Physicochemical characterization of phosphinic pseudopeptides by capillary zone electrophoresis in highly acidic background electrolytes

Phosphinic pseudopeptides (i.e., peptide isosteres with one peptide bond replaced by a phosphinic acid moiety) were analyzed and physicochemically characterized by capillary zone electrophoresis in the pH range of 1.1-3.2, employing phosphoric, phosphinic, oxalic and dichloroacetic acids as background electrolyte (BGE) constituents. The acid dissociation constant (pK(a)) of phosphinate group in phosphinic pseudopeptides and ionic mobilities of these analytes were determined from the pH dependence of their effective electrophoretic mobilities corrected to standard temperature and constant ionic strength of the BGEs. It was shown that these corrections are necessary whenever precise mobility data at very low pH are to be determined. Additionally, it was found that the ionic mobilities of the phosphinic pseudopeptides and pK(a) of their phosphinate group are affected by the BGE constituent used. The variability of migration behavior of the pseudopeptides can be attributed to their ion-pairing formation with the BGE components.     

Binding of Benzyltrimethylammonium Bromide and its Alkyldimethylbenzylammonium Homologues by β-Cyclodextrin in Water

The binding constants, K′, for the reaction between some alkyldimethylbenzylammonium bromide homologues (alkyl = methyl, ethyl, propyl, butyl, hexyl, decyl, and dodecyl, respectively) and β-cyclodextrin in water at 25.0 ± 0.1 ^∘C have been determined, by applying the spectral displacement technique with phenolphthalein as the displacing anion. It has been shown that the ln K′ values increase linearly with the number of carbon atoms in the alkyl chain for the salts whose alkyl chain has at least four carbon atoms. The ln K′ values estimated for the parent compound benzyltrimetylammonium bromide and its two nearest homologues are distinctly lower than might be expected by extrapolation of the linear relation found for the higher homologues. Assuming that it is the organic cation that undergoes association with β-cyclodextrin, then one may suppose that a change occurs in the mode of inclusion of the cation upon passing to higher homologues. In the case of the lighter homologues, it is the phenylene group that undergoes inclusion. This model of inclusion is confirmed by analysis of rotating-frame overhauser effect spectroscopy (ROESY) spectra.     

Spectroscopic investigation of β-cyclodextrin -metoprolol tartrate inclusion complexes

Aqueous-solution complexes of β-cyclodextrin (β-CD) with metoprolol tartrate (MET) have been analysed with ¹H NMR and UV–vis spectroscopy. With ¹H NMR a [1:1] stoichiometry could be established for the β-CD-MET complex while its stability constant was determined with UV–vis spectroscopy. Powder diffraction data of a polycrystalline sample of the β-CD-MET complex show that a novel product has been formed, likely to be a β-CD-MET [1:1] inclusion complex. Also Hyperchem MM+ molecular-dynamics results suggest an inclusion complex and from ¹H NMR data it is inferred that probably the MET is docked in the CD with the formers methoxyethyl-benzene moiety in front. Mihaela Toma is Socrates/Erasmus student at UNED Madrid     

The dissociation quotients of formic acid in sodium chloride solutions to 200°C

The dissociation quotients of formic acid were measured potentiometrically from 25 to 200°C in NaCl solutions at ionic strengths of 0.1, 0.3 1.0, 3.0, and 5.0 mol-kg^–1. The experiments were carried out in a concentration cell with hydrogen electrodes. The resulting molal acid dissociation quotients for formic acid, as well as a set of infinite dilution literature values and a calorimetrically-determined enthalpy of reaction, were fitted by an empirical equation involving an extended Debye Hückel term and seven adjustable parameters involving functions of temperature and ionic strength. This regressional analysis yielded the following thermodynamic quantities for 25°C: logK=–3.755±0.002, H^o=–0.09±0.15 kJ-mol^–1, S^o=–72.2±0.5 J-K^–1-mol^–1, and C _p ^o =–147±4 J-K^–1-mol^–1. The isocoulombic form of the equilibrium constant is recommended for extrapolation to higher temperatures.     

Selectivity for Cs and Sr in Nb-substituted titanosilicate with sitinakite topology

The 25% niobium substituted crystalline titanosilicate with the composition Na_1.5Nb_0.5Ti_1.5O₃SiO₄·2H₂O (Nb-TS) was synthesized under hydrothermal conditions. Its selectivity for radioactive ¹³⁷Cs and ⁸⁹Sr was compared with the TS, Na₂Ti₂O₃SiO₄·2H₂O, having sitinakite topology. The Nb-TS shows significantly higher uptake value for ¹³⁷Cs but lower for ⁸⁹Sr than the TS. To investigate the origin of selectivity, the ion exchanged Cs⁺ and Sr²⁺ forms with the composition, Cs_xNaH_yNb_0.5Ti_1.5O₃SiO₄·zH₂O (x=0.1, 0.2 and 0.3, x+y=0.5 and z=1-2) and Sr_0.2Na_0.6H_0.5Nb_0.5Ti_1.5O₃SiO₄·H₂O, respectively, were structurally characterized from the X-ray powder diffraction data using the Rietveld refinement technique. Simultaneously the kinetics of ¹³⁷Cs and ⁸⁹Sr uptake was investigated for the Nb^V free and doped samples. While the Cs⁺ and Sr²⁺ exchanged form of Nb-TS and the Cs⁺ exchanged form of TS retain the symmetry of the parent compound, the Sr²⁺ exchanged form of TS undergoes a symmetry change. The differences in the uptake of Cs⁺ and Sr²⁺ result from the different coordination environments of cesium and strontium in the eight-ring channel, that result from various hydration sites in the tunnel. The origin of selectivity appears to arise from the higher coordination number of cesium or strontium. Other effects due to Nb^V substitution are reflected in the increase of both, the a- and c-dimensions and thus the unit cell volume, and the population of water vs. Na⁺ in the channel to charge-balance the Nb⁵⁺↔Ti⁴⁺ substitution.     

