3 mm波段回旋速调管放大器设计与粒子模拟

设计了一支3 mm 波段基波回旋速调管,该回旋速调管工作在低损耗的TE01模式,包含四个谐振腔。首先使用线性理论确定工作参数的大致范围, 然后采用HFSS软件设计单个谐振腔,通过调整谐振腔尺寸和腔壁介质层参数使谐振腔的谐振频率和Q值符合设计要求, 最后使用粒子模拟程序优化设计了回旋速调管的互作用电路,研究了谐振腔参差调谐方案, Q值对回旋速调管性能的影响, 互作用电路的稳定性以及电子注参数变化对注-波互作用性能的影响。PIC粒子模拟结果表明,在电子注电压65 kV, 电流6 A, α(V⊥/V∥)1.5, 工作磁场3.6 T时,回旋速调管的3 dB带宽约为600 MHz,在93.7 GHz获得139 kW 的峰值输出功率,效率为35.6%,增益为28.4 dB。模拟中没有考虑电子注速度零散的影响。     

Design,construction and characterization of the compact ultrafast terahertz free-electron laser undulator

A compact ultrafast terahertz (CUTE) free-electron laser (FEL) is being developed at the Raja Ramanna Centre for Advanced Technology (RRCAT), Indore. The undulator required for the CUTE-FEL has recently been developed. We have designed, built and characterized a variable gap, 5 cm period, 2.5 m long pure permanent magnet undulator in two identical segments. The tolerable error in the magnetic field was 1% in rms, and we have measured it to be 0.7%. The obtained rms phase shake is around 2°. To ensure that the trajectories do not have an exit error in position or angle, corrector coils have been designed. Shimming coils have been applied for both the undulator segments to reduce the amplitude of the betatron oscillations in the vertical trajectory. Details of novel corrector coils and soft iron shims are given and their performance is discussed.      

Effect of external magnetic field on critical current for the onset of virtual cathode oscillations in relativistic electron beams

In this Letter we research the space charge limiting current value at which the oscillating virtual cathode is formed in the relativistic electron beam as a function of the external magnetic field guiding the beam electrons. It is shown that the space charge limiting (critical) current decreases with growth of the external magnetic field, and that there is an optimal induction value of the magnetic field at which the critical current for the onset of virtual cathode oscillations in the electron beam is minimum. For the strong external magnetic field the space charge limiting current corresponds to the analytical relation derived under the assumption that the motion of the electron beam is one-dimensional [D.J. Sullivan, J.E. Walsh, E. Coutsias, in: V.L. Granatstein, I. Alexeff (Eds.), Virtual Cathode Oscillator (Vircator) Theory, in: High Power Microwave Sources, vol. 13, Artech House Microwave Library, 1987, Chapter 13]. Such behavior is explained by the characteristic features of the dynamics of electron space charge in the longitudinal and radial directions in the drift space at the different external magnetic fields.     

Optimized FIB silicon samples suitable for lattice parameters measurements by convergent beam electron diffraction

The aim of this paper is to check the effect of artefacts introduced by focused ion beam (FIB) milling on the strain measurement by convergent beam electron diffraction (CBED). We show that on optimized silicon FIB samples, the strain measurement can be performed with a sensitivity of about 2.5 × 10⁻⁴ which is very close to the theoretical one and we conclude that FIB preparation can be suitable for such measurements in microelectronic devices.

To achieve this, we first used CBED and electron energy loss spectroscopy (EELS) which provide a procedure permitting an exact knowledge of the sample geometry, i.e. the thickness of both amorphous and crystalline layers. This procedure was used in order to measure the FIB-amorphized sidewall layer. It was found that if the FIB preparation is optimized one can reduce this amorphous layer down to around 7 nm on each side. Secondly different preparation techniques (cleavage, Tripod™ and FIB) permit to check if the surface damaged layer introduced by FIB influences the strain state of the sample. Finally, it was found that the damaged layer does not introduce measurable strain in pure silicon but reduces appreciably the quality of the CBED patterns.     

GaAs极化电子源激活的yo-yo过程研究

通过对GaAs晶体产生极化电子束流的实验过程研究,着重对yo-yo过程中不同的实验参数对产生极化束流以及束流稳定情况的影响进行了分析,为获得稳定而持久的极化电流提供了有力的实验支持,并讨论了极化电流强度的可控性. 关键词： GaAs晶体 极化电子束 yo-yo过程 激活     

高效强流径向分离腔振荡器研究

根据同轴虚阴极的结构特点,提出了一种紧凑型径向分离腔振荡器,该径向分离腔的特点是输入电子束的电流可以很大,从而可以得到较高的微波输出功率. 综合考虑影响微波输出的各种因素,在电子束为410kV,电流为35kA的条件下,模拟得到的平均功率大于50GW,频率为146GHz,电子束功率效率达到348%. 关键词： 径向分离腔 高功率微波 同轴虚阴极 电子束分布     

基于自适应遗传算法部分相干光整形位相板的优化设计

基于自适应遗传算法,对部分相干光整形的相位板做了优化设计.以高斯-谢尔模型(GSM)光束为例,推导出远场光强的解析表达式.最优化设计的位相板能将GSM光束变为平顶光束.数值计算例表明空间相干性对光束整形效果的影响.与已有工作相比较说明自适应遗传算法用于部分相干光整形的优点. 关键词： 自适应遗传算法 光束整形 部分相干光 位相板     

中国环流器二号A(HL-2A)超声分子束注入最新结果

HL-2A装置电子回旋共振加热时,氘脉冲超声分子束穿越分界面,等离子体各项重要参数,包括等离子体储能、极向比压、中平面线平均密度、中心密度和温度上升,中子产额急剧增加. 超声分子束注入有可能较常规脉冲送气在台基顶部提供较强的粒子源,被认为是可供ITER替换脉冲送气的加料方法之一. HL-2A装置氢超声分子束注入的平均速度约为1.7km,与溢流(分子流)注入真空的速度测量作了比较. 关键词： 超声分子束注入 托卡马克 飞行时间法 加料     

像散对轴棱锥衍射特性的影响与修正

光束斜入射到轴棱锥上引起的像散将导致其衍射光场发生畸变,由衍射理论出发推导了受像散影响的轴棱锥衍射光场表达式. 通过模拟不同像散的衍射光斑图和同一像散影响下随轴向距离变化的光强分布图,分析了轴外像散对轴棱锥衍射特性的影响. 提出修正像散的方法并通过实验验证利用可调精密旋转轴棱锥修正轴外像散导致的光束畸变,理论分析和实验结果相符合,研究结果使轴棱锥的应用更加广泛. 关键词： 像散 贝塞尔光 轴棱锥 光束畸变     

基于平底孔反射体的双晶直探头测量模型

双晶探头在无损检测领域有着重要的应用,因而有必要建立一个超声测量模型来深入了解这类换能器的特点.通过将一个基于传递矩阵的多高斯声束模型和一个基尔霍夫近似方法获得的散射模型有效结合,建立了一个完整的纵波双晶直探头测量模型,用于预测平底孔缺陷体的回波信号.对比分析了平底孔反射回波信号的模型计算结果与实验测量结果,验证了该测量模型的准确性. 关键词： 超声测量模型 双晶直探头 多高斯声束模型