含聚醚间隔链的扩链脲改性环氧树脂/双氰双胺固化体系性能研究

合成了一系列含不同分子量聚环氧丙烷 (PPG)柔性间隔链的扩链脲 ,系统考察了扩链脲改性环氧树脂E 5 1/双氰双胺 (dicy)固化体系的固化反应活性、动态力学行为、冲击性能和断裂面形态结构 ,并对体系的冲击性能、形态结构与动态力学行为之间的关系进行了探讨 .结果表明 ,改性体系固化反应活性明显提高 ,固化反应表观活化能降低 ,固化反应峰顶温度从 190℃降低至 14 0℃ ,固化反应的表观活化能由 14 5 5kJ/mol降至 70～ 80kJ mol;改性体系冲击强度明显提高 ,其中所含PPG柔性链分子量为 10 0 0的扩链脲改性的E 5 1/dicy体系冲击强度较未改性的E 5 1/dicy体系提高了 8倍 ,其冲击试样断裂面的形态具有明显的韧性断裂特征 ,微观两相网络结构的存在导致了改性体系冲击强度显著提高     

Valence Bond Study of Dissociation Behavior and Spectroscopic Constants for the Ground States of LiF and NaF

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅａｌｋａｌｉｈａｌｉｄｅｄｉａｔｏｍｉｃｍｏｌｅｃｕｌｅｓｐｒｏｖｉｄｅａｔｙｐｉｃａｌｃｕｒｖｅｃｒｏｓｉｎｇｐｒｏｂｌｅｍ［１］．Ｔｈｅｏｕｔｓｔａｎｄｉｎｇｎｏｎａｄｉａｂａｔｉｃｂｅｈａｖｉｏｒｏｆｔｈｅｃｈｅｍ...     

Photochemical aging of in situ polymerized blends of polystyrene and poly[acrylonitrile-g-(ethylene-co-propylene-co-diene)-g-styrene] (AES)

The influence of photochemical aging of in situ polymerized PS/AES blends on their mechanical properties has been studied. The PS/AES blends were subjected to photochemical aging for 168 h and 720 h. Tensile properties and Izod impact resistance of aged and non-aged samples were evaluated. The mechanical properties of the PS/AES blends are influenced by the polymerization temperature and blend composition and represent a balance between the toughness of EPDM and the stiffness of SAN in the PS matrix. Even though the impact resistance and strain at break of HIPS are higher than those of the PS/AES blends, after the aging period all PS/AES blends showed higher strain at break than HIPS. PS/AES blends present higher photochemical stability than HIPS.     

NFR (Natural Frequency Region) approach for dynamic evaluation of anti-vibration systems with rebound resilience method

There is no universal method to perform dynamic analysis on solid rubber anti-vibration systems. In this article, an equivalent damping ratio is introduced to account for rubber hysteresis using a resilience experiment. A new concept, NFR (Natural Frequency Region), is defined for dynamic evaluation based on natural characteristics of a rubber anti-vibration system itself. Two typical industrial products were selected to verify the proposed NFR approach. The verification procedure involves three parts: natural frequencies, harmonic spectra and impact responses. The dynamic responses from both simulation and experiment have been compared and have not only demonstrated that the proposed approach is reliable but that it could also be used to guide the design of rubber anti-vibration systems in industry. The key points for applying this approach are also presented through the verification procedure.     

Further advances on low-energy lunar impact dynamics

We extend the analysis, started in a previous work [1], concerning the formation of lunar impact craters due to low-energy trajectories. First, we adopt the Circular Restricted Three-Body Problem and consider different choices of initial conditions inside the stable invariant manifold associated with the central invariant one in the neighborhood of the L₂ equilibrium point in the Earth-Moon system. Then we move to the Bicircular Restricted Four-Body Problem to study the effect of the Sun on the distribution of impacts on the Moon’s surface.     

