Pressurized wet digestion in open vessels

The High Pressure Asher (HPA-S) was adapted with a Teflon liner for pressurized wet digestion in open vessels. The autoclave was partly filled with water containing 5% (vol/vol) hydrogen peroxide. The digestion vessels dipped partly into the water or were arranged on top of the water by means of a special rack made of titanium or PTFE-coated stainless steel. The HPA-S was closed and pressurized with nitrogen up to 100 bars. The maximum digestion temperature was 250 °C for PFA vessels and 270 °C for quartz vessels. Digestion vessels made of quartz or PFA-Teflon with volumes between 1.5 mL (auto sampler cups) and 50 mL were tested. The maximum sample amount for quartz vessels was 0.5–1.5 g and for PFA vessels 0.2–0.5 g, depending on the material. Higher sample intake may lead to fast reactions with losses of digestion solution. The samples were digested with 5 mL HNO₃ or with 2 mL HNO₃+6 mL H₂O+2 mL H₂O₂. The total digestion time was 90–120 min and 30 min for cooling down to room temperature. Auto sampler cups made of PFA were used as digestion vessels for GFAAS. Sample material (50 mg) was digested with 0.2 mL HNO₃+0.5 mL H₂O+0.2 mL H₂O₂. The analytical data of nine certified reference materials are also within the confidential intervals for volatile elements like mercury, selenium and arsenic. No cross contamination between the digestion vessels could be observed. Due to the high gas pressure, the diffusion rate of volatile species is low and losses of elements by volatilisation could be observed only with diluted nitric acid and vessels with large cross section. In addition, cocoa, walnuts, nicotinic acid, pumpkin seeds, lubrication oil, straw, polyethylene and coal were digested and the TOC values measured. The residual carbon content came to 0.2–10% depending on the sample matrix and amount.     

Optimization of an electrolytic conductivity detector for determination of toxic nitrogen-containing food contaminants separated by open tubular column gas chromatography

The combination of open tubular column gas chromatography with electrolytic conductivity detection has been evaluated for the determination of nitrogen-containing pesticide residues in food extracts. Optimization of the column position at the column-detector interface was crucial to the successful operation of the detector. The signal-to-noise ratio and response stability of the detector are greatly influenced by the composition of the electrolyte solvent. Large volume splitless injections using retention gaps and optimized detector operating conditions enabled pesticide residues in food extracts to be determined at sub parts-per-million levels. Although the electrolytic conductivity detector is less sensitive than the thermionic ionization detector, its greater nitrogen selectivity can he crucial to the determination of nitrogen-containing contaminants in food extracts, particularly in complex mixtures where phosphorus-containing contaminants or matrix compounds are also present.     

Diffusion-averaged molecular weights of «nonboiling» crude oil fractions

Summary The successful application of the formerly presented concept of diffusion-averaged molecular weight, M_d, to vacuum residues of crude oils, or their fractions, is described. The samples for establishing the calibration curve, logDvs. logM, were crude oil fractions with polydispersities smaller than 1.1. In a surprisingly good approximation the calibration curve is independent of the origin of these fractions if 500<M<10000. The validity of our calibration curve was demonstrated with more than 10 crude oil residues and with some of their hydrogenation residues [2].     

邻氨基酚电聚合膜的研究

在酸性溶液中, 邻氨基酚(OAP)可电聚合成均匀的活性聚邻氮基酚膜(POAP), 膜有致密结构和“张开”结构。POAP膜的主要结构形式为: 与Ni~(2+)络合后, 形成POAP—Ni~(2+)膜, 其主要结构形式为:     

镍电极开路电位测定微量硼氢根离子

实验采用循环伏安法，用镍电极代替铂铑等贵金属电极测定了碱性体系中不同硼氢根离子浓度下的开路电位，得出了研究电极的开路电位（-0．355～-0．280vs.SCE／V）与微量硼氢根离子浓度的对应关系，并用于监测电解偏硼酸钠制备硼氢化钠体系中微量硼氢根离子，同时计算了该方法的误差。结果表明，测量结果的相对标准偏差为2．2％；回收率为98．4％。该法简单、快速，可测定10^-5～10^-3mol／L范围的硼氢根离子浓度。     

Synthesis, crystal structure and magnetic property of a new nickel selenite chloride: Ni5(SeO3)4Cl2

