Pressurized wet digestion in open vessels

The High Pressure Asher (HPA-S) was adapted with a Teflon liner for pressurized wet digestion in open vessels. The autoclave was partly filled with water containing 5% (vol/vol) hydrogen peroxide. The digestion vessels dipped partly into the water or were arranged on top of the water by means of a special rack made of titanium or PTFE-coated stainless steel. The HPA-S was closed and pressurized with nitrogen up to 100 bars. The maximum digestion temperature was 250 °C for PFA vessels and 270 °C for quartz vessels. Digestion vessels made of quartz or PFA-Teflon with volumes between 1.5 mL (auto sampler cups) and 50 mL were tested. The maximum sample amount for quartz vessels was 0.5–1.5 g and for PFA vessels 0.2–0.5 g, depending on the material. Higher sample intake may lead to fast reactions with losses of digestion solution. The samples were digested with 5 mL HNO₃ or with 2 mL HNO₃+6 mL H₂O+2 mL H₂O₂. The total digestion time was 90–120 min and 30 min for cooling down to room temperature. Auto sampler cups made of PFA were used as digestion vessels for GFAAS. Sample material (50 mg) was digested with 0.2 mL HNO₃+0.5 mL H₂O+0.2 mL H₂O₂. The analytical data of nine certified reference materials are also within the confidential intervals for volatile elements like mercury, selenium and arsenic. No cross contamination between the digestion vessels could be observed. Due to the high gas pressure, the diffusion rate of volatile species is low and losses of elements by volatilisation could be observed only with diluted nitric acid and vessels with large cross section. In addition, cocoa, walnuts, nicotinic acid, pumpkin seeds, lubrication oil, straw, polyethylene and coal were digested and the TOC values measured. The residual carbon content came to 0.2–10% depending on the sample matrix and amount.     

Automated determination of verapamil and norverapamil in human plasma with on-line coupling of dialysis to high-performance liquid chromatography and fluorometric detection

A fully automated method for the simultaneous determination of verapamil and its main metabolite norverapamil in human plasma is described. This method is based on on-line sample preparation using dialysis followed by clean-up and enrichment of the dialysate on a precolumn and subsequent HPLC analysis with fluorometric detection. All sample handling operations were performed automatically by a sample processor equipped with a robotic arm (ASTED system). The plasma samples were dialysed on a cellulose acetate membrane (cut-off: 15 kD) and the dialysate was purified and enriched on a short pre-column filled with cyanopropyl silica. Before starting dialysis, this trace enrichment column (TEC) was first conditioned with the HPLC mobile phase and then with pH 3.0 acetate buffer. 370 μl of plasma sample spiked with the internal standard (gallopamil) were dialysed in the static-pulsed mode. The solution at the donor side was pH 3.0 acetate buffer containing Triton X-100 while the acceptor solution was made of the same acetate buffer. When dialysis was discontinued, the analytes were desorbed from the TEC by the HPLC mobile phase and transferred to the C₁₈ analytical column by means of a switching valve. This mobile phase consisted of a mixture of acetonitrile, pH 3.0 acetate buffer and 2-aminoheptane. The influence of different parameters of the dialysis process on the recovery of verapamil and norverapamil has been studied. The effect of the volume, the aspirating and dispensing flow-rates of the dialysis solution has been investigated. The recoveries of verapamil and norverapamil in plasma were close to 75% and the limits of quantification were 5 ng/ml for both analytes. The method was found to be linear in the concentration range from 5 to 500 ng/ml (r²: 0.9996 for both analytes). The intra-day and inter-day reproducibilities at a concentration of 100 ng/ml were 2.3% and 5.6% for verapamil and 1.7% and 5.1% for norverapamil, respectively.     

Sample evaporation in conventional GC split/splitless injectors. Part 1: Some quantitative estimates concerning heat consumption during evaporation

During sample evaporation in conventional vaporizing injection, the supply of heat to the evaporating liquid is a problem, first because the amounts of heat consumed are relatively large and, secondly, because the heat must be transferred to the sample within a very short time. Times available for evaporation, required amounts of heat, possible sources of heat, and the time required to transfer the heat to the sample liquid are discussed. It is shown that mixing with carrier gas contributes little heat to the evaporation process, but also that packings with glass wool have too low a heat capacity to deliver the required amount of heat to the evaporating sample. Transfer of heat from the insert wall to the sample easily requires several seconds, even if cooling of the vaporizing zone by 20° is accepted. Thus “flash evaporation” is usually impossible and most liquids must be held in the vaporizing chamber to allow full evaporation.     

From a point-like to an arbitrarily shaped sample: A survey of equations for electron paramagnetic resonance signal intensity calculations

A set of original, analytical equations useful for theoretical calculation of the electron paramagnetic resonance (EPR) signal intensity are presented for the multitude of sample shapes, which range from point-like, line-like, planar, rectangular, cubical, circular, cylindrical, spherical to an irregularly shaped sample. The samples can be situated at any available position within the prescribed part of the microwave cavity (a central cylinder of diameter 11 mm and length 23.5 mm, in either a Bruker single TE₁₀₂ or double TE₁₀₄ rectangular cavity, with the modulation coils situated in the left and right side cavity walls, which is connected to a X-band, field-modulated CW Bruker EPR spectrometer). The theoretical computations of EPR signal intensity can be used in the computer simulations in which: (i) the EPR signal intensity profiles are constructed; (ii) the optimal sample positions in the cavity to give a maximum value of signal intensity are found; (iii) the errors associated with sample positioning within the cavity when compared to a second sample of a different size, shape or position are studied.     

