基于模式搜索的光谱消光粒径分布反演算法的研究

发展快速有效的反演算法用于粒径分布的重建是颗粒测量领域重要的研究课题之一。在光谱消光法粒径测量中,提出将模式搜索算法用于独立模式下粒径分布的重建,同时引入Tikhonov平滑泛函构建算法的目标函数,为保证搜索过程的快速性和准确性,设计了关于初始点的优选策略。利用该算法测量国家标准颗粒体积平均直径的相对误差为3.14%,不超过国家标准物质局给出的±8%的范围,且粒径分布宽度合理,没有明显展宽和伪峰现象。与Phillips-Twomey方法和遗传算法的对比结果表明,在综合考虑反演精度和反演时间条件下,该算法具有明显优势,更适合于快速准确的现场测量,具有较好的应用前景。     

Effect of pit formation and surface roughness on size-dependent thermal conductivity of nanometer-thick semiconducting films

In this work, the thermal conductivity variation due to pit formation and surface roughness in nanometer-thick semiconducting films has been studied. It is shown that the thermal conductivity of thin films is reduced due to the presence of these effects in the films. This reduction in thermal conductivity is dependent on film thickness. The present analysis has been done on GaAs nanometer-thick films using the available experimental data.     

Concurrent formation of two different type precipitation-free zones during the initial stage of homogenization

Transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy were used to study the microstructure evolution of Al–Cu–Mg alloy during the initial stage of homogenization. It was found that two types of precipitation-free zones (PFZs) can form concurrently: one near grain boundaries and the other at the grain centres. Depth profile analyses of solute concentrations and dislocation-loop distributions strongly suggested that the formations of the two type of PFZs are different, due solely and exclusively to solute and vacancy depletion, respectively. A mechanism model was proposed to explain the concurrent formation of the two different type of PFZs during the initial stage of homogenization.     

Molecular dynamics simulation of the interaction between a mixed dislocation and a stacking fault tetrahedron

A high number-density of nanometer-sized stacking fault tetrahedra are commonly found during irradiation of low stacking fault energy metals. The stacking fault tetrahedra act as obstacles to dislocation motion leading to increased yield strength and decreased ductility. Thus, an improved understanding of the interaction between gliding dislocations and stacking fault tetrahedra are critical to reliably predict the mechanical properties of irradiated materials. Many studies have investigated the interaction of a screw or edge dislocation with a stacking fault tetrahedron (SFT). However, atomistic studies of a mixed dislocation interaction with an SFT are not available, even though mixed dislocations are the most common. In this paper, molecular dynamics simulation results of the interaction between a mixed dislocation and an SFT in face-centered cubic copper are presented. The interaction results in shearing, partial absorption, destabilization or simple bypass of the SFT, depending on the interaction geometry. However, the SFT was not completely annihilated, absorbed or collapsed during a single interaction with a mixed dislocation. These observations, combined with simulation results of edge or screw dislocations, suggest that defect-free channel formation in irradiated copper is not likely by a single dislocation sweeping or destruction process, but rather by a complex mix of multiple shearing, partial absorption and defect cluster transportation that ultimately reduces the size of stacking fault tetrahedra within a localized region.     

Pattern时延差编码四信道水声通信技术研究

本文所研究的是基于Pattern时延差编码（PDS）体制下的水声通信技术.PDS水声编码体制利用Pattern码片出现在码元窗的时延差值进行时延编码,通过码元分割,有效的降低了水声信道的多途干扰;通过频率分割划分四个通信信道,增加通信速率至1000bit/s.在接收端利用带通滤波器来实现通信信道分割,每个信道再应用拷贝相关器实现码元分割并估计出时延差值,完成译码.仿真实验表明,该系统适合于大量不同水声信道高可靠性工作,为水声通信网络化打下坚实基础.     

电子束蒸发在不同Ar气氛下外退火制备MgB2超导薄膜

制备高质量的MgB2薄膜是实现MgB2超导电子器件应用的前提和基础.我们用电子束蒸发B膜和Mg/B多层膜为前驱然后后退火的方法,分别在高温区(~900℃)和中温区(~750℃)成功获得了MgB2超导薄膜.改变退火的Ar气压条件,采用B膜前驱退火的样品Tc可达到38K以上,转变宽度0.3K.Mg/B多层膜的结果尽管Tc稍低(Tc~35K),但薄膜表面更加均匀,且避免了高温下Mg蒸汽污染的问题.对于两种前驱退火中观察到的完全不同的退火气压影响,我们认为是与其各自的超导成相过程相联系的,在此基础上我们对退火气压效应给出了自己的分析和解释,为今后进一步细致研究退火过程中的薄膜生长机制提供了参考.     

