Viscosity of liquid suspensions with fractal aggregates: Magnetic nanoparticles in petroleum colloidal structures

New physical model is presented resulting in a simple formula for the dependence of viscosity η of colloidal liquid solution on the shear rate G applicable to a wide variety of systems including complex natural liquids like petroleum. The principal point of the model is the fractal nature of colloid particle aggregates present in the liquid. Such aggregates are experimentally detected now in non-Newtonian liquids. The model is based on calculation of energy loss on colloidal particle aggregate of fractal structure localized in the flow of liquid with shear rate. We have performed the viscosity measurement experiments which confirmed successfully the developed physical model. Also, we demonstrate experimentally that petroleum colloidal particles and magnetic iron oxide nanoparticles can form composite fractal-like aggregates in natural petroleum materials. Our model can explain both the non-Newtonian properties of petroleum and sensitivity of petroleum viscosity to external magnetic fields.     

Evaluation of relative LC/MS response of metabolites to parent drug in LC/nanospray ionization mass spectrometry: potential implications in MIST assessment

There is an increasing demand for quantitative data on metabolite exposure triggered by regulatory guidances. This contribution describes the accuracy of nanoelectrospray ionization mass spectrometry response of drug compounds and their metabolites from biological matrices compared with radiometric quantification. This is a comprehensive investigation of a set of real-life pharmaceutical compounds in relevant matrices such as urine, bile, feces and plasma. The data suggest that nanoelectrospray mass spectrometry can be used for semi-quantitation of metabolites in the absence of reference standards. Therefore, this approach is suitable to screen out non-relevant metabolites early in development as long as an adequate analytical error margin is applied thus balancing risks and resources.     

Direct determination of arsenic in petroleum derivatives by graphite furnace atomic absorption spectrometry: A comparison between filter and platform atomizers

In the present work a direct method for the determination of arsenic in petroleum derivatives has been developed, comparing the performance of a commercial transversely heated platform atomizer (THPA) with that of a transversely heated filter atomizer (THFA). The THFA results in a reduction of background absorption and an improved sensitivity as has been reported earlier for this atomizer. The mixture of 0.1% (m/v) Pd + 0.03% (m/v) Mg + 0.05% (v/v) Triton X-100 was used as the chemical modifier for both atomizers. The samples (naphtha, gasoline and petroleum condensate) were stabilized in the form of a three-component solution (detergentless microemulsion) with the sample, propan-1-ol and 0.1% (v/v) HNO₃ in a ratio of 3.0:6.4:0.6. The characteristic mass of 13 pg found in the THFA was about a factor of two better than that of 28 pg obtained with the THPA; however, the limits of detection (LOD) and quantification (LOQ) were essentially the same for both atomizers (1.9 and 6.2 μg L⁻¹, respectively, for THPA, and 1.8 and 5.9 μg L⁻¹, respectively, for THFA) due to the increased noise observed with the THFA. A possible explanation for that is a partial blockage of the radiation from the hollow cathode lamp by the narrow inner diameter of this tube and the associated loss of radiation energy. Due to the lack of an appropriate certified reference material, recovery tests were carried out with inorganic and organic arsenic standards and the results were between 89% and 111%. The only advantage of the THFA found in this work was a reduction of the total analysis time by about 20% due to the ‘hot injection’ that could be realized with this furnace. The arsenic concentrations varied from < LOQ to 43.3 μg L⁻¹ in the samples analyzed in this work.     

Feasibility of high-resolution continuum source molecular absorption spectrometry in flame and furnace for sulphur determination in petroleum products

For the first time, high-resolution molecular absorption spectrometry with a high-intensity xenon lamp as radiation source has been applied for the determination of sulphur in crude oil and petroleum products. The samples were analysed as xylene solutions using vaporisation in acetylene-air flame or in an electrothermally heated graphite furnace. The sensitive rotational lines of the CS molecule, belonging to the ?ν = 0 vibrational sequence within the electronic transition X¹∑⁺ → A¹П, were applied. For graphite furnace molecular absorption spectrometry, the Pd + Mg organic modifier was selected. Strong interactions with Pd atoms enable easier decomposition of sulphur-containing compounds, likely through the temporal formation of Pd_xS_y molecules. At the 258.056 nm line, with the wavelength range covering central pixel ± 5 pixels and with application of interactive background correction, the detection limit was 14 ng in graphite furnace molecular absorption spectrometry and 18 mg kg⁻¹ in flame molecular absorption spectrometry. Meanwhile, application of 2-points background correction found a characteristic mass of 12 ng in graphite furnace molecular absorption spectrometry and a characteristic concentration of 104 mg kg⁻¹ in flame molecular absorption spectrometry.The range of application of the proposed methods turned out to be significantly limited by the properties of the sulphur compounds of interest. In the case of volatile sulphur compounds, which can be present in light petroleum products, severe difficulties were encountered. On the contrary, heavy oils and residues from distillation as well as crude oil could be analysed using both flame and graphite furnace vaporisation. The good accuracy of the proposed methods for these samples was confirmed by their mutual consistency and the results from analysis of reference samples (certified reference materials and home reference materials with sulphur content determined by X-ray fluorescence spectrometry).     

