Kinetic features of ethylene polymerization over supported catalysts [2,6‐bis(imino)pyridyl iron dichloride/magnesium dichloride] with AlR3 as an activator

The effects of polymerization temperature, polymerization time, ethylene and hydrogen concentration, and effect of comonomers (hexene‐1, propylene) on the activity of supported catalyst of composition LFeCl₂/MgCl₂‐Al(i‐Bu)₃ (L = 2,6‐bis[1‐(2,6‐dimethylphenylimino)ethyl] pyridyl) and polymer characteristics (molecular weight (MW), molecular‐weight distribution (MWD), molecular structure) have been studied. Effective activation energy of ethylene polymerization over LFeCl₂/MgCl₂‐Al(i‐Bu)₃ has a value typical of supported Ziegler–Natta catalysts (11.9 kcal/mol). The polymerization reaction is of the first order with respect to monomer at the ethylene concentration >0.2 mol/L. Addition of small amounts of hydrogen (9–17%) significantly increases the activity; however, further increase in hydrogen concentration decreases the activity. The IRS and DSC analysis of PE indicates that catalyst LFeCl₂/MgCl₂‐Al(i‐Bu)₃ has a very low copolymerizing ability toward propylene and hexene‐1. MW and MWD of PE produced over these catalysts depend on the polymerization time, ethylene and hexene‐1 concentration. The activation effect of hydrogen and other kinetic features of ethylene polymerization over supported catalysts based on the Fe (II) complexes are discussed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5057–5066, 2007     

On the exact distribution of linear combinations of order statistics from dependent random variables

We study the exact distribution of linear combinations of order statistics of arbitrary (absolutely continuous) dependent random variables. In particular, we examine the case where the random variables have a joint elliptically contoured distribution and the case where the random variables are exchangeable. We investigate also the particular L-statistics that simply yield a set of order statistics, and study their joint distribution. We present the application of our results to genetic selection problems, design of cellular phone receivers, and visual acuity. We give illustrative examples based on the multivariate normal and multivariate Student t distributions.     

既不离散也不连续的随机变量

讨论了既不离散也不连续的随机变量 ,并纠正了有关文献中关于连续型随机变量定义中的错误 .     

Manufacturing cell formation using similarity coefficients and a parallel genetic TSP algorithm: Formulation and comparison

Many algorithms have been proposed to form manufacturing cells from component routings. However, many of these do not have the capability of solving large problems. We propose a procedure using similarity coefficients and a parallel genetic implementation of a TSP algorithm that is capable of solving large problems of up to 1000 parts and 1000 machines. In addition, we also compare our procedure with many existing procedures using nine well-known problems from the literature.

The results show that the proposed procedure compares well with the existing procedures and should be useful to practitioners and researchers.     

平衡规划问题的熵函数方法及其在混合交通流中的应用

将参变极值问题的极大熵函数方法应用到求解平衡规划问题中,通过先验分布信息和Kullback熵概念,给出了平衡规划问题基于Kullback熵表示的熵函数求解方法,并将平衡规划的极大熵函数方法应用于求解混合交通平衡分配问题．     

The application of spectral distribution of product of two random matrices in the factor analysis

In the factor analysis model with large cross-section and time-series dimensions,we pro- pose a new method to estimate the number of factors.Specially if the idiosyncratic terms satisfy a linear time series model,the estimators of the parameters can be obtained in the time series model. The theoretical properties of the estimators are also explored.A simulation study and an empirical analysis are conducted.     

Heat of adsorption and density distribution in slit pores with defective walls: GCMC simulation studies and comparison with experimental data

The adsorption behavior (capacity, density distribution and packing density) and the isosteric heat versus loading in a slit pore whose walls contain defective graphene layers are investigated in this paper. The defective wall is characterized by the extent and size of the defect. Simulation results obtained with the Grand Canonical Monte Carlo method reveal complex patterns of isosteric heat, and this complex behavior is a result of the interplay between three factors: (i) the surface heterogeneity (solid-fluid interaction, sites with varying degree of affinity), (ii) fluid-fluid interaction and (iii) the overlapping of potentials exerted by the two defective walls. We illustrate this with argon adsorption in pores of various sizes, and results obtained from the simulation agree qualitatively with the experimental data at 77 K on Saran microporous S600H and micro-mesoporous S84 charcoals of Beebe et al. [R.A. Beebe, B. Millard, J. Cynarski, J. Am. Chem. Soc. 75 (1953) 839]. The S600H was found to contain pores predominantly in the neighborhood of 7 Å with 30% of defect and a defective size of 2.84 Å. This is consistent with the argument made by Beebe et al. that this sample is a microporous solid and most pores can accommodate only one layer. The other sample, S84, has larger pores than S600H, and it is found that it has a wider pore size distribution and the pore width is centered at about 12 Å.     

Optimisation of fault-tolerant fabric-cutting schedules using genetic algorithms and fuzzy set theory

In apparel industry, manufacturers developed standard allowed minutes (SAMs) databases on various manufacturing operations in order to facilitate better scheduling, while effective production schedules ensure smoothness of downstream operations. As apparel manufacturing environment is fuzzy and dynamic, rigid production schedules based on SAMs become futile in the presence of any uncertainty. In this paper, a fuzzification scheme is proposed to fuzzify the static standard time so as to incorporate some uncertainties, in terms of both job-specific and human related factors, into the fabric-cutting scheduling problem. A genetic optimisation procedure is also proposed to search for fault-tolerant schedules using genetic algorithms, such that makespan and scheduling uncertainties are minimised. Two sets of real production data were collected to validate the proposed method. Experimental results indicate that the genetically optimised fault-tolerant schedules not only improve the operation performance but also minimise the scheduling risks.     

基于Copula的金融资产相关结构建模

分析了几种相关结构函数(Copula)表示的相关结构模型,给出了用相关结构函数对金融资产间的相关结构进行建模的方法.结果表明混合Gumbel(M-Gumbel)相关结构函数能较全面地描述上海深圳两证券指数的相关结构,模拟计算VaR的结果支持了实证分析的结论.     

Graphitic nanofillers in PMMA nanocomposites—An investigation of particle size and dispersion and their influence on nanocomposite properties

Mechanical, thermal, and electrical properties of graphite/PMMA composites have been evaluated as functions of particle size and dispersion of the graphitic nanofiller components via the use of three different graphitic nanofillers: “as received graphite” (ARG), “expanded graphite,” (EG) and “graphite nanoplatelets” (GNPs) EG, a graphitic materials with much lower density than ARG, was prepared from ARG flakes via an acid intercalation and thermal expansion. Subsequent sonication of EG in a liquid yielded GNPs as thin stacks of graphitic platelets with thicknesses of ～10 nm. Solution‐based processing was used to prepare PMMA composites with these three fillers. Dynamic mechanical analysis, thermal analysis, and electrical impedance measurements were carried out on the resulting composites, demonstrating that reduced particle size, high surface area, and increased surface roughness can significantly alter the graphite/polymer interface and enhance the mechanical, thermal, and electrical properties of the polymer matrix. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2097–2112, 2007