The new nickel selenite chloride, Ni₅(SeO₃)₄Cl₂, was obtained by high-temperature solid state reaction of NiCl₂, Ni₂O₃ and SeO₂ in a 1:2:4 molar ratio at 700 °C in an evacuated quartz tube. Its structure was established by single-crystal X-ray diffraction. Ni₅(SeO₃)₄Cl₂ crystallizes in the triclinic system, space group P-1 (No. 2) with cell parameters of a=8.076(2), b=9.288(2), c=9.376(2) Å, α=101.97(3), β=105.60(3), γ=91.83(3)° and Z=2. All nickel(II) ions in Ni₅(SeO₃)₄Cl₂ are octahedrally coordinated by selenite oxygens or/and chloride anions (([Ni(1)O₅Cl], [Ni(2)O₄Cl₂], [Ni(3)O₅Cl], [Ni(4)O₆] and [Ni(5)O₄Cl]). The structure of the title compound features a condensed three-dimensional (3D) network built by Ni(II) ions interconnected by SeO₃²⁻ anions as well as Cl⁻ anions. Magnetic property measurements show strong antiferromagnetic interaction between nickel(II) ions.     

Optimum performance of capillary GC columns as a function of tube diameter and film thickness under various operating conditions. Computer program for calculation of H-ū curves and minimum analysis times

The Golay-Giddings and Poiseuille equations are used to derive equations for the calculation of the maximum plate number and minimum time conditions for given columns at fixed, but selectable, outlet pressures. In addition, expressions are presented for the determination of minimum analysis times for separation problems requiring given plate numbers. In this instance, the optimum column length can be calculated as a function of outlet pressure. A Basic computer program, incorporating the equations for the various optima, together with the H-ū curves, is described. Input variables are either column length or desired plate number, column diameter, film thickness, capacity ratio of the solute, column outlet pressure, seperation temperature, and carrier gas. The carrier gas viscosity is automatically calculated in the case of hydrogen, helium, or nitrogen. For these gases, and if the solute is a n-alkane, the diffusivity of the solute in the mobile phase is calculated. In this case, the carbon number of the solute is needed in the computation. For high molecular weight polydimethylsilicone phases (e.g. SE-30), the program can approximate the diffusivity of n-alkanes in the stationary phase at the given temperature as a function of the carbon number. Of course, manually entered values of viscosity and diffusion coefficients can be included in the calculations.     

Static dipole polarizabilities of open-shell negative ions

Summary Dipole polarizability estimates at have been calculated for the 2p and 3p open-shell negative ions in their ground and valence excited states. To complete the sequence such estimates for F^– and Cl^– in their ground¹ S state have also been made. Single configuration based linear response theory has been adopted presently with a view to study the effect of RPA-type correlations on the polarizabilities of such systems. For the 3p open-shell systems the innermost 1s core has been kept frozen. Most of the results are reported for the first time. Agreement with existing data, wherever available, is reasonable. The convergence of the polarizability estimates towards basis sets has been studied.     

Syntheses, crystal structures and characterizations of BaZn(SeO3)2 and BaZn(TeO3)Cl2

Two new barium zinc selenite and tellurite, namely, BaZn(SeO₃)₂ and BaZn(TeO₃)Cl₂, have been synthesized by the solid state reaction. The structure of BaZn(SeO₃)₂ features double chains of [Zn(SeO₃)₂]²⁻ anions composed of four- and eight-member rings which are alternatively along a-axis. The double chains of [Zn₂(TeO₃)₂Cl₃]³⁻ anions in BaZn(TeO₃)Cl₂ are formed by Zn₃Te₃ rings in which each tellurite group connects with three ZnO₃Cl tetrahedra. BaZn(SeO₃)₂ and BaZn(TeO₃)Cl₂ are wide bandgap semiconductors based on optical diffuse reflectance spectrum measurements.     

铜在3%NaCl溶液中腐蚀行为的光电化学研究

Cu以其优异的导电性、导热性和易加工性广泛用于工农业生产中．自然Cu的腐蚀和防腐成为人们很关注的问题．人们已经注意到，Cl-对Cu的腐蚀有影响，并进行过一些研究．但目前使用光电化学方法研究这一问题的文章尚不多见，特别是利用测量开路光电压及其瞬态波形这一现场的、无损的、灵敏的监测方法研究户对Cu电极腐蚀全过程的文章尚未见到．本文正是利用如上方法及XPS，AES方法，研究了Cl-对Cu电极腐蚀的全过程，取得了一些有意义的结果．1实验方法Cu电极用99．99％（质量分数）的Cu制成，面积约为39mm2；电极底部由Cu导线焊接引出，…