Supercritical fluid chromatography of petroleum products using flameless sulfur chemiluminescence detection

Supercritical fluid chromatography using flameless sulfur chemiluminescence detection has been investigated for the analysis of sulfur compounds in petroleum products. The chromatography and detection system was easy to implement and exhibited good precision, linearity, selectivity, and sensitivity. A minimum detectable limit of 0.3 pg sulfur/s was obtained, and response to sulfur in different sulfur species was nearly equimolar.     

Xylanolytic enzyme production by anAspergillus niger isolate

Production of xylanolytic enzymes by anAspergillus niger CCMI 850 isolate was investigated in batch cultures. The effect of the composition of a fermentation medium that did not include chemical inducers, on β-xylanase, β-xylosidase, α-l-arabinofuranosidase, and total cellulase activity was studied. With 4% xylan as the carbon source, about 65 U/mL of β-xylanase was obtained, whereas the total cellulase activity was undetectable, under the specified conditions. This β-xylanase activity represents the highest reported for a wild-type strain ofA. niger. The effect of pH and temperature on the activity of β-xylanase was studied. Partial characterization of the β-xylanase showed that with insoluble birchwood as substrate theK _m andV _max were 0.3 mM and 19 μmol/min, respectively. Aspects of using the crude β-xylanase preparation for applications in the pulp and paper industry were discussed.     

Internal standardization for the determination of cadmium,cobalt, chromium and manganese in saline produced water from petroleum industry by inductively coupled plasma optical emission spectrometry after cloud point extraction

In the present paper a procedure is proposed for the determination of traces of Cd, Co, Mn and Cr in petroleum industry produced water by inductively coupled plasma optical emission spectrometry. The procedure is based on cloud point extraction of these metals, as their dithizonate complexes, into the surfactant-rich phase of octylphenoxypolyethoxyethanol surfactant (Triton X-114). Extractions were carried out in solutions with salinities between 10‰ and 70‰. Since residual salinity in the surfactant-rich phase caused differences in its transport to the plasma, yttrium was used as an internal standard to correct for this effect. The simultaneous metal extraction procedure was optimized by response surface methodology using a Doehlert design and desirability function. Enhancement factors of 21, 21, 9 and 19, along with limits of quantification of 0.093, 0.20, 0.73 and 1.2 μg L^− 1, and precision expressed as relative standard deviation (n = 8, 20.0 μg L^− 1) of 5.8, 1.2, 1.7 and 5.7% were obtained for Cd, Co, Mn and Cr, respectively. The accuracy was evaluated by spike recovery tests on the high salinity water samples with salinity of 40 and 63‰.     

气相色谱-场电离飞行时间质谱测定中间馏分油中链烷烃的形态分布

利用气相色谱-场电离飞行时间质谱技术( GC-FI TOF MS)建立了中间馏分油中不同异构程度链烷烃的碳数分布表征方法。首先利用GC-FI TOF MS技术对不同异构程度的链烷烃进行分离、鉴别,然后建立了中间馏分油沸点范围内正构烷烃、异构烷烃在GC-FI TOF MS测定时的相对响应因子算法及不同异构程度链烷烃的碳数分布算法,最后考察此定量方法的精密度和准确度。结果表明,GC-FI TOF MS可以将同碳数链烷烃区分为异构程度不同的3部分：多取代基异构烷烃、单取代基异构烷烃和正构烷烃;可利用GC-FI TOF MS对异构程度不同的链烷烃进行定量分析,精密度较好,相对偏差小于15%。此方法无需进行样品预分离,可直接进样分析,缩短了分析时间,且首次提供了不同异构程度异构烷烃的碳数分布信息。     

Determination of hopane biomarkers in Arabian crude oils by gas chromatography-tandem mass spectrometry

Gas chromatography-mass spectrometry with the mass spectrometer operated in the tandem mode at a constant accelerating voltage was used to analyse for triterpanes in Arabian crude oils. Specific molecular parent-daughter ion pairs were selected for quantitative measurements owing to their metastable transitions in the first field-free region. More accurate relative distribution ratios of hydrocarbon biomarkers were determined by this sequential gating technique than by the conventional diagnostic daughter ion mass fragmentogram in common GC-MS. The data and spectra obtained from MS-MS operation may serve as unique “fingerprints” for these regional crudes     

Mass-spectrometric analysis of complex volatile and nonvolatile crude oil components: a challenge

Crude oil analysis has long been an inspiration for the development of analytical techniques. Especially mass spectrometry has flourished as a result of the challenge these extremely complex problems offer. Here an overview of different analytical methods is presented that shows different ways to analyze volatile and nonvolatile crude oil components. Focus has been placed on the use of mass spectrometry and especially the new developments that have been introduced using the emerging technique of Fourier transform ion cyclotron resonance mass spectrometry. These studies are examples of how far the development of analytical methods has come for the task of studying such complex problems.