具有高斯过程误差的函数型线性模型的统计诊断

提出了具有高斯过程误差的函数型回归模型的几种诊断方法.在此模型中,首先,在样条基的基础上,推导了回归系数函数的估计.随后,证明了数据删失模型和均值漂移模型的等价性.然后,研究了三种诊断方法,即残差分析、Cook距离和似然距离来诊断异常和强影响数据.最后,通过一个模拟例子和一个实例来阐述方法的有效性.     

Polynomial and nonpolynomial spline methods for fractional sub-diffusion equations

We consider one-dimensional fractional sub-diffusion equations on an unbounded domain. For a problem of this type for which an exact or approximate artificial boundary condition is available we reduce it to an initial-boundary value problem on a bounded domain. We then analyze the numerical solution of the problem by polynomial and nonpolynomial spline methods. The consistency and the Von Neumann stability analysis of these methods are also discussed. Numerical experiments clarify the effectiveness and order of accuracy of the proposed methods.     

Hölder regularity for weak solutions to divergence form degenerate quasilinear parabolic systems

In this paper, we establish Hölder regularity of weak solutions to the diagonal divergence form degenerate quasilinear parabolic system related to Hörmander type vector fields by deriving a parabolic Poincaré inequality and the higher integrability of gradients of weak solutions.     

Stylissatin A,a cyclic peptide that inhibits nitric oxide production from the marine sponge Stylissa massa

A new cyclic heptapeptide, stylissatin A (1), was isolated from the Papua New Guinean marine sponge Stylissa massa. Through the use of 1D and 2D NMR spectroscopic analysis, Marfey’s method, and MS/MS analysis, its structure was determined to be cyclo-[Tyr¹–Ile²–Phe³–Pro⁴–Ile⁵–Pro⁶–Phe⁷]. Stylissatin A inhibited nitric oxide production in LPS-stimulated murine macrophage RAW264.7 cells with an IC₅₀ value of 87 μM.     

Modelling and optimization of rebound resilience and hardness of defatted rice bran/calcium carbonate-filled NR vulcanisates

Hardness and rebound resilience of natural rubber (NR) vulcanisates filled with defatted rice bran (DRB)/calcium carbonate (CaCO₃) were modelled and optimized. Second-order polynomial functions were generated to model the properties and to generate contour plots. Predicted properties of NR vulcanisates showed good agreement with experimental results. Hardness of filled-NR vulcanisates increased with filler loading, whereas rebound resilience decreased. At a fixed hardness level, lower CaCO₃ loading can be used with partial DRB replacement. DRB incorporation into rubber compounds can improve their stiffness. Contour plots were used to identify DRB and CaCO₃ level ranges for achieving optimum hardness and rebound resilience.     

以天然凹凸棒石为原料合成Fe/Ti-ZSM-5沸石分子筛及其催化裂化性能

以天然凹凸棒石为硅源、铁源和钛源,一步合成了Fe/Ti-ZSM-5分子筛.X射线衍射、扫描电镜和N₂吸附等温线测定结果表明,所合成的样品具有良好的结晶度和较大的比表面积;NH₃程序升温脱附和H₂程序升温还原结果表明,该样品具有强的酸性和氧化还原性能.更为重要的是,与常规方法制备的ZSM-5沸石相比,Fe/Ti-ZSM-5在催化裂解原料油(LGO,加拿大)的测试中,丙烯的产率提高0.21%,总轻烯烃的产率提高0.33%.由此可见,Fe与Ti物种在ZSM-5沸石分子筛中的存在有利于提高轻烯烃的产率,有望在石油炼制过程中提高烯烃产率.     

Investigation of radioactive lead,uranium, and thorium in environmental waters by extraction chromatography resins

A time-saving and sensitive method for monitoring low concentration (activities) of ²¹⁰Pb, ²³²Th, and ²³⁰Th and ²³⁸U, ²³⁴U, and ²³⁵U in water samples has been developed. Through the combination of co-precipitation and extraction chromatography by 3M RAD disks and UTEVA (Eichrom) columns effective radiochemical separation of the analytes was carried out. Thorium and uranium activities were determined by alpha spectrometry and lead activity by LSC, respectively. The minimal detectable activities obtained were 0.6?Bq?m^?3 for uranium, 0.29?Bq?m^?3 for thorium, and 2.5?Bq?m^?3 for ²¹⁰Pb. More than 150 different waters were analysed for uranium content and only 30 for lead and thorium. The investigations are still in progress.     

Reactivity of Thioglycolic Acid Physically and Chemically Bound to Silica Gel as New Selective Solid Phase Extractors for Removal of Heavy Metal Ions From Natural Water Samples

A method is presented for the immobilization of thioglycolic acid moiety on the surface of active silica gel via a simple and direct synthetic route and based on one step reaction procedure. Two-product solid phase extractors were successfully synthesized according to physical adsorption and chemical immobilization binding techniques, phases (I) and (II), respectively. The mode of interaction between the silanol group and the thioglycolic moiety was also discussed for both phases based on the infrared analysis studies. The thermal stability properties as well as the effect of buffer solutions on the percentage hydrolysis of the two silica gel phases were examined and revealed the high stability and superiority of silica phase (II) in these respects. The evaluation of the selectivity and metal uptake properties incorporated in these two silica gel phases were also studied and discussed for a series of divalent heavy metal ions under different controlling factors. The mmol/g values were found to be higher in case of phase (I). The selective removal and extraction of some heavy metal ions, viz . Cu(II), Zn(II), and Hg(II) from natural seawater samples was successfully accomplished with the percentage recovery values for the three tested metal ions in the range of 96.5-98.4 - 0.2-0.6%. The presence of higher concentrations of Na(I), K(I), Mg(II) and Ca(II) showed insignificant role or no matrix effect on such selective extraction process due to their 0% values of removal by these silica gel phases (I) and (II).     

Microsynthesis of Dianhydrohexitols

Abstract

Conditions have been established for the microsyntheses of dianhydro-hexitols by reaction of 1, 4-monoanhydro-D, L-galactitols and 1, 5-monoanhydro-D-galactitol as well as of 1, 4- and 1, 5-monoanhydro-D-glucitols and -D-mannitols with tosyl chloride in pyridine followed by cyclization of the resulting 6-O-tosyl derivatives in methanolic solution of sodium methoxide. The dianhydrohexitols were formed by intramolecular nucleophilic substitution of the C-6 O-tosyl group with a properly stereochemically oriented hydroxyl group.

Components of the mixtures were separated by capillary gas chromato-graphy using columns coated with SP-2340 and identified by GC-MS. The identities of the synthesized dianhydrohexitols were confirmed by comparison with the GC retention times and mass spectra of authentic samples.     

利用高压水射流技术制备天然橡胶复合材料

首先利用超声空化作用将炭黑团聚体破碎、切割、分散在水中制得炭黑悬浮液,然后在高速射流场中,炭黑悬浮液被高速射流卷吸到天然胶乳中,在射流边界,由于二者存在极大的速度差,而形成一个湍流混合层,炭黑在湍流拉伸、剪切作用下微观分散到天然胶乳中.结果表明,与传统干法工艺相比,射流工艺可以使炭黑更均匀的分散到天然橡胶基体中.Payne效应结果表明射流工艺减弱了炭黑与炭黑之间的相互作用,增强了炭黑与橡胶之间的相互作用.同时射流工艺制备的复合材料硫化时间变短,硫化程度增加,硫化胶的撕裂强度提高了78%,回弹性提高了20%,DIN磨耗减小了33%.动态力学性能结果表明,射流工艺制备的复合材料在60℃左右具有更低的损耗因子.