γ-Fe2O3纳米粉的低热固相制备及其电磁损耗特性(英)

The Fe(OH)₃ precursor was prepared by solid -state reaction with Fe(NO₃)₃·9H₂O, NaOH and dispersed poly-ethylene glycol at low heating temperature(25 ℃). Synthesis of iron oxide (γ-Fe₂O₃) nanoparticle was achieved by thermal decomposition of Fe(OH)₃·xH₂O precursor. The nanoparticle was characterized by TG-DTA, X-ray diffra-ction, TEM etc. The results showed that the nanoparticle was composed of γ-Fe₂O₃ and was a better absorber for electromagnetic wave within the low frequency band.     

Effect of surface treatment on the Hamaker constant of intermediate modulus carbon fibers

The Hamaker constant of unsized intermediate modulus carbon fibers was evaluated by contact angle measurement following the Fowkes theory of interfacial energetics. The effects of a surface treatment (performed by the manufacturer) and an oxygen plasma treatment (performed by us), both of oxidizing nature, proved to slightly increase the value of the Hamaker constant to a level that enhanced by about 9% the Lifshitz-van der Waals contribution to the theoretical adhesion force between the fiber and an epoxy matrix. A possible explanation of the observed increase of the Hamaker constant is the higher contribution to the overall Lifshitz-van der Waals interaction of Keesom (orientation) and Debye (induction) forces.     

Kinetics and mechanisms in carbocationic polymerization: The quest for true rate constants

This article is a critical analysis of kinetic dataavailable on carbocationic polymerizations. A survey of published propagation rate constant (k_p) data revealed several orders of magnitude differences. In this article, an explanation of this apparent discrepancy is offered with a case study involving the carbocationic polymerization of 2,4,6‐trimethylstyrene (TMS). With the polymerization mechanism originally proposed for this system, k_p = 1.35 × 10⁴ L mol^?1 s^?1 was extracted from experimental data with the Predici polyreaction package. The alternative mechanism yielded k_p = 1.01 × 10⁷ L mol^?1 s^?1, close to that predicted by Mayr's Linear Free Energy Relationship (LFER). We propose that true rate constants can only be obtained from direct competition experiments or from kinetic interpretation based on independently proven mechanisms. The second part of this review discusses critical analysis of the temperature and concentration dependence of various living IB systems. Comparison of the temperature dependence in systems initiated with 2‐ chloro‐2,4, 4‐ trimethylpentane (TMPCl)/TiCl₄ from various laboratories yielded of ΔH ～?25 and ?34.5 kJ/mol for high and low TMPCl/TiCl₄ ratios, respectively. Aromatic (cumyl‐type) initiators show ΔH ～ ?40 kJ/mol, whereas H₂O/TiCl₄ in the presence of the strong electron‐ pair donor dimethylacetamide gave ΔH = ?12 kJ/mol. The significant differences indicate different underlying mechanisms with complex elementary reactions. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5394–5413, 2005     

Investigation of the interaction between acridine orange and bovine serum albumin

The results from the measurement of the fluorescence spectrum showing the binding characteristics of acridine orange (AO) and bovine serum albumin (BSA) are reported. It was found that the equilibrium constant k=4848.64 l mol⁻¹, and the number of binding sites n=0.82. Based on the mechanism of the Forster energy transference, the transfer efficiency of energy and distance between the acceptor AO and BSA were found. The interaction between AO and BSA have been verified as consistent with the static quenching procedure and the quenching mechanism is related to the energy transfer.     

C60-地塞米松的激光激发

利用激光光解装置检测了C60-地塞米松(C60-DE)的苯溶液在355 nm激光照射下产生的激发三重态, 3C60-DE*出现四个吸收峰, 分别位于700、440、350 和310 nm. 在330 nm处观察到了它的漂白吸收最大值, 这与其基态吸收最大值相对应. 3C60-DE*能够将能量转移给O2分子而淬灭. 与3C60*相比, 3C60-DE*的三重态鄄三重态(T-T)淬灭速率常数减小(3C60*为(5.03±1.31)×109 L·mol-1·s-1, 3C60-DE*为(3.53±0.87)×109 L·mol-1·s-1), 而寿命增加了(3C60*为(12.0±2.6) μs, 3C60-DE*为(18.0±3.3) μs), 这可能是C60分子上连接了地塞米松分子后减小了C60球之间碰撞的几率所致.     

