Role of solvent in the compatibility of a vinylchloride–vinylacetate–maleic acid terpolymer and nitrocellulose blends

The compatibility of cast films of a vinylchloride–vinylacetate–maleic acid terpolymer (VMCH) and nitrocellulose (NC) blends is influenced by solvents. Transparent films of VMCH/NC blends are obtained when cast from solvents such as tetrahydrofuran or cyclohexanone, whereas hazy films are obtained when cast from solvents such as acetone or ethylacetate. Visible spectroscopy and phase morphology were used to analyse the compatibility–incompatibility of the blend. Differential scanning calorimetry (DSC) studies demonstrate that the transparent film is compatible, but the hazy film is incompatible. Fourier transform infra-red (FTIR) studies establish that a greater interaction is observed between the polymer pair in case of the compatible blend than in the case of the incompatible blend. A solvent dependency of blend compatibility is reflected in this study. The conformational state of the polymers in solution, which is responsible for the compatibility phenomena, may depend on the donor number and/or Taft-β value of the solvent. The greater the donor number and/or the Taft-β value, the higher may be the level of interaction between the solvent and the polymer molecules, which in turn may give a compatible blend after removal of the solvent.     

New In-situ Sampling and Analysis of the Production of CeO<Subscript>2</Subscript> Powders from Liquid Precursors using a Novel Wet Collection System in a rf Inductively Coupled Thermal Plasma Reactor. Part 1: Reactor System and Sampling Probe

A new reactor and a novel in-situ sampling technique were developed for the study of the synthesis of CeO₂ powders produced from dissolved cerium nitrate salts. The conical reactor minimized particle recirculation and provided a highly symmetrical and undisturbed plasma flow suitable for the analysis of the phenomena affecting the formation of CeO₂ powders. Both a calorimetric study of the reactor and a thermodynamic analysis of CeO₂ formation were conducted. The sampling probe is described and near-isokinetic sampling was achieved. The sampled particles were collected using a miniature wet collection system, i.e. a mist atomizer and a custom-made spray chamber. A numerical simulation of the velocity and temperature fields of the plasma gas in the reactor was done using Fluent. A comprehensive droplet-to-particle formation mechanism presented elsewhere is revisited and expanded based on calorimetry, thermodynamics of CeO₂ formation, numerical simulations and collected particles. No traces of other oxidation states other than CeO₂ were found.     

Thermodynamic characteristics of solvation of individual ions in ethanol at −50 to 55°C

Experimentally determined are the enthalpies of solution of 12 electrolytes (LiBr, LiI, NaBr, NaI, NaBPh₄, Et₄NCl, Et₄NBr, Pr₄Br, Bu₄NBr, Am₄NBr, Ph₄PCl, Ph₄PBr) in ethanol at –50 to 55°C. _sH^o values obtained on the basis of four different extrapolation equations are analyzed. The effect of temperature changes on the thermodynamic parameters of solvation indindividual ions are calculated using thermodynamic data for the salt crystals (lattice) with the assumption that _solvC _p ^o (Ph₄P⁺)=_solvC _p ^o (Ph₄P^-).     

MORPHOLOGY OF POLYBUTADIENE “SHISH KEBABS”

Shish kebab structure of cis-1 , 4-polybutadiene has been obtained by quiescent solution crystallization at suitable temperature. The morphology and growth mechanism of formation of shish kebab structure have been studied in detail.The higher the molecular weight the faster the sample crystallizes.     

PBT／PET共混体系的协同效应

ＰＢＴ、ＰＥＴ具有良好相容性，且两种聚合物分子链间存在相互作用，它们的共混体系在熔体降温结晶过程中以及溶液中均表现出协同效应。虽然ＰＢＴ、ＰＥＴ在共混体系中各自形成晶区，但熔体降温结果过程中只能观察到一个结晶放热峰，当ＰＢＴ／ＰＥＴ共混物中两组份分子链段数目相近时，熔体降温结晶峰温较低，峰形变宽，共混体系的结晶程度降低在溶液中两组份分子链段数目相近时，共混物特性粘度（η）值最大，分子链的均方根末端     

