BINARY DARBOUX TRANSFORMATION AND QUASIDETERMINANT SOLUTIONS OF THE CHIRAL FIELD

The standard binary Darboux transformation is composed and is used to obtain exact multisoliton solutions of the chiral field model in two dimensions. The solutions are expressed in terms of quasideterminants. It has been shown that the standard binary Darboux transformation is equivalent to the elementary binary Darboux transformation.     

Evaluation of the mechanical properties of PMC interface using slice compression test — Analysis of transfer mechanism of interfacial shear stress

Properties of the fiber/matrix interface in SiO₂/epoxy and SiC/epoxy composite are investigated using the slice compression test (SCT) for the single fiber, where the specimen is loaded and unloaded between a plate which has different mechanical properties. It is found that the interfacial debonding proceeds from the polished surface at a soft plate side and that the fiber protrusion occurs after unloading. The fiber-protrusion length is directly measured at each applied stress level using a scanning electron microscope. Interfacial shear-sliding stress is obtained based on the constant shear-sliding stress analysis employing the obtained protrusion length. It is demonstrated that the value of interfacial shear-sliding stress shows good agreement with that obtained from another technique, the push-out test, on the same system. The relation between the fiber-protrusion length and applied stress is proportional to a certain extent. From this result, it is analytically pointed out that the applied stress has a limiting value in this SCT because of Poisson's effect. Also, two interfacial debonding criteria, which are determined analytically for the PMC, are discussed.     

LBM伪势MRT三维模型GPU并行计算的性能优化

格子Boltzmann方法伪势模型算法中的格点间计算未完全局部化,因此在并行计算时需要更多次的全局内存读写、使用更多数量的寄存器和线程同步操作,从而导致GPU并行计算效率下降.本文针对伪势模型并行计算的局限性,基于三维十五速格子结构的多松弛时间伪势模型,以气液相分离为算例,通过合并访问的方式提高全局内存的读写效率;并提出一种"定向转移"算法,提高格子边界格点获取邻居格点数据的效率;最后探索不同资源分配中各种因素对计算效率的影响,总结最优资源分配的方法.     

Formation of double front detonations of a condensed-phase explosive with powdered aluminium

The performance characteristics of aluminised high explosive are considered by varying the aluminium (Al) mass fraction in a hybrid non-ideal detonation model. Since the time scales of the characteristic induction and combustion of high explosives and Al particles differ, the process of energy release behind the leading detonation wave front occurs over an extended period of time. Two cardinal observations are reported: a decrease in detonation velocity with an increase in Al mass fraction and a double front detonation (DFD) feature when anaerobic Al reaction occurs behind the front. In order to simulate the performance characteristics due to the varying Al mass fraction, the tetrahexamine tetranitramine (HMX) is considered as a base high explosive when formulating the multiphase conservation laws of mass, momentum, and energy exchanges between particles and HMX product gases. While experimental studies have been reported on the effect of Al mass fraction on both gas-phase and solid-phase detonations, the numerical investigations have been limited to only gas-phase detonation for the varying Al particles in the mixture. In the current study, a two-phase model is utilised for understanding the volumetric effects of Al mass fraction in condensed phase detonations. A series of unconfined and confined rate sticks are considered for characterising the performance of aluminised HMX with a maximum Al mass fraction of 50%. The simulated results are compared with the experimental data for 5–25% mass fractions, and the higher mass fraction behaviours are consistent with the experimental observations.     

