Thermal stability of amorphous SiOC/crystalline Fe composite

We examined the thermal stability of amorphous silicon oxycarbide (SiOC) and crystalline Fe composite by in situ and ex situ annealing. The Fe/SiOC multilayer thin films were grown via magnetron sputtering with controlled length scales on a surface-oxidized Si (100) substrate. These Fe/SiOC multilayers were in situ or ex situ annealed at temperature of 600 °C or lower. The thin multilayer sample (~10 nm) was observed to have a layer breakdown after 600 °C annealing. Diffusion starts from low groove angle triple junctions in Fe layers. In contrast, the thick multilayer structure (~70 nm) was found to be stable and an intermixed layer (Fe_xSi_yO_z) was observed after 600 °C annealing. The thickness of the intermixed layer does not vary as annealing time goes up. The results suggest that the Fe_xSi_yO_z layer can impede further Fe, Si and O diffusion, and assists in maintaining morphological stability.     

大型固体激光器光束定位稳定性分析

根据 ICF驱动器系统工程的要求 ,建立光学元件运动量与靶点光束定位之间关系 ,对稳定性进行初估。运用 B类评定方法、光线追迹方法和有限元数值模拟方法进行检验和校正 ,使其更具有可行性。并从结构随机振动理论出发 ,将结构用单自由度线性系统的平稳随机振动模拟 ,实现稳定性值激励源的重分。     

Enhancement of soft X-ray emission from a pinch plasma using a rotating plasma for pre-ionization

An experimental study on the enhancement of soft X-ray emission from a pinch plasma has been carried out by using a rotating plasma for pre-ionization. The rotating plasma is produced by a pulsed J×B cross-field discharge between coaxial electrodes, and subjected to a pinch discharge. Under an optimized discharge condition, it has been observed that UV emission of 251.6 nm (Ar III) soft X-ray intensity increases with increasing applied axial magnetic field B. At 400 G, the X-ray intensity is enhanced by a factor of 3 compared to that without the rotating plasma. It is considered that this result is due to the improved characteristics of the pre-ionization rotating plasma, which influences the uniformity and stability of subsequent pinch plasma.     

有机小分子发光材料与聚合物发光材料在大气存放条件下的稳定性对比研究

分别采用紫外光电子能谱（UPS）、X光电子能谱（XPS）、原子力显微镜（AFM）、以及光致发光光谱（PL）等方法对在大气存放条件下的8－羟基喹啉铝（Alq)薄膜和聚（9,9－二辛烷基芴）（PFO）薄膜的电子结构、表面形 及发光特性进行了对比。研究结果表明,PFO的电子结构、表面形貌以及发光特性受外界气氛影响极小,是一种非常稳定的聚合物发光材料。这为聚合物发光器件的稳定性提供了有利的条件。     

泡沫混凝土发泡剂的发泡性能研究

为提高混凝土发泡剂性能,分别选用月桂酰基肌氨酸钠(LS-95)、甲基葡萄糖苷聚氧乙烯(120)醚双油酸酯(DOE-120)和丙烯酸交联树脂(340)对常用发泡剂十二烷基苯磺酸钠(LAS)进行复配研究.通过罗氏泡沫仪的起泡高度和消泡半衰期表征发泡剂泡沫稳定性,并对产生的结果进行解释.实验结果表明,在适当条件下,3种复配添加剂都能在一定程度上改善十二烷基苯磺酸钠的泡沫性能,其中0.7% LAS加入25%(与LAS质量比)的DOE-120和10%(与LAS质量比)的340所组成的三组分复合体系,泡沫性能优异.     

一类带有回馈控制的捕食-食饵模型正周期解的存在性(英文)

研究了一类具有Hassell-Varely功能性反应函数的食饵-捕食模型的回馈控制系统,利用比较连续定理和一致度定理,证明了系统正周期解的存在性,并通过构造Lyapunov函数给出了系统全局稳定性的充分条件和证明.     

Effects of ultrasound treatment on the morphological characteristics,structures and emulsifying properties of genipin cross-linked myofibrillar protein

Genipin is a natural crosslinker that improves the functional properties of proteins by modifying its structures. This study aimed to investigate the effects of sonication on the emulsifying properties of different genipin concentration-induced myofibrillar protein (MP) cross-linking. The structural characteristics, solubility, emulsifying properties, and rheological properties of genipin-induced MP crosslinking without sonication (Native), sonication before crosslinking (UMP), and sonication after crosslinking (MPU) treatments were determined, and the interaction between genipin and MP were estimated by molecular docking. The results demonstrated that hydrogen bond might be the main forces for genipin binding to the MP, and 0.5 μM/mg genipin was a desirable concentration for protein cross-linking to improve MP emulsion stability. Ultrasound treatment before and after crosslinking were better than Native treatment to improve the emulsifying stability index (ESI) of MP. Among the three treatment groups at the 0.5 μM/mg genipin treatment, the MPU treatment group showed the smallest size, most uniform protein particle distribution, and the highest ESI (59.89%). Additionally, the highest α-helix (41.96%) in the MPU + G5 group may be conducive to the formation of a stable and multilayer oil–water interface. Furthermore, the free groups, solubility, and protein exposure extent of the MPU groups were higher than those of UMP and Native groups. Therefore, this work suggests that the treatment of cross-linking followed by ultrasound (MPU) could be a desirable approach for improving the emulsifying stability of MP.     

碳纳米管的稳定性研究

石墨晶体结构遭到破坏时,总是碎化为微小尺寸的片状粉末.孤立的石墨烯片在其边缘存在大量的悬挂键,使得石墨烯片的能量较高,状态也不稳定.石墨烯片卷曲形成碳纳米管后,悬挂键减少,系统能量相应降低.另一方面,石墨烯片卷曲形成碳纳米管将产生相应的形变势能,形变势能的产生将抵消由于减少石墨烯片边缘上的悬挂键所带来的能量降低,使碳纳米管的能量可能高于石墨烯片的能量,导致碳纳米管结构的不稳定.在建立碳纳米管生成的力学模型并进行深入理论分析的基础上得出了碳纳米管可以稳定存在的最小直径约为0.32nm的结论. 关键词： 碳纳米管 稳定性 形变势能 键能     

Feasibility of self-correcting quantum memory and thermal stability of topological order

Recently, it has become apparent that the thermal stability of topologically ordered systems at finite temperature, as discussed in condensed matter physics, can be studied by addressing the feasibility of self-correcting quantum memory, as discussed in quantum information science. Here, with this correspondence in mind, we propose a model of quantum codes that may cover a large class of physically realizable quantum memory. The model is supported by a certain class of gapped spin Hamiltonians, called stabilizer Hamiltonians, with translation symmetries and a small number of ground states that does not grow with the system size. We show that the model does not work as self-correcting quantum memory due to a certain topological constraint on geometric shapes of its logical operators. This quantum coding theoretical result implies that systems covered or approximated by the model cannot have thermally stable topological order, meaning that systems cannot be stable against both thermal fluctuations and local perturbations simultaneously in two and three spatial dimensions.     

高温超导线圈在大电流下稳定性的数值仿真

在电力应用中,超导磁体可能会因为线圈工作于过流状态而失超,也可能会因为交流损耗而导致失超.为此,我们模拟了一个磁体在大电流过载下的稳定性情况.我们使用了一个建立在热传导方程和麦克斯韦方程基础上的差分数值计算方法来得出磁体内部的温度分布.我们对各种不同的电流冲击情况进行了考察,我们的模型可以使磁体设计者在实际制作之前能够估计一个比较安全的操作电流水平,有着广泛的实用价值.