Micropatterning of semicrystalline poly(vinylidene fluoride) (PVDF) solutions

Micropatterning of a semicrystalline poly(vinylidene fluoride) (PVDF) solution was performed by a temperature controlled capillary micromolding where the rate of solvent evaporation was controlled by substrate temperature. In order to choose proper solvents for micropatterning, we have investigated the solubility of PVDF in various organic solvents and crystal structures of the PVDF bulk films cast from the solvents. The films prepared from the polar solvents such as dimethylformamide (DMF), dimethyl sulfoxide (DMSO) dominantly showed γ type crystals regardless of preparation temperature, while the films from tetrahydrofuran (THF) exhibit α type crystals and the ones from acetone and methyl ethyl ketone (MEK) show the characteristics of both α- and γ-PVDF. The quality of micropatterns and shapes of the PVDF crystals in the patterns significantly depend on solvent evaporation rates. Micropatterns of PVDF formed in DMF at 120 °C showed the best uniformity in shape. Crystals of the PVDF nucleated at the center regions of microchannels tended to be elongated with the b-axis of γ-PVDF crystals along the channels as the concentration of the solution decreased. In contrast, crystals nucleated at the corner regions of the channels had their b-axis oriented perpendicular to the channels. In line patterns with the width of 2 μm, the corner nucleated crystals were dominant and a resulting bamboo-like crystalline microstructure was observed in which the b-axis of γ-PVDF crystals, fast growth direction, is oriented normal to the microchannels. The crystal structures of the bulk films and the micropatterns were characterized by X-ray diffractometer, Fourier transform infrared spectroscope in Attenuated Total Reflection mode, Polarized Optical and Scanning Electron Microscope.     

以Δpe 表示的一次加入标准法计算公式和数值表

本文提出一个以(10~(△pe)-1)~(-1)对△pe表示的离子选择电极一次加入标准法结果处理数值表。该表简单明了,不含电极斜率因素,适用于具有各种斜率的电极和不同价态离子的测定。     

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Poly(propylene carbonate) (PPC) is a new biodegradable aliphatic polycarbonate. However, the poor thermal stability and low glass transition temperatures (T_g) have limited its applications. To improve the thermal properties of PPC, organophilic montmorillonite (OMMT) was mixed with PPC by a solution intercalation method to produce nanocomposites. An intercalated-and-flocculated structure of PPC/OMMT nanocomposites was confirmed by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The thermal and mechanical properties of PPC/OMMT nanocomposites were investigated by thermal gravimetric analysis (TGA), differential scanning calorimetric (DSC), and electronic tensile tester. Due to the nanometer-sized dispersion of layered silicate in polymer matrix, PPC/OMMT nanocomposites exhibit improved thermal and mechanical properties than pure PPC. When the OMMT content is 4 wt%, the PPC/OMMT nanocomposite shows the best thermal and mechanical properties. These results indicate that nanocomposition is an efficient and convenient method to improve the properties of PPC.     

N-Nosyl-α-amino acids in solution phase peptide synthesis

A highly efficient and practical synthesis of peptides in solution phase has been developed. The procedure is based on the use of p-nitrobenzenesulfonyl (nosyl) group for the protection of the amino function of α-amino acids. Every step of the procedure, protection of the amino function by the nosyl group, formation of the peptide bond, and removal of the sulfonamide group, is characterized by high yields and excellent purity of the final products. The described strategy allows the preparation of short peptide sequences keeping the chiral integrity of amino acid precursors. Compatibility of nosyl group with the side-chain protecting groups used in Fmoc-based strategy is demonstrated. The method here presented is an alternative strategy that could provide advantages for future peptide synthesis.     

溶液中聚电解质分子内激态缔合体的形成

采用荧光分光光度法,实验测定了聚苯乙烯磺酸钠在无盐和有盐的水溶液中,单体和激态缔合体的荧光发射光谱.结果表明:激态缔合体单体发射强度比I_E/I_M随外加盐种类、浓度和价态而变化.在相同盐浓度下,各体系的I_E/I_M次序为:KCl>NaCl>LiCl和CaCl_2>MgCl_2。 也研究了NaCl水溶液中聚电解质分子的荧光猝灭.结果表明:随外加盐浓度逐渐增大,聚电解质分子由类棒状向无规线团状转化,该状态有利于激态缔合体的形成.