磁粉法检测表面裂纹概率曲线的测定

本文介绍了利用实物零件测定裂纹检出概率的方法，并作出了用磁粉法检测表面裂纹的检测概率曲线，为大型构件检测周期的确定提供了可靠数据，为结构损伤容限设计，可靠性设计提供了重要的依据。     

Effects of angle of probe laser and pinhole diameter on the time-resolved optical inspection system

A real-time in-situ time-resolved optical inspection system comprising two He-Ne probe lasers, a digital oscilloscope, and three fast photodetectors is developed. The effects of angle of probe laser and pinhole diameter on the time-resolved optical inspection system are investigated during excimer laser crystallization. The longest melt duration and ablation excimer laser fluence are independent of pinhole size. The pinhole with a diameter of 0.3 mm is recommended to use in the time-resolved optical inspection system. Determination of melt duration and observation of explosive crystallization oscillation are independent of angle of probe laser, but four criteria for the relationship between probe lasers and photodetectors should be followed.     

A new method to characterizing surface roughness of TiO2 thin films

Titanium dioxide (TiO₂) thin films have been widely coated in the self-cleaning glass for facade application. The benefit of these glasses is its ability to actively decompose organic compounds with the help of ultraviolet light. Understanding the surface roughness of TiO₂ thin films is important before manufacturing of self-cleaning glasses using TiO₂ thin films because surface roughness of TiO₂ thin films has highly significant influence on the photocatalytic performance. Traditional approach for measuring surface roughness of TiO₂ thin films is atomic force microscopy. The disadvantage of this approach include long lead-time and slow measurement speed. To solve this problem, an optical inspection system for rapidly measuring the surface roughness of TiO₂ thin films is developed in this study. It is found that the incident angle of 60° is a good candidate for measuring surface roughness of TiO₂ thin films and y=90.391x+0.5123 is a trend equation for predicting the surface roughness of TiO₂ thin films. Roughness average (Ra) of TiO₂ thin films (y) can be directly determined from the peak power density (x) using the optical inspection system developed. The results were verified by white-light interferometer. The measurement error rate of the optical inspection system developed can be controlled by about 8.8%. The saving in inspection time of the surface roughness of TiO₂ thin films is up to 83%.     

Surface structure monitoring with plastic optical fiber

A sensor was designed using a plastic optical fiber to study the potential of detecting structural deformities and corrosion of metallic surfaces, in particular for applications in constricted areas such as pipes. The principle of the sensor is based on the collection of scattered light reflected by the surface imperfections. Several types of metallic materials in various surface profiles and stages of corrosion have been studied. The sensor was able to determine the position of ridges on the surface and corroded regions in all cases evaluated in the study. A sensitivity of 100 mV/mm was detectable for proximity and a vertical resolution of 1 mm has been measured.     

X-Y振镜扫描式舌诊高光谱采集系统

针对目前舌诊研究中在舌体信息全面获取方面存在严重不足,将高光谱技术用到舌诊的研究中来,提出了一种基于X-Y振镜扫描式舌诊高光谱采集系统.通过模拟实验,采集与舌体大小相似图片的高光谱信息,验证了该系统可以用于舌体高光谱信息采集,实验结果表明,与现有舌诊客观化研究相比,该系统可以获得更多的舌体信息,为舌诊客观化研究提供了一...     

两种不同系统因素影响下完全检验的最优设计

本文研究了两种不同系统因素影响下完全检验的质量最优问题 ,采用有两种不同控制界限的控制图来控制生产过程 ,并根据完全检验的特点 ,提出了一种新的最优模型。 Hui(1 991 )提出的最优模型是本文的最优模型的特殊情况 ,并且本文建立的最优模型还可推广到两种以上不同的系统因素下影响的情况     

Optimal Sequencing of Inspection of Dependent Characteristics

We address the problem of sequentially inspecting the dependent characteristics of a product, where the dependency is expressed in terms of the joint probabilities of the fitness of the characteristics. We show that, even when the inspection has classification errors, the joint probability mass function of the observed fitness of the characteristics is independent of the sequence of inspection. Using this result, a dynamic programming approach is presented for finding the optimal sequence that minimizes the expected total cost of inspection. Previously reported policies for independent characteristics are shown to be special cases of the results presented here.     

AT&T准则下完全检验的最优设计(英文)

本文研究了完全检验的质量控制问题,将广泛用于X-控制图的AT＆amp;T准则应用于完全检验,并根据完全检验的特点,提出一种新的最优模型,数值实验结果表明AT＆amp;T准则下的完全检验优于传统的完全检验。     

Application of computer vision and laser interferometer to the inspection of line scale

In the paper machine vision, laser interferometer and coordinate measuring machine (CMM) are combined to develop a vision inspection system. The measurement capability of the developed system is investigated by measuring the distances between the lines on a standard line scale. The vision camera is used to replace the probe of the CMM to take the images of the interested lines on a line scale at two different positions. Meanwhile, the displacement of the CCD camera is measured using laser interferometer. Using subpixel edge localization and outlier-excluding least-squares regression, the distance between two interested lines is computed under an image plane coordinate system. By adding the displacement of the CCD camera measured using laser interferometer, the line space can be determined. Experiments have been performed repeatedly to measure the line space on the 1.00 and 300.0 mm line scales. Results indicate that the measured data only have a little fluctuation and are close to those obtained by the NML (National Measurement Laboratory, Taiwan).     

食品中铝检测方法研究进展

介绍了食品中铝的来源,并综述了近十年中食品中铝测定方法的研究进展,包括电感耦合等离子体原子发射光谱法、电感耦合等离子体质谱法、石墨炉原子吸收光谱法、电化学分析法以及分光光度法等方法(引用文献75篇)。