功能化离子液体液化木粉及其酚醛复合材料

合成了氯代1-(2-羟乙基)-3-甲基咪唑离子液体[He MIM]Cl、溴代1-乙胺基-3-甲基咪唑离子液体[Ae MIM]Br和氯代1-羧乙基-3-甲基咪唑离子液体[Ce MIM]Cl 3种功能化咪唑离子液体,并分别进行了红外与氢核磁结构表征.然后用3种离子液体液化木粉,液化3 h后向体系直接加入苯酚、甲醛和氢氧化钠,制备酚醛复合材料,并采用FTIR、XRD、DSC和SEM对酚醛复合材料进行结构、性能与形貌测试,研究离子液体种类对木粉液化率及酚醛树脂性能的影响.结果表明,离子液体及其液化木粉产物制备的酚醛复合材料性能得到明显改善.[Ce MIM]Cl液化效果最好,90℃液化率高达24.6%,当[Ce MIM]Cl与木粉质量比为10∶1时,制备的酚醛复合材料的游离醛释放量由原来的3.64%降低到0.92%.离子液体[Ae MIM]Br能将酚醛复合材料的冲击强度由原来的0.93 k J/m2提高到6.96 k J/m2,而[Ae MIM]Br及其液化的木粉产物制备的酚醛复合材料拉伸强度从原来的3.28 MPa提高到9.70 MPa.     

The Acceleration Severity Index in the impact of a vehicle against permanent road equipment support structures

The acceleration Severity Index (ASI), described in European Standard EN12767 (The passive safety of support structures for road equipment. Requirements, classification and the test method) is regarded as the most important indicator of impact on the occupants. The requirements for experiments are described, having in mind that the results depend on many factors. One of them is the selection of a vehicle to be used in the crash test. To perform numerical vehicle crash simulation, the finite-element models of permanent road equipment support structures were developed using the LS Dyna software available. To examine the response of the vehicle upon the impact, the acceleration severity index curves were calculated and visualised in Matlab.     

Extension and application of multivariate curve resolution-alternating least squares to four-way quadrilinear data-obtained in the investigation of pollution patterns on Yamuna River,India—A case study

This study focuses on the development and extension of Multivariate Curve Resolution-Alternating Least Squares (MCR-ALS) to the analysis of four-way datasets. The proposed extension of the MCR-ALS method with non-negativity and the newly developed quadrilinear constraints can be exploited to summarize and manage huge multidimensional datasets and resolve their four way component profiles. In this study, its application is demonstrated by analyzing a four-way data set obtained in a long term environmental monitoring study (15 sampling sites × 9 variables × 12 months × 7 years) belonging to the Yamuna River, one of the most polluted rivers of India and the largest tributary of the Ganges river. MCR-ALS resolved pollution profiles described appropriately the major observed changes on pH, organic pollution, bacteriological pollution and temperature, along with their spatial and temporal distribution patterns for the studied stretch of Yamuna River. Results obtained by MCR-ALS have also been compared with those obtained by another multi-way method, PARAFAC. The methodology used in this study is completely general and it can be applied to other multi-way datasets.     

Muscle oxygenation measurement in humans by noninvasive optical spectroscopy and Locally Weighted Regression

We have developed a method to make real-time, continuous, noninvasive measurements of muscle oxygenation (Mox) from the surface of the skin. A key development was measurement in both the visible and near infrared (NIR) regions. Measurement of both oxygenated and deoxygenated myoglobin and hemoglobin resulted in a more accurate measurement of Mox than could be achieved with measurement of only the deoxygenated components, as in traditional near-infrared spectroscopy (NIRS). Using the second derivative with respect to wavelength reduced the effects of scattering on the spectra and also made oxygenated and deoxygenated forms more distinguishable from each other. Selecting spectral bands where oxygenated and deoxygenated forms absorb filtered out noise and spectral features unrelated to Mox. NIR and visible bands were scaled relative to each other in order to correct for errors introduced by normalization. Multivariate Curve Resolution (MCR) was used to estimate Mox from spectra within each data set collected from healthy subjects. A Locally Weighted Regression (LWR) model was built from calibration set spectra and associated Mox values from 20 subjects using 2562 spectra. LWR and Partial Least Squares (PLS) allow accurate measurement of Mox despite variations in skin pigment or fat layer thickness in different subjects. The method estimated Mox in five healthy subjects with an RMSE of 5.4%.