Linear quadratic regulator for laser beam shaping

The performance of an adaptive optics system depends on multiple factors, including the quality of the laser beam before being projected to the mesosphere. In general, cumbersome procedures are required to optimize the laser beam in terms of amplitude and phase. However, aberrations produced by the optics of the laser beam system are still detected during the operations due to, for example, uncertainty in the utilized models. In this paper we propose the use of feedback to overcome the presence of model uncertainty and disturbances. In particular we use a Linear Quadratic Regulator (LQR) for closed loop laser beam shaping using a setup of two deformable mirrors. The proposed method is studied and simulated to provide an automatic optimization of the Amplitude of the laser beam. The performance of the LQR control algorithm is evaluated via numerical simulations using the root mean square error (RMSE). The results show an effective amplitude correction of the laser system aberrations after 20 iterations of the algorithm, a RMSE less than 0.7 was obtained, with about 140 actuators per mirror and a separation of z=3 [m] among the mirrors.     

对关联在反磁转动中的作用（英文）

采用基于推转壳模型的粒子数守恒方法对105Cd 和106Cd 中的反磁转动带进行了研究,在计算当中,粒子数严格守恒,并且堵塞效应也是严格考虑的。计算结果很好地再现了实验上观测到的I-Ω 关系、转动惯量以及约化跃迁几率B（E2）。通过检验双剪角,即两个质子空穴角动量的合拢,对反磁转动中的双剪刀机制进行了分析。研究表明剪刀角的合拢非常敏感地依赖于对关联。The antimagnetic rotation bands in 105;106Cd are investigated by the cranked shell model with pairing correlations treated by a particle-number conserving method, in which the blocking effects are taken into account exactly. The experimental moments of inertia, I-Ω relation and the reduced B(E2) transition probabilities are well reproduced. The two-shears-like mechanism for the antimagnetic rotation is investigated by examining the shears angle, i.e., the closing of the two proton hole angular momenta. The sensitive dependence of the shears angle on the nuclear pairing correlations is revealed.     

HL—1装置密度极限破裂分析

HL-1装置上观测到大量的密度极限破裂放电。其主要特性是破裂前偏离几何中心的磁面位移很小,中心区总是观测到锯齿现象,破裂后,其电流中断时间大于20ms。本文详细分析了出现在电流上升段,坪段及下降段密度极限破裂的特征。其中一类是由于辐射功率超过加热功率所确定的村上极限,没有观测到先兆振荡;另一类是由于约束变坏所确定的赫吉尔极限,可观测到驰豫几毫秒的先兆振荡,这类放电破裂后多数能恢复。该装置运行的最大村上参数是0.35×10~(20)m~(-2).T~(-1)。     

Analysis of atom detection via the magnetic optical effect

We demonstrated a new method of atom detection by means of the magnetic optical effect. The number density of the atom cloud was measured by detecting the rotation angle of the polarization plane of linearly polarized probe light when propagating inside the atomic cloud. Detuning, the magnetic field and light intensity dependencies of the rotation angle were studied theoretically and experimentally to find the best parameter for atom detection. In this way, we managed to achieve a rotation angle of 0.22 rad with a signal to noise ratio (SNR) of 75 and a contrast of 87.5%.     

基于辐射声功率最小化的安静结构设计

本文研究了一种基于模型修改使结构辐射声功率最小的方法，使用了结构动力学、声学和优化理论等学科知识，对结构修改后固有频率变化可以忽略不计时的声辐射优化进行了研究，将设计变量看作外部阻抗，对结构的表面振速进行了重新分布，可以降低结构辐射的声功率。将质量块与动力吸振器进行组合实现声辐射最小化，不但降低了一定频率范围内的平均声功率，还降低了动力吸振器所对应的单频下的声功率；运用遗传算法搜索结构辐射声功率最小时附加质量块或动力吸振器的位置，对附加质量块和有源控制作用下简支钢板的声功率最小化进行了比较研究，阐明了附加外部结构与有源控制实现安静结构的物理机理。最后，对本文提出的基于平板辐射声功率最小化的安静结构设计方法进行了实验验证。     