Speciation analysis of platinum antitumoral drugs in impacted tissues

Chemical compounds containing platinum have been employed since 1978 as drugs to beat certain type of tumours. Nevertheless, besides of their exceptional antitumoral properties, these drugs also have important deleterious side effects, such as, nephrotoxicity and ototoxicity.A study of Pt accumulation and a speciation analysis has been performed by ICP-MS in samples from kidney and inner ear in a controlled population of Wistar rats treated with, either, cisplatin, carboplatin or oxaliplatin. The results on Pt accumulation point out to drug structure and not only to Pt content as the responsible for the alteration of organ functionality.Speciation studies in the samples from kidney and inner ear were performed coupling two-dimensional liquid chromatography (2D-LC) to ICP-MS. Size exclusion (SEC) and anion exchange fast protein liquid chromatography (FPLC) was employed for 2D orthogonal separation. After these separations, free drug peaks were not observed in any of the samples.The binding of Pt to biomolecules was demonstrated by SEC and, independently of the drug used, Pt eluted as two main bands with molecular weights of 12 kDa and 25-65 kDa for inner ear samples, and as two different bands with 20 kDa and 50-60 kDa in the samples from kidney. However, the relative band intensity presented important differences for the three drugs. Using the same chromatographic conditions, it was shown that a metallothionein (MT) standard eluted in the same position as some of the cytosolic Pt-biomolecules.High Pt-containing fractions eluting from the SEC column were analysed by anion exchange FPLC after a preconcentration step. Among the different preconcentration methods tested, sample focusing on the head of the FPLC column shows main advantages. In this way, the separation by 2D chromatography of the high molecular Pt-species has been considerably improved.     

Sample preparation and isolation using planar chromatographic methods

The state of art of the various preparative planar liquid chromatographic (PLC) methods is summarized, especially for off-line and on-line sample application. The sample purification possibilities for PLC techniques are discussed. Purification and isolation strategies using forced-flow planar chromatographic techniques, such as overpressured layer chromatography and rotation planar chromatography, are suggested in the form of flow charts.     

Sample capacity in open tubular and micro-packed columns for GC

Equations have been derived from which the maximum sample size which may be loaded on a column without significantly affecting the performance may be calculated. It is shown that micro-packed columns can handle a sample which is as much as forty times larger than that which can be loaded onto wall-coated open tubular columns with comparable conditions.     

High-Throughput Analysis of Sofalcone in Human Plasma by Use of Automated 96-Well Protein Precipitation and LC-MS-MS

A sensitive and selective method for the determination of sofalcone in human plasma was established by use of protein precipitation and liquid chromatography-tandem mass spectrometry. Plasma samples were transferred into 96-well plate using an automated sample handling system and spiked with 10 L of 2 g mL^–1 internal standard solution (d₃-sofalcone). 0.5 mL of acetonitrile was added to the 96-well plate and the plasma samples were then vortexed for 30 sec. After centrifugation, the supernatant was transferred into another 96-well plate and completely evaporated at 40 °C under a stream of nitrogen. The dry residue was reconstituted with mobile phase. All sample transfer and protein precipitation was automated through the application of both the PerkinElmer MultiPROBE II HT and TOMTEC Quadra 96 workstation. The limit of quantitation of sofalcone was 2 ng mL^–1 using a sample volume of 0.2 mL for the analysis. The reproducibility of the method was evaluated by analyzing five samples at nine quality control (QC) levels over the nominal concentration range from 2 ng mL^–1 to 1000 ng mL^–1. Validation of the method showed that the assay has good precision and accuracy. Sofalcone and internal standard produced a protonated precursor ion ([M+H]⁺) at m/z 451 and 454, and both gave a corresponding product ion at m/z 315. The high sample throughput of the method has been successfully applied to a pharmacokinetic study of sofalcone in human plasma.     

Determination of Glimepiride in Human Plasma by LC-MS-MS and Comparison of Sample Preparation Methods for Glimepiride

A sensitive and selective method for quantitation of glimepiride in human plasma was established using liquid chromatography-electrospray ionization tandem mass spectrometry. Three different methods for the sample preparation of glimepiride and an internal standard were investigated (liquid-liquid extraction, solid-phase extraction and protein precipitation). Glipizide was used as an internal standard. Compounds were separated on a C₁₈ column with 80% acetonitrile and 20% deionized water (adjusted to pH 3.5 with acetic acid), as mobile phase at a flow rate of 200 L min^–1. By use of multiple reaction monitoring mode in MS-MS with liquid-liquid extraction and solid-phase extraction, glimepiride and glipizide were detected without severe interference from the human plasma matrix. Glimepiride produced a protonated precursor ion ([M+H]⁺) at m/z 491 and a corresponding product ion at m/z 352, and the internal standard produced a protonated precursor ion ([M+H]⁺) at m/z 446 and a corresponding product ion at m/z 321. The limit of quantitation was 0.1 ng mL^–1, 0.5 ng mL^–1 and 1.0 ng mL^–1 when using liquid-liquid extraction, solid-phase extraction and protein precipitation, respectively. The validation, reproducibility, stability, and recovery of the different sample preparation methods were comparable and all the methods gave reliable results. The method has been successfully applied to pharmacokinetic study of glimepiride in human plasma.     

Analysis and Speciation of Traces of Arsenic in Environmental,Food and Industrial Samples by Voltammetry: a Review

Voltammetric approaches for the determination of arsenic and speciation at trace levels are critically appraised in a review covering the literature from 1970 to 2002. Special attention is devoted to stripping modes and to issues related to the choice of working material and supporting electrolyte. A section is dedicated to the management of real samples and aspects of sample preparation. An extensive compilation, organized by real sample type, gathers essential experimental conditions. Potentiometric stripping analysis is introduced for sake of comparison. The coupling of voltammetric detection or preaccumulation with FIA, chromatography, capillary electrophoresis and ICP techniques is also addressed.