一种液晶环氧树脂固化中扩散控制动力学研究

根据扩散控制反应的基本原理 ,建立了合适的反应模型 ,描述了 4 ,4′ 二 ( 2 ,3 环氧丙氧基 )偶氮苯(DGEAP) / 4,4′ 二氨基二苯甲烷 (DDM)环氧树脂的固化行为 .该模型认为 ,随着环氧基团反应程度的提高 ,基团的反应半径将受到影响 .当体系中出现了介晶基元的有序排列时 ,与之相连的反应基团的分布也受到影响 ,有序区内的局部浓度将变大 ,产生假浓度效应 ,并最终影响扩散控制反应动力学 .通过与普通环氧树脂固化动力学的比较 ,证实了这一效应 .     

New ferromagnets of Sr8ARe3Cu4O24 (A=Sr, Ca) with an ordered perovskite structure

New phases Sr₈ARe₃Cu₄O₂₄ (A=Sr,Ca) were discovered under high-pressure/high-temperature condition. X-ray powder diffraction and electron diffraction studies for these phases indicated that they have an ordered perovskite-type structure with cubic lattices of ∼8 Å. They showed ferromagnetism at room temperature when they were synthesized under high-oxygen-pressure condition. The Ca-containing phase has a very high T_c of 440 K with a spontaneous magnetization of ∼1 μ_B/f.u.     

A Mixed Mann Iteration Process for Fixed Points of Mixed Increasing Operators in Ordered Banach Spaces

In this paper, we develop a new mixed Mann iteration process to approximate the fixed points of mixed increasing operators in ordered Banach spaces and discuss the convergence analysis of the iterative sequences generated by the iteration process. As an application, we develop a new iterative method for solving a class of nonlinear integral equations.     

Influence of aspect ratio and anisotropy distribution in ordered CoNi nanowire arrays

The size effects on magnetic properties of nanowires arrays were studied varying the nanowires diameter and maintaining the same periodicity among them, for two different nominal compositions of Co and Ni in the alloy form. The competition among magnetocrystalline and shape anisotropies changes drastically from smallest to biggest diameters altering the easy axis direction. In the case of 75% of Co in alloy, experimental values of the effective anisotropy constant (K_eff) vary from positive to negative depending on the diameter, which means a reversal of the easy axis direction. For 50% of Co the shape anisotropy dominates over the magnetocrystalline for all studied diameters.     

Universal conditions for algebraic travelling salesman problems to be efficiently solvable

We consider Travelling Salesman Problems (TSPs) where the cost of a tour is an algebraic composition of the cost coefficients that are elements of a totally ordered, commutative semigroup. Conditions for the cost matrix are stated which allow to solve these problems in polynomial time. In particular, we investigate conditions which guarantee that an optimal tour is pyramidal and can therefore be determined in O(n ²) time. Furthermore, we discuss TSP_s with Brownian as well as those with left-upper-triangular cost matrices.     

多重短程有序准化学模型: 有序原子对的对立与统一

在准化学模型框架下, 假设有序原子对同时具有可区分与不可区分的双重属性, 首先构造了双重短程有序准化学模型, 然后讨论了该模型所能满足的各类理论极限. 经总结提炼, 提出了有序原子对的对立统一理论. 基于该理论, 进一步将双重短程有序准化学模型做了一般化推广, 开发了多重短程有序准化学模型. 该模型能够有效描述二元熔体中存在多重短程有序构型时的热力学行为. 选取了至少存在两重短程有序构型的Bi-K熔体来检验模型的合理性和可靠性. 结果表明, 除配位数外, 只需4个模型参数就能合理再现该二元熔体所有的热化学数据.     

Synthesis,chemical properties,and CO2 electroreduction of π-conjugated polymers bearing imidazolium and imidazolinium rings in the polymer backbone

π-Conjugated polymers (CPs) bearing imidazolium and imidazolinium rings in the polymer backbone were prepared from a previously reported monomer, 1,3-bis(2,3-dimethyl-4-bromophenyl)imidazolium chloride, and a newly synthesized monomer, 1,3-bis(2,3-dimethyl-4-bromophenyl)imidazolinium chloride, via Sonogashira and Suzuki–Miyaura coupling reactions. The corresponding model compounds were also synthesized via the same reactions and monomers. The absorption maxima and onset position of the UV–vis spectra of the polymers were observed at longer wavelengths than those of the model compounds, thus revealing the presence of extended π-conjugation along the polymer backbone chain. Both polymers and model compounds were photoluminescent in solution and exhibited solvatochromism. The cast films of the polymers on the Pt and Ag electrodes were demonstrated to be effective catalysts for CO₂ electroreduction.     