An eye behavior measuring device for VR system

This work presents an eye-tracking and pupil size-measuring device that interfaces with a computer for applications useful in psychometry, ophthalmology, physiology and virtual reality (VR) systems. This system utilizes a change-coupled device (CCD) camera, appropriate lenses, PC with frame grabber and a DSP unit with various types of VR equipment, i.e., HMD, simulator or LCD projection device. The digital signal processing unit is used to calculate the average brightness and contrast of the VR video image. A CCD camera with various attachments can be mounted on various VR systems to capture the human eye image for testing. An image capture card and a personal computer are used to analyze the test image. From the eye digital image, the computer obtains data on the pupil size and a trace of the tested eye. A pattern recognition computer program and five measurement parameters are used to distinguish the position of the pupil, calculate the pupil location coordinate and analyze the physical conditions of the user. These data can be plotted against the average brightness and contrast of the VR video image in real time. This information is shown on the screen of a personal computer and used for cross-link analysis. This eye-tracking interface can determine the position of a subject's pupil and map that position into a display point on a computer screen. The pupil size and location data versus the average brightness and contrast of a VR video image are computed in real time.     

Wavelength dependent damage in biological multi-photon confocal microscopy: A micro-spectroscopic comparison between femtosecond Ti:sapphire and Cr:forsterite laser sources

Molecular excitation by the simultaneous absorption of two photons provides intrinsic three-dimensional resolution in laser scanning fluorescence microscopy. Thus induced two-photon absorption and the accompanied multi-photon absorption/ionization not only cause photo-bleaching but also cell damage in the vicinity of the focal point. In this paper, we study the wavelength dependent cell damage induced by high intensity femtosecond near infrared lasers. The study was performed with a Ti:sapphire laser and a Cr:forsterite laser. With a longer output wavelength from a Cr:forsterite laser, multi-photon absorption and auto-fluorescence were found to be significantly suppressed and the destructive plasma formation was found to be greatly reduced. Sustained multi-photon spectra can be observed in most plant specimens with a tightly focused Cr:forsterite laser beam under long term irradiation with more than 100 mW laser average power. In contrast, multi-photon absorption induced destructive plasma formation were frequently observed with a tightly focused Ti:sapphire laser beam within seconds with more than 10 mW laser average power.     

一种减少基于SOA的全光时钟提取码型效应的新方法

全光位时钟提取是3R全光再生的关键技术,本文针对利用基于半导体光放大器注入锁模激光器进行位时钟提取时的码型效应,提出一种利用非线性偏振旋转自稳幅效应减少码型效应的新方法,对40Gb/s的半导体光放大器注入锁模激光器位时钟提取,通过数值模拟计算证明,利用非线性偏振旋转可以有效地减少码型效应的影响.     

Ultrafast dynamics in the excited hydrogen atom transfer states of ammonia clusters

Neutral ammonia clusters (NH₃)_m are photo-excited to the electronic state by a deep UV femtosecond laser pump pulse. Within a few hundred femtoseconds a significant fraction of the clusters rearrange to form an H-transfer state (NH₃)_m-2NH₄(3s)NH₂ with the subunit NH₄ in its 3s electronic ground state. This state is then electronically excited by a time-delayed infrared control pulse of variable wavelength. Finally, a third (probe) pulse in the UV ionizes the clusters for detection. The lifetime of the excited (NH₃)_m-2NH₄(3p)NH₂ states is found to vary between 2.7 and 0.13 ps depending on cluster size and excitation energy. It increases drastically upon deuteration. The corresponding cluster size-dependent photoelectron spectra allow us to disentangle the underlying energetics of the excitation and ionization process and reveal additional processes, such as nonresonant ionization or dissociative ionization. The experimental findings suggest that the excited H-transfer ammonia complexes with m > 2 are deactivated by an internal conversion process back to the electronically lowest H-transfer state followed by fast dissociation. Received 22 September 2001 and Received in final form 31 January 2002