Role of plasticizer's dielectric constant on conductivity modification of PEO-NH4F polymer electrolytes

The addition of plasticizer to the polyethylene oxide (PEO)-ammonium fluoride (NH₄F) polymer electrolytes has been found to result in an increase in conductivity value and the magnitude of increase has been found to depend upon the dielectric constant of the plasticizer used. The addition of dimethylacetamide as a plasticizer with dielectric constant (?=37.8) higher than that of PEO (?∼5) results in an increase of conductivity by more than three orders of magnitude whereas the addition of diethylcarbonate as a plasticizer with dielectric constant (?=2.82) lower than that of PEO does not enhance the conductivity of PEO-NH₄F polymer electrolytes. The increase in conductivity has further been found to depend upon the concentration of plasticizer, the concentration of salt in the polymer electrolyte as well as on the dielectric constant value of the plasticizer used. The conductivity modification with the addition of plasticizer has been explained on the basis of dissociation of ion aggregates formed in PEO-NH₄F polymer electrolytes at higher salt concentrations.     

Extraction Equilibria between Benzene and Water of Uni- and Bivalent Metal Picrates with Lariat 16-Crown-5: Effect of the Side Arms on the Extraction Ability and Selectivity

The overall extraction constants (K_ex) of uni- andbivalent metal picrates with 15-(2,5-dioxahexyl)-15-methyl-16-crown-5(L16C5) were determined between benzene and water at 25°C. TheK_ex values were analyzed into the constituent equilibriumconstants, i.e., the extraction constant of picric acid, the distributionconstant of the crown ether, the stability constant of the metalion–crown ether complex in water, and the ion-pair extraction constantof the complex cation with the picrate anion. The K_ex valuedecreases in the orders Ag⁺ > Na⁺ >Tl⁺ > K⁺ > Li⁺ andPb²⁺ > Ba²⁺ > Sr²⁺ for theuni- and bivalent metals, respectively, which are the same as those observedfor 16C5. The extraction selectivity was found to be governed by theselectivity of the ion-pair extraction of the L16C5–metal picratecomplex rather than by that of the complex formation in water. Theextraction ability of L16C5 is smaller for all the metals than that of 16C5,which is mostly attributed to the higher lipophilicity of L16C5. Differencesin the extraction selectivity between L16C5 and 16C5 were observed for thebivalent metals but little for the univalent metals. The side-arm effect onthe extraction selectivity was interpreted on the basis of the negativecorrelation between the effect on the complex stability constant in waterand that on the ion-pair extraction constant.     

Two Intercalation Mechanisms of Oxazole Yellow Dimer (YOYO-1) into DNA

The oxazole yellow dye, YOYO-1 (a symmetric homodimer), is a commonly used molecule for staining DNA. We applied the brightness analysis to study the intercalation of YOYO-1 into the DNA. We distinguished two binding modes of the dye to dsDNA: mono-intercalation and bis-intercalation. Bis-intercalation consists of two consecutive mono-intercalation steps, characterised by two distinct equilibrium constants (with the average number of base pair per binding site equals 3.5): K1=3.36±0.43×107M−1 and K2=1.90±0.61×105M−1, respectively. Mono-intercalation dominates at high concentrations of YOYO-1. Bis-intercalation occurs at low concentrations.     

[(dien)Cu(imH)](ClO4)2、[(tren)Cu(imH)](ClO4)2中配位咪唑的离解

本文用紫外可见光谱、pH滴定等方法研究了配合物[(dien)Cu(imH)](ClO₄)₂、[(tren)Cu(imH))(ClO₄)₂中Cu-imH的配位和离解作用,得到了它们的稳定常数,并探索了共存配体的影响。     

Conductivity Studies of <Emphasis Type="Italic">n</Emphasis>-Tetrabutylammonium Tetraphenylborate in 3-Pentanone in the Temperature Range from 283.15 to 329.15 K

The molar conductivities (Λ) of solutions of n-tetrabutylammonium tetraphenylborate (NBu₄BPh₄) in 3-pentanone have been measured in the temperature range from 283.15 to 329.15 K. The conductance data have been analyzed using the Lee-Wheaton conductivity equation with the distance parameter (a) set at Bjerrum’s pairing distance, and the limiting molar conductivities (Λ_o) and the association equilibrium constants (K _A) have been derived. The limiting ion conductivities (λ_±^o) have been evaluated according to the method of Krumgalz. The λ₊ ^o values have been compared with λ₊ ^o values calculated from the empirical equation of Gill. The thermodynamic functions, Gibbs energy (Δ G _A ^o), enthalpy (Δ H _A ^o) and entropy (Δ S _A ^o) for the process of ion-pair formation as well as the activation energy of the ionic movement (ΔH ^∗) have been evaluated. The obtained results are discussed in terms of ion-ion and ion-solvent interactions.