruct the paraglottic space. The muscle flap was positioned through the lateral laryngotomy with direct endoscopic visualization of the endolarynx to ensure correct vertical positioning and medialization of the vocal fold. The muscle flap was secured in this position with suture fixation. The trapdoor piece of cartilage that was elevated to create the window in the lateral thyroid lamina was repositioned over the pedicled muscle flap and reinforced with a titanium miniplate, which was secured to the remaining thyroid cartilage. The patient had excellent voice results and has not required revision or augmentation. Reinforcement of the lateral thyroid lamina using titanium miniplate fixation helps to stabilize the muscle pedicle flap and the position of the vocal fold, in this case resulting in good long-term voice results after a single-stage reconstruction.     

Hydroxylation-induced modifications of the Al2O3/NiAl(0 0 1) surface at low water vapour pressure

STM, STS, LEED and XPS data for crystalline θ-Al₂O₃ and non-crystalline Al₂O₃ ultra-thin films grown on NiAl(0 0 1) at 1025 K and exposed to water vapour at low pressure (1 × 10⁻⁷-1 × 10⁻⁵ mbar) and room temperature are reported. Water dissociation is observed at low pressure. This reactivity is assigned to the presence of a high density of coordinatively unsaturated cationic sites at the surface of the oxide film. The hydroxyl/hydroxide groups cannot be directly identify by their XPS binding energy, which is interpreted as resulting from the high BE positions of the oxide anions (O_1s signal at 532.5-532.8 eV). However the XPS intensities give evidence of an uptake of oxygen accompanied by an increase of the surface coverage by Al³⁺ cations, and a decrease of the concentration in metallic Al at the alloy interface. A value of ∼2 for the oxygen to aluminium ions surface concentration ratio indicates the formation of an oxy-hydroxide (AlO_xOH_y with x + y ∼ 2) hydroxylation product. STM and LEED show the amorphisation and roughening of the oxide film. At P(H₂O) = 1 × 10⁻⁷ mbar, only the surface of the oxide film is modified, with formation of nodules of ∼2 nm lateral size covering homogeneously the surface. STS shows that essentially the valence band is modified with an increase of the density of states at the band edge. With increasing pressure, hydroxylation is amplified, leading to an increased coverage of the alloy by oxy-hydroxide products and to the formation of larger nodules (∼7 nm) of amorphous oxy-hydroxide. Roughening and loss of the nanostructure indicate a propagation of the reaction that modifies the bulk structure of the oxide film. Amorphisation can be reverted to crystallization by annealing under UHV at 1025 K when the surface of the oxide film has been modified, but not when the bulk structure has been modified.     

CuPc molecules adsorbed on Au(1 1 0)-(1 × 2): growth morphology and evolution of valence band states

We present the growth morphology, the long-range ordering, and the evolution of the valence band electronic states of ultrathin films of copper phthalocyanine (CuPc) deposited on the Au(1 1 0)-(1 × 2) reconstructed surface, as a function of the organic molecule coverage. The low energy electron diffraction patterns present a (5 × 3) reconstruction from the early adsorption stages. High-resolution UV photoelectron spectroscopy data show the disappearance of the Au surface states related to the (1 × 2) reconstruction, and the presence of new electronic features related to the molecule-substrate interaction and to the CuPc molecular states. The CuPc highest occupied molecular orbital gradually emerges in the valence band, while the interface electronic states are quenched, upon increasing the coverage.