Propagation properties of vectorial elliptical Gaussian beams beyond the paraxial approximation

Starting from the vectorial Rayleigh diffraction integral formula and without using the far-field approximation, a solution of the wave equation beyond the paraxial approximation is found, which represents vectorial non-paraxial elliptical Gaussian beams in free space. The far-field expressions for non-paraxial Gaussian beams and elliptical Gaussian beams can be regarded as special cases treated in this paper. Some basic propagation properties of vectorial non-paraxial elliptical Gaussian beams, including the irradiance distribution, phase term, beam widths and divergence angles are studied. Numerical results are given and illustrated.     

振动系统的模态分析实验设计

利用模态分析原理和简单试验仪器，得到了直观的悬臂梁和圆盘前4阶模态振型，使学生熟悉了模态分析原理和测试方法，有利于学生对振动规律的理解．     

改进型迈克耳孙干涉仪

采用分光梭镜代替迈克耳孙干涉仪中的分束镜和补偿板，不仅消除了杂散光斑，且简化了仪器的结构．     

Decentered twisted Gaussian Schell-model beams and their propagation through a misaligned first-order optical system

The propagation properties of decentered twisted Gaussian Schell-model (DTGSM) beams passing through a misaligned first-order optical system are studied. The explicit expressions for the cross-spectral density function and Wigner distribution function of the output beam are derived, which retain their form unchanged. It is shown that the DTGSM beams preserve their closed property. The second-order moments matrix and the Wigner distribution function evolve with the usual laws, whereas the first-order moments matrix varies, as if a ray passes through such system. The propagation of DTGSM beams through an aligned first-order optical system is treated as the limiting case that corresponds to the vanishing misalignment parameters.     

MgO films grown on yttria-stabilized zirconia by molecular beam epitaxy

MgO films were grown on (0 0 1) yttria-stabilized zirconia (YSZ) substrates by molecular beam epitaxy (MBE). The crystalline structures of these films were investigated using X-ray diffraction and transmission electron microscopy. Growth temperature was varied from 350 to 550 °C, with crystalline quality being improved at higher temperatures. The MgO films had a domain structure: (1 1 1)[1 1 2¯]_MgO(0 0 1)[1 0 0]_YSZ with four twin variants related by a 90° in-plane rotation about the [1 1 1]_MgO axis. The observed epitaxial orientation was compared to previous reports of films grown by pulsed laser deposition and sputtering and explained as resulting in the lowest interface energy.     

Numerical analysis of the rotating viscous flow approaching a solid sphere

A numerical simulation is performed to investigate the flow induced by a sphere moving along the axis of a rotating cylindrical container filled with the viscous fluid. Three‐dimensional incompressible Navier–Stokes equations are solved using a finite element method. The objective of this study is to examine the feature of waves generated by the Coriolis force at moderate Rossby numbers and that to what extent the Taylor–Proudman theorem is valid for the viscous rotating flow at small Rossby number and large Reynolds number. Calculations have been undertaken at the Rossby numbers (R_o) of 1 and 0.02 and the Reynolds numbers (R_e) of 200 and 500. When R_o=O(1), inertia waves are exhibited in the rotating flow past a sphere. The effects of the Reynolds number and the ratio of the radius of the sphere and that of the rotating cylinder on the flow structure are examined. When R_o ? 1, as predicted by the Taylor–Proudman theorem for inviscid flow, the so‐called ‘Taylor column’ is also generated in the viscous fluid flow after an evolutionary course of vortical flow structures. The initial evolution and final formation of the ‘Taylor column’ are exhibited. According to the present calculation, it has been verified that major theoretical statement about the rotating flow of the inviscid fluid may still approximately predict the rotating flow structure of the viscous fluid in a certain regime of the Reynolds number. Copyright © 2004 John Wiley & Sons, Ltd.     

Optical investigation of cavitation erosion by laser-induced bubble collapse

By means of a new force sensor based on optical beam deflection (OBD), the mechanical effects of laser-matter interaction underwater at different incident laser energy are investigated in detail. The experimental results show that a target underwater is impacted in turn by laser-plasma ablation force and high-speed liquid-jet impulse induced by bubbles collapse in the vicinity of a solid boundary. Furthermore, the amplitudes of the two forces increase monotonously with laser energy. According to the ablation force detected by the experiment and the theoretical relationship between laser intensity and ablation pressure, the value of liquid-jet impact against a solid boundary can be easily obtained. In addition, based on the model of a collapsing bubble, some characteristic parameters, such as the liquid-jet impact velocity, the maximum bubble radius, the bubble energy can also be obtained at different laser energy, which are valuable in the corresponding research fields.     

Reduction of dislocation density and improvement of optical quality in ZnO layers by MgO-buffer annealing

Optical properties of ZnO thin films with/without MgO-buffer annealing were investigated by low and room temperature photoluminescence measurements. The ZnO films were grown on c-sapphire substrates by plasma-assisted molecular-beam epitaxy employing a thin MgO-buffer layer. Dislocation density of ZnO layer was reduced from 5.3 × 10⁹ to 1.9 × 10⁹ cm⁻² by annealing MgO-buffer prior to the growth of ZnO. The intensity of free exciton emission from the sample with MgO-buffer annealing was almost twice of that from the sample without annealing, while the deep level emission from the sample with MgO-buffer annealing was about 1/3 of that without annealing. The MgO-buffer annealing improves optical quality of overgrown ZnO films.     

Self-organized amorphous material in silicon (0 0 1) by focused ion beam (FIB) system

A method using a focused ion beam (FIB) to prepare a silicon amorphous material is presented. The method involves the redeposition of sputtered material generated during the interaction of the Ga⁺ ion beam with a silicon substrate material. The shape and dimensions of this amorphous material are self-organized and reproducible. The stability of this amorphous material under electron irradiation was investigated in the transmission electron microscopy (TEM). Electron irradiation can induce recrystallization of the amorphous material, resulting in the lateral and vertical growth, starting at an amorphous-crystalline interface, of polysilicon containing defects.     

The First Results of Supersonic Molecular Beam Injection in the HL-2A Tokamak

HL-2A tokamak, the first tokamak with divertor in China, has been constructed and put into operation in 2002. The main parameters are R=1.65 m, a=0.4 m, BT=2.8 T, Ip = 0. 48 MA. The divertor of HL-2A is unique, because it is characterized with a large closed divertor chamber. The device has double divertor chamber, but now it is operating with lower single null configuration to study the physics of divertor for the next step design of a divertor. Supersonic molecular beam injection （SMBI） system with LN2 cooling trap was first installed and demonstrated on the HL-2A tokamak in 2004. The first results of SMBI into HL-2A plasma are to demonstrate the function of the HL-2A divertor and to observe the cold pulse propagation during multi-pulse SMBI on HL-2A Tokamak.