Ordered Mesoporous Carbon and Thiolated Polyaniline Modified Electrode for Simultaneous Determination of Cadmium(II) and Lead(II) by Anodic Stripping Voltammetry

The fabrication and evaluation of a glassy carbon electrode (GCE) modified with ordered mesoporous carbon (OMC), 2‐mercaptoethanesulfonate (MES)‐tethered polyaniline (PANI) and bismuth for simultaneous determination of trace Cd²⁺ and Pb²⁺ by differential pulse anodic stripping voltammetry (DPASV) are presented here. The morphology and electrochemical properties of the fabricated electrode were respectively characterized by scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). Experimental parameters such as PANI disposition, preconcentration potential, preconcentration time and bismuth concentration were optimized. Under optimum conditions, the fabricated electrode exhibited linear calibration curves ranged from 1 to 120 nM for Cd²⁺ and Pb²⁺. The limits of detection (LOD) were 0.26 nM for Cd²⁺ and 0.16 nM for Pb²⁺ (S/N=3), respectively. Additionally, repeatability, reproducibility, interference and application were also investigated, and the proposed electrode exhibited excellent performance. The proposed method could be extended for the development of other new sensors for heavy metal determination.     

具有优异甲醇耐受性的Rh掺杂PdCu有序金属间化合物纳米粒子增强氧还原电催化

Direct methanol fuel cells (DMFCs), as one of the important energy conversion devices, are of great interest in the fields of energy, catalysis and materials. However, the application of DMFCs is presently challenged because of the limited activity and durability of cathode catalysts as well as the poisoning issues caused by methanol permeation to the cathode during operation. Herein, we report a new class of Rh-doped PdCu nanoparticles (NPs) with ordered intermetallic structure for enhancing the activity and durability of the cathode for oxygen reduction reaction (ORR) and achieving superior methanol tolerance. The disordered Rh-doped PdCu NPs can be prepared via a simple wet-chemical method, followed by annealing to convert it to ordered phases. The results of transmission electron microscopy (TEM), scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS), power X-ray diffraction (PXRD) analysis and high resolution TEM (HRTEM) successfully demonstrate the formation of near-spherical NPs with an average size of 6.5 ± 0.5 nm and the conversion of the phase structure. The complete phase transition temperatures of Rh-doped PdCu NPs and PdCu are 500 and 400 ℃, respectively. The molar ratio of Rh/Pd/Cu in the as-synthesized Rh-doped PdCu NPs is 5/48/47. Benefitting from Rh doping and the presence of the ordered intermetallic structure, the Rh-doped PdCu intermetallic electrocatalyst achieves the maximum ORR mass activity of 0.96 A·mg^-1 at 0.9 V versus reversible hydrogen electrode (RHE) under alkaline conditions—a 7.4-fold enhancement compared to the commercial Pt/C catalyst. For different electrocatalysts, the ORR activities follow the sequence, ordered Rh-doped PdCu intermetallics > ordered PdCu intermetallics > disordered Rh-doped PdCu NPs > disordered PdCu NPs > commercial Pt/C catalyst. In addition, the distinct structure endows the Rh-doped PdCu intermetallics with highly stable ORR durability with unaltered half-wave potential (E_1/2) and mass activity after continuous 20000 cycles, which are higher than those of other electrocatalysts. Furthermore, the E_1/2 of the Rh-doped PdCu intermetallics decreases by only 5 mV after adding 0.5 mol·L^-1 methanol to the electrolyte, while the commercial Pt/C catalyst negatively shifts by 235 mV and a distinct oxidation peak can be observed. The results indicate that the ORR activity of the Rh-doped PdCu intermetallic electrocatalyst can be well maintained even in the presence of poisoning environment. Our results have demonstrated that Rh-doped PdCu NPs with ordered intermetallic structures is a potential electrocatalyst toward the next-generation high-performance DMFCs.     

有序介孔硅胶及其复合材料作固定相在液相色谱中的应用

系统地介绍了有序介孔硅胶及其复合材料的研究进展。重点评述了颗粒状无机介孔硅胶材料、颗粒状有机-无机复合介孔硅胶材料、手性介孔硅胶材料和整块介孔硅胶材料在用作液相色谱固定相方面的最新进展。对硅基有序介孔材料制备方面存在的问题进行了分析,并就该领域今后的发展趋势做了展望。