Non-dynamical stochastic resonance: Theory and experiments with white and various coloured noises

Summary We describe the simplest system which shows stochastic resonance. A linear(ized) theory for white and (almost) arbitrarily coloured noise is presented. The presented new system has new, unique properties which originate from itsnon-dynamical character; for example, the strength and phase shift of periodic response of the system is independent of the frequency. Experiments have been carried out with the following noise processes: (physical) white noise, (physical) Lorentzian noise and (physical) 1/f noise. With a small extension of the system, its linear-response regime can be significantly increased. As the system is similar to some simple models of neurones, the new results might have not only physical but also biological importance. Paper presented at the International Workshop “Fluctuations in Physics and Biology: Stochastic Resonance, Signal Processing and Related Phenomena”, Elba, 5–10 June 1994.     

基于“慕课”的物理类微课程设计探索

“慕课”起步,微课程先行!鉴于目前微课程设计缺乏规范模式,本文旨在对此进行深入探讨．在微课程设计缺乏充分的理论基础支持的前提下,本文首先利用文献综述法归纳得出微课程的基本特征,据此确定微课程设计原则;其次以此原则为指导,借鉴远程开放教育的设计模式,类比探索出微课程设计的基本模式;最后将这种微课程设计模式应用于物理类课程,并结合物理类课程特点进行实证分析,成功实现了物理类微课程设计．教学实践活动进一步检验了本文构建的微课程设计模式切实可行、效果良好．     

红外双波段双层谐衍射光学系统设计

将谐衍射透镜应用在传统红外单波段佩茨瓦尔(Petzval)物镜上,设计得到工作波段处于3.4~4.2μm和8~11μm的红外双波段单层谐衍射光学系统。但单层谐衍射元件的衍射效率只在设计波长处衍射效率最高,随着波长相对设计中心波长向两侧偏离,主衍射级次的衍射效率逐渐下降。为提高含单层谐衍射元件光学系统的衍射效率,基于双层衍射元件衍射效率表达式研究了双层谐衍射元件的结构优化,给出了优化方法。设计出佩茨瓦尔型红外双波段双层谐衍射光学系统,其在3.4~4.2μm和8~11μm两个工作波段的衍射效率均达到90%以上,相比含有单层谐衍射面的光学系统衍射效率有了很大提升,提高了像面衬比度,完善了系统成像质量。     

含有双层谐衍射元件的红外双波段光学系统消热差设计

用投影无热差图和双层衍射元件选玻璃的原则,选择了适用红外双波段消热差、消色差的玻璃组合.为提高衍射效率,基于双层衍射元件衍射效率表达式研究了双层谐衍射元件的结构优化,给出了优化方法.利用双层谐衍射元件设计的折衍混合双波段光学系统视场角10°,F#为2,有效焦距115 mm.系统在3.4~4.2 μm和8~11 μm两个工作波段的衍射效率均达到90%以上;－40~100℃温度范围内,中心视场的调制传递函数值变化最大为0.09、边缘视场的调制传递函数值变化最大为0.13.     

Optimisation of TA6V alloy surface laser texturing using an experimental design approach

Active surfaces of plastic injection moulds are nowadays textured using classical techniques (chemical etching or EDM). Replacement of these technologies by a laser technology introduces a big flexibility: absence of mechanical contact with the tool, decrease of the effluent's volume and a big machining precision, even in the case of the complex forms as injection moulds for example. This paper reports the experimental study of the surface laser texturing of TA6V alloy. The influence of the operating factors on the laser texturing process has been studied using two experimental approaches: Taguchi methodology and response surface methodology (RSM). Empirical models have been developed. They allowed us to determine a correlation between process operating factors and performance indicators, such as surface roughness and material removal rate. Results analysis shows that the laser pulse energy and frequency are the most important operating factors. Mathematical models, that have been developed, can be used for the selection of operating factors’ proper values in order to obtain the desired values of the objective functions.     

Systematics on fission fragment mass distribution of neutron induced 235U fission

Based on the neutron induced fission fragment mass distribution data up to neutron energy 20 MeV measured with the double kinetic energy method (KEM) and the radio active method (RAM), the systematics of fission fragment mass distribution was investigated by using 5 Gaussian model and the systematics parameters were obtained by fitting the experimental data. With the systematics, the yields of any mass A and at any energy in the region from 0 to 20 MeV of neutron energy can be calculated. The calculated results could well reproduce the experimental data measured with KEM, but show some systematical deviation from the data measured by RAM, which reflects some systematical deviations between the two kinds of measured data.The error of systematics yield was calculated in an exact error transformation way, including from the error of the experimental yield data to the error of the discrete parameters, then to the systematics parameters,and at last to the yield calculated with systematics.     

Ab initio multi-reference configuration interaction of the low-lying states of the AsP molecule

Nine low-lying electronic states of the AsP molecule, including Σ , Ⅱ, and △ symmetries with singlet, triplet, and quintet spin multiplicities, are studied using multi-reference configuration interaction method.The potential energy curves and the spectroscopic constants of these nine states are determined, and compared with the experimental observed data as well as other theoretical works available at present.Three quintet states are reported for the first time.Furthermore, the analytical potential energy functions of these states are fitted using Murrell-Sorbie function and least square fitting method.     

建立学生助教机制，提高实验教学质量

针对当前实验教学中存在的一些问题,建立了学生助教机制.阐述了学生助教实施方法、学生助教的作用以及所取得的效果.     

基于USB的卫星通用化地面测试软件的设计

本文将软件工程中的组件技术引入卫星测试领域,提出了利用测试功能组件构建通用化测试软件的设计思路。首先,对现有卫星型号的地面测试任务做共性研究;其次,总结通用化测试软件的研制需求;然后,进行软件概要设计和详细设计;最后,软件实现。经验证,本文提出的基于USB接口的卫星通用化地面测试软件,通用性强,能较好的满足多个分系统单机设备的测试要求。     

The national ignition facility: path to ignition in the laboratory

The National Ignition Facility (NIF) is a 192-beam laser facility presently under construction at LLNL. When completed, NIF will be a 1.8-MJ, 500-TW ultraviolet laser system. Its missions are to obtain fusion ignition and to perform high energy density experiments in support of the US nuclear weapons stockpile. Four of the NIF beams have been commissioned to demonstrate laser performance and to commission the target area including target and beam alignment and laser timing. During this time, NIF demonstrated on a single-beam basis that it will meet its performance goals and demonstrated its precision and flexibility for pulse shaping, pointing, timing and beam conditioning. It also performed four important experiments for Inertial Confinement Fusion and High Energy Density Science. Presently, the project is installing production hardware to complete the project in 2009 with the goal to begin ignition experiments in 2010. An integrated plan has been developed including the NIF operations, user equipment such as diagnostics and cryogenic target capability, and experiments and calculations to meet this goal. This talk will provide NIF status, the plan to complete NIF, and the path to ignition.