基于光谱曲线响应特性的油膜厚度估计模型分析

如今,海上溢油事故频发,如何对溢油的油量进行估计,是一个重要课题。如果可以得到溢油量,那么对后续的处理以及损失的评估都会有较大的帮助。高光谱遥感技术的快速发展使对油膜厚度的定量估计成为可能。采用AvaSpec光谱仪测量不同厚度的油膜,然后对得到的光谱曲线的多种曲线特征进行提取,分析其与油膜厚度之间的关系。结果表明,油膜厚度与基于高光谱位置变量的Rg和Ro、三角植被指数的RDVI和TVI以及Haboudane关系式相关性较大。分别采用曲线拟合、BP神经网络和基于SVD的迭代方法建立油膜曲线特征与油膜厚度之间的预测关系,并以此对不同的油膜光谱曲线进行油膜厚度估计,对得到的结果进行精度检测和运行时间分析,最终得出对每个估计模型的分析评价。     

N2/Ti微空心阴极放电等离子体阴极溅射模拟

采用Monte Carlo方法模拟N2/Ti微空心阴极放电等离子体阴极溅射过程,其中,氮离子(N2+,N+)轰击阴极表面采用PIC/MC模型模拟.计算溅射钛原子的热化过程、钛原子的密度及其平均能量分布.结果表明,沿各方向溅射出的90%金属Ti原子所带的初始能量小于30 eV,其散射角主要分布在30°和60°之间;溅射Ti原子在离微空心阴极壁约0.04 mm处出现热化极大值.     

忆阻逾渗导电模型中的初态影响

逾渗网格模型是当前忆阻器件机理分析研究领域的热点之一, 但现有模型缺乏对初态设定的讨论. 本文对逾渗网格模型进行了简化, 并基于此, 通过电压激励步进的方式, 研究了不同初态对单极性忆阻开关元件中逾渗导电通道形成的影响, 分析了形成通道的动态过程以及相应的物理意义, 验证了忆阻开关元件高低阻态的阻值实际表现为高斯分布而非理想双值稳态; 而不同初态条件下, 忆阻开关元件导电通道的形状存在着不同的"树形"结构, 进而影响着其阻值的分布. 研究成果有助于进一步揭示忆阻器尚未明确的导电机理, 为今后对具体不同类型的忆阻元件的初态分析提供指导性作用. 关键词： 忆阻器 开关元件 逾渗模型 初态分析     

基于无模型方法的混沌系统自适应控制

传统的混沌控制方法大多需要获知混沌系统的模型知识, 但是工业实际中系统的参数经常是未知的,与此同时系统建模过程当中经常会不可避免地存在未建模的动态不确定性, 这种情况下常规的混沌控制方法不能取得优化的控制性能指标．为解决此问题, 提出了一类基于无模型方法的混沌系统自适应控制算法．该算法基于数据驱动, 无需混沌系统的先验知识, 无需训练过程, 在线调整参数较少, 是一种低成本的控制器．数学证明了该控制系统的稳定性, 仿真结果说明了这种理论的有效性． 关键词： 混沌控制 自适应 无模型 数据驱动     

Rank-based deactivation model for networks with age

We study the impact of age on network evolution which couples addition of new nodes and deactivation of old ones. During evolution, each node experiences two stages: active and inactive. The transition from the active state to the inactive one is based on the rank of the node. In this paper, we adopt age as a criterion of ranking, and propose two deactivation models that generalize previous research. In model A, the older active node possesses the higher rank, whereas in model B, the younger active node takes the higher rank. We make a comparative study between the two models through the node-degree distribution.     

时间延迟积分型面阵CMOS图像传感器MTF速度失配模型研究

研究了时间延迟积分型面阵互补金属氧化物半导体(CMOS)图像传感器调制传递函数(MTF)速度失配特性,在分析累加级数、像素尺寸、镜头放大倍数、行周期及电机运动速度失配等影响因素的基础上,建立了MTF速度失配模型。基于现场可编程门阵列(FPGA)开发板,搭建面阵CMOS图像传感器实现线阵时间延时积分(TDI)的CMOS测试系统。实验结果表明,在光强为3lx,速度失配M(ΔV/V)<2,8级时间延迟积分与面阵成像相比,MTF值提高50%;当累加级数为8级,速度失配满足M(ΔV/V)=2的速度失配容限时,奈奎斯特频率处的MTF值下降10%,当速度失配达到M(ΔV/V)=10时,MTF值下降35%。