<Emphasis Type="Italic">Comment on</Emphasis>¶Low temperature specific heat of blue bronze K <Emphasis Type="Bold">0.30</Emphasis>MoO <Emphasis Type="Bold">3</Emphasis>, by J. Odin,J.C. Lasjaunias,K. Biljaković, K. Hasselbach,and P. Monceau

Eur. Phys. J. B 24, 315 (2001) Here we comment on a recently published paper on the presence of a phason contribution in the low temperature heat capacity data of the charge-density-wave compounds K_0.3MoO₃ and (TaSe₄)₂I. We have shown that the anomaly in the C _P / T ³ data reported by Odin et al. is straightforwardly interpreted in terms of low energy phonon modes resulting from the peculiar topology of these compounds. Received 21 February 2002 Published online 19 July 2002     

固体密度秤

根据杠杆平衡原理,使用杠杆平衡仪设计了固体密度秤.采用与液体密度计读数类似的方法,能够直接读出被测固体的密度.     

Generalized Physical and SRB Measures for Hyperbolic Diffeomorphisms

In this paper we introduce the notion of generalized physical and SRB measures. These measures naturally generalize classical physical and SRB measures to measures which are supported on invariant sets that are not necessarily attractors. We then perform a detailed case study of these measures for hyperbolic Hènon maps. For this class of systems we are able to develop a complete theory about the existence, uniqueness, finiteness, and properties of these natural measures. Moreover, we derive a classification for the existence of a measure of full dimension. We also consider general hyperbolic surface diffeomorphisms and discuss possible extensions of, as well as the differences to, the results for Hènon maps. Finally, we study the regular dependence of the dimension of the generalized physical/SRB measure on the diffeomorphism. For the proofs we apply various techniques from smooth ergodic theory including the thermodynamic formalism. 2000 Mathematics Subject Classification. Primary: 37C45, 37D20, 37D35, Secondary: 37A35, 37E30     

Surface rumpling of cubic CaTiO3 from density functional theory

In this paper, the structure of cubic CaTiO3 （001） surfaces with CaO and TiO2 terminations has been studied from density functional calculations. It has been found that the Ca atom has the largest relaxation for both kinds of terminations, and the rumpling of the CaO-terminated surface is much larger than that of TiO2-terminated surface. Also we have found that the metal atom relaxes much more prominently than the O atom does in each layer. The CaO-terminated surface is slightly more energetically favourahle than the TiO2-terminated surface from the analysis of the calculated surface energy.     

表面传导电子发射显示器件电场分布的理论研究

利用电磁理论对表面传导电子发射显示器件的单个子像素在笛卡尔坐标系内建立合理的电学物理模型，对内部电场强度和电势进行了深入研究，推导出了模型不同部分的面电荷密度、电场强度和电势的表达式.为了形象地表征其电学特性，利用MATLAB 6.5对电场强度和电势的分布情况进行了模拟，从理论上对模拟曲面给出了合理的解释，分析了子像素内部电子的发射机理和电学行为，并与电子多重散射模型和惯性离心模型进行了对比，解释了SED阳极电流形成的重要原因.在误差允许的范围内，本模型有关电场强度分布的结论与惯性离心模型一致. 关键词： 表面传导电子发射显示 遂穿效应 面电荷密度 电场强度     

Rb（5PJ）＋Rb（5PJ）→Rb（5JS）＋Rb（nl=5D，7S）碰撞能量合并

研究了Rb(5PJ)+Rb(5PJ)→Rb(nlJ')+Rb(5S)碰撞能量合并过程,利用单模半导体激光器分别共振激发Rb原子的5P1/2或5P3/2态,利用另一与泵浦激光束反向平行的单模激光束作为吸收线探测激发态原子密度及其空间分布,吸收线分别调至5P1/2→5D3/2和5P3/2→7S1/2跃迁.由激发态原子密度和谱线荧光比得到碰撞能量合并过程的截面,对5P3/2激发,碰撞转移得到5D5/2,5D3/2和7S1/2的截面分别是(1.32士0.59)×10-14,(1.18士0.53)×10-14和(3.21士1.44)×10-15cm2;对5P1/2激发,碰撞转移到5D5/2和5D3/2的截面分别是(6.57士2.96)×10-15和(5.90士2.66)×10-15cm2.与其他的实验结果进行了比较.     

光子晶体中四能级系统的量子相干效应

研究了处于光子带隙材料中的四能级原子系统的电磁感应透明、自发辐射和光子开关效应，分析了其稳态与瞬态特性, 发现特殊的模密度能够导致反常的吸收、色散、自发辐射及瞬态无反转增益, 并可以通过外加调制场进行控制.详细讨论了特殊频率处模密度的变化对透明窗口和光子开关效应的影响. 关键词： 光子带隙材料 电磁感应透明 模密度 光子开关     

Simulation of a turbulent premixed open V-shaped flame using contour advection with surgery

Despite its capability of high spatial resolution, simulation of turbulent flows with traditional Lagrangian (front tracking) scheme is often discouraged by numerical instability caused by clustering of marker nodes and topological changes of fronts. Contour advection surgery (CAS), being a robust front tracking scheme, can limit the growth of front complexity during simulation without jeopardizing accuracy or efficiency. This allows it to open up an advantage over traditional front-tracking schemes. It has already been demonstrated that CAS, with incorporation of the reaction sheet model, can accurately simulate the propagation and advection of a turbulent premixed V-shaped flame. In this study, it is further tested with 10 values of vortex circulation. A range of upstream turbulence levels of 1.8–19.8% was obtained. Results indicate that upstream turbulence increase the average flame length, flame zone area and the overall burning rate. Flame surface density Σ was also estimated. Maximum values of Σ obtained lie in the range 0.1–1.4 mm⁻¹. Skewness towards the burnt region was observed in all profiles of Σ. Similar to results from laboratory experiments, it was found that Σ values decreases with upstream turbulence. From this study, the ability of CAS to cope with intense turbulence is demonstrated and a better quantitative understanding on the scheme has also been acquired.     

Phonon density of states of ann-component alloy

We have generalized the coherent potential approximation (CPA) of Tripathi and Behera to the case of ann-component alloy. It is seen that then-component CPA density of states reproduces the binary, ternary quartenary alloys etc when the appropriate limits are adopted.     

VOn±(n=0,1,2)的势能函数与光谱常数研究

用密度泛函B3LYP/6-311++G(d,p)方法和相对论有效实势(Lanl2dz基组)对VO^n±(n=0,1,2)分子离子的势能函数及光谱常数进行了分析. 结果表明它们都能稳定存在, 其基态电子状态分别是:⁴Σ(VO^2-), ³Σ(VO^-), ⁴Σ(VO), ³Σ(VO⁺)和²Σ(VO²⁺). 其中VO^2-和VO²⁺的势能函数曲线呈“火山口”型, 属于亚稳态分子离子. 用七参数Murell-Sorbie势拟合VO^2-和VO²⁺分子亚稳态双原子分子离子势能函数, 发现其拟合曲线与势能函数曲线符合得很好. 同时,讨论了电荷对势能函数和能级的影响. 关键词： 分子离子 密度泛函理论 势能函数 能级