Prediction of retention time of phenols in liquid chromatography

The chromatographic behavior of phenols in reversed-phase mode liquid chromatography differs from that of non-ionic compounds such as alkyl alcohols, alkylbenzenes, halogenated benzenes, polyaromatic hydrocarbons, and aromatic acids. Therefore, the retention times of 61 phenols were measured in a system of an octadecyl bonded silica gel and acetonitrile/water mixtures. The logarithm of the capacity ratio (log k') was found to be a linear function of the hydrophobicity (log P) in acidic acetonitrile/water mixtures. This result was applied to a different octadecyl bonded silica gel. Eight phenols were selected as standard compounds, and their log k' values were measured in 0.05 M phosphoric acid in 10 to 90% acetonitrile/water mixtures. An empirical polynomial relation was obtained between the concentration of acetonitrile and the slope of the log k' vs log P curve. Finally the capacity ratio of all phenols were calculated in given eluents by the equations derived from the measurements of standard compounds and the calculated log P values. The difference between predicted capacity ratios and measured ones was within 10%.     

Formation of photo-functional spiroxazine monolayers and their dielectric constant determination using surface plasmon resonance

Spiroxazine are of considerable interest as photochromic materials because of their application. On the other hand, surface plasmon resonance (SPR) is a well-known optical method for measuring optical constants of thin film. In this study, photochromic materials were used as self-assembled monolayers (SAMs) of newly synthesized spiroxazine derivatives. We used Fresnel equation (four-layer model) to determine the precise dielectric constant () of the photochromic monolayers. Structure changes of spiroxazine derivatives under UV-light irradiation resulted in the change of optical constants, the dielectric constant and thickness. The obtained results indicated that the ring opening of photochromic spiroxazine can lead to the decrease in the dielectric constant and thickness.     

Conductometric study of Bu4NClO4 in propylene carbonate-acetonitrile and propylene carbonate-toluene mixtures at 25°C

Conductometric measurements of tetrabutylammonium perchlorate in propylene carbonate-acetonitrile and propylene carbonate-toluene mixtures at 25°C are reported. Limiting molar conductances, association constants and distance of closest approach of ions are calculated. The experimental data were analyzed by means of the Lee-Wheaton equation. The Gilkerson's solvent-solute interaction energy term was calculated from a plot of association constant logarithmvs. reciprocal dielectric constant.     

席夫碱自组装单分子膜的电化学行为

利用自组装技术将席夫碱硫醇衍生物在金表面形成自组装单分子膜,并初步研究了此自组装单分子膜的电化学行为,发现该席夫碱分子在0.1 mol•L－1的KCl溶液中具有电化学不可逆氧化还原行为，且随着自组装时间的增加表观电极反应速率常数值显著减小,最后减小为0,并对此进行了解释.     

Sampling and metrology

The result of a measurement refers in principle only to the amount of substance actually contributing to the analytical signal. However, an appropriate definition of the measurand must include a specification of the system for which the result of the measurement should apply. All systems being inherently heterogeneous, representativity assumes importance for the metrological quality of a measurement, and the process needed to ascertain representativity is sampling. The contribution from this characteristic must be included when expressing the uncertainty of the reported value of the measurand. Representative sampling of systems that are infinite or non-uniform was developed by Pierre Gy in his Theory of Sampling. Finite systems can achieve uniformity by mechanical treatment and mixing; the heterogeneity of these systems can be characterized by a sampling constant, expressed in units of weight, for each particular species being determined. Examples of the contribution of sampling to the uncertainty of analytical results are discussed for some biological materials. Presented at the 2nd International Conference on Metrology – Trends and Applications in Calibration and Testing Laboratories, November 4–6, 2003, Eilat, Israel.