中心化开放式大学物理实验教学管理系统的设计

研究型大学建设背景下,农林院校大学物理实验实行中心化开放式教学,有效发挥公共基础课教学的基础性作用,具有十分重要的意义.根据高等农林院校中心化开放式教学的特点,采用B/S和C/S混合模式,设计了中心化开放式大学物理实验教学管理系统.该系统的使用保证了中心化开放式大学物理实验教学体系的运行,实现了多元化的考核方式,使物理实验教学中心资源发挥了最大效益,在提高学生的综合素质、培养学生的创新精神与实践能力方面发挥重要作用.     

膨胀机力学模拟试验装置

为了适应当前发展的需要,本试验装置可以研究G-M制冷机中的膨胀机在动态环境下能否可靠工作,为其提供了强有力的试验平台。本装置可以单独实现水平面的旋转或垂直面的翻转,还可以同时实现水平面的旋转和垂直面的翻转。对G-M制冷机扩大应用领域是不可或缺的试验装置。     

Microwave spectrum and structure of methyl phosphonic difluoride

The rotational spectrum of methyl phosphonic difluoride has been reinvestigated using a pulsed-molecular-beam Fabry-Perot cavity microwave spectrometer. The enhanced resolution of the Fourier transform microwave (FTMW) spectrometer (compared to the original work done in a conventional Stark spectrometer) has allowed the measurement of small A-E splittings of many of the rotational transitions caused by the internal rotation of the methyl top. The barrier to internal rotation, V₃ = 676 (25) cm⁻¹, has been determined experimentally from the A-E splittings of the rotational transitions in the ground vibrational state. This barrier height is substantially lower than the previously determined value for the barrier, which was 1252 (14) cm⁻¹. High-level ab initio calculations at the MP2/aug-cc-pVTZ level predict a barrier to internal rotation of 638 cm⁻¹, in agreement with the experimentally determined value found here. The high sensitivity of the FTMW spectrometer has also permitted the measurement of the ¹³C and ¹⁸O isotopomers in natural abundance. The addition of these two isotopomers has allowed an improved structural determination.     

Global fit analysis including the ν9 + ν4 − ν4 hot band of ethane: Evidence of an interaction with the ν12 fundamental

The ν₉ fundamental band of ethane occurs in the 12 μm region. It is the strongest band of ethane in a terrestrial window and is commonly used for the identification of ethane in the Jovian planets. The ν₉ + ν₄ − ν₄ band occurs in the same region; neither can be analysed as an isolated band, since both are embedded in the torsional bath of the ground vibrational state. We report here two global fit models including data from both of these bands as well as the ν₃ fundamental and the ν₄, 2ν₄ − ν₄, and 3ν₄ torsional transitions. The first is restricted to −5 ? KΔK ? 15 in the hot band and gives an excellent fit to the included data. Three resonant interactions are identified in this fit—a Coriolis interaction with two resonant cases between the ν₉ torsional stack and that of the ground vibrational state (gs) and a resonant Fermi interaction between the ν₃ fundamental and the gs. Hot band lines with KΔK < −5 are influenced by a fourth perturbation, with a crossing at −11 < KΔK < −10, which has been attributed to an interaction with the ν₁₂ fundamental. A second fit, demonstrating a promising treatment of this interaction, is also presented.     

Optimal design of a convergent-barrel cold spray nozzle by numerical method

A convergent-barrel (CB) cold spray nozzle was designed through numerical simulation. It was found that the main factors influencing significantly particle velocity and temperature include the length and diameter of the barrel section, the nature of the accelerating gas and its pressure and temperature, and the particle size. Particles can achieve a relatively low velocity but a high temperature under the same gas pressure using a CB nozzle compared to a convergent-divergent (CD) nozzle. The experiment results with Cu powder using the designed CB nozzle confirmed that particle deposition can be realized under a lower gas pressure with a CB nozzle.