Thermodynamic Study of the Solid-Liquid Equilibria in the Systems MIPO3-Pr(PO3)3 (MI=Na,Rb, Cs OR Ag)

A previously established equation of a stoichiometric phase liquidus curve was applied to determination of the phase diagrams of the systems M^IPO₃-Pr(PO₃)₃ (with M^I=Na, Rb, Cs or Ag). The temperature, enthalpy and entropy of fusion were calculated for each solid phase with the exception of silver polyphosphate, the crystallization field of which was very limited. The enthalpy of fusion of the polyphosphate Pr(PO₃)₃ was determined from the DTA curve. The melting enthalpy of Pr(PO₃)₃ calculated from the different binary systems was approximately equal to the measured value. The calculated temperatures and compositions were in good agreement with those determined experimentally. This revised version was published online in July 2006 with corrections to the Cover Date.     

Pseudo-Isotherms Using a Second Order Kinetic Expression Constant

The kinetics of four sorption systems, Cu/tree fern, Pb/tree fern, AB9/activated clay and BR18/activated clay have been studied based on the assumption of a pseudo-second order rate law. Pseudo-isotherms using the pseudo-second order kinetic expression constant have been developed to describe the four liquid-solid sorption systems. The experimental results have been analyzed using a pseudo-Langmuir and a pseudo-Redlich-Peterson isotherm. Both isotherms were found to represent the measured sorption data well. According to the evaluation using the pseudo-Langmuir equation, the monolayer sorption capacities were obtained to be 13.9, 46.6, 124 and 105 mg g^–1 for copper, lead, AB9 and BR18 respectively.     

Characterization of the solid phases of paracetamol and fenamates at equilibrium in saturated solutions

Differential scanning calorimetry (DSC), supported by hot stage microscopy, IR spectroscopy and X-ray powder diffractometry, was used to investigate the characteristics of the solid phases of mefenamic, niflumic, and flufenamic acids and of paracetamol, before and after equilibration with saturated solutions in different solvents. Mixtures of Lewis base (dioxane and ethyl acetate) and amphiprotic solvents (ethanol and water) were prepared for evaluating the influence of both nature and polarity of the solvents. Solid-state analysis performed on the original samples (commercial products) made it possible to establish that paracetamol, mefenamic acid and flufenamic acid were in their respective Form I. No polymorphic modifications are known for niflumic acid. Paracetamol, niflumic and mefenamic acids did not show any change after equilibration with the various solvents or solvent mixtures, regardless of their different chemical nature. In contrast, DSC, IR and X-ray analyses revealed the partial recrystallization of flufenamic acid into its polymorphic Form III in solid phases at equilibrium with ethanol, ethyl acetate and their blends, as well as in dioxane-water mixtures containing 30 to 100% dioxane and in ethanol-water mixtures with a water content less than 50%. This revised version was published online in July 2006 with corrections to the Cover Date.     

Cationic Heteroconjugation Constants in the OHN+ and NHO+ Systems in Propylene Carbonate: Dependence on Difference in Basicity

Cationic heteroconjugation equilibria of more than ninety systems consisting of substituted pyridines, their N-oxides, and trimethylamine N-oxide, i. e., in systems with mixed hydrogen bridges of type OHN⁺ (NHO⁺) were studied in propylene carbonate. Both experimental systems without proton transfer, BH⁺/B₁, and those with proton transfer, B₁H⁺/B, were explored. The stability of the mixed hydrogen bridges, OHN⁺ (NHO⁺), is compared with that of the OHC⁺-type bridges. The influence of the difference in basicity of the conjugate base of the proton donor and the proton acceptor on the presence of the proton transfer equilibria, and, consequently, the possibility of determination of the cationic heteroconjugation constant values is discussed.     

Synthesis and Characterization of New Chelating Resin: Adsorption Study of Copper(II) and Chromium (III) Ions

Acrylamide based monomer, 5-methyl-2-thiozyl methacrylamide (MTMAAm) was synthesized by the reaction of 2-Amino-5-methyl thiazole with methacryloyl chloride in the presence of triethylamine(NR₃) at 0–5°C. The monomer MTMAAm was characterized by FT-IR and ¹H-and ¹³C-NMR spectral studies. A new chelating resin, poly(5-methyl-2-thiozyl methacrylamide-co-2-acrylamido-2-methyl-1-propanesulfonic acid-co-divinylbenzene) [MTMAAm/AMPS/DVB] was synthesized. This resin was characterized by FT-IR. In order to determine the adsorption behavior of chelating resin, the adsorption isotherm of Cr(III) and Cu(II) were studied. It was found that the adsorption isotherm of the ions fitted with Langmuir-type isotherms. From the Langmuir equation, the adsorption capacity of chelating resin for Cr(III) and Cu(II) was found to be 7.77 mg g^{? 1} and 4.27 mg g^{? 1}, respectively. Binding equilibrium constant was calculated to be 0.155 L mg^{? 1} and 0.106 L mg^{? 1} for Cu(II) and Cr(III), respectively.     

分子动力学模拟研究线型聚乙烯链在强电场中的取向行为

本文将电荷平衡法(Charge Equilibration, QEq)方法应用于线型聚乙烯链(PE)的电荷分布计算,发现了非极性高分子PE链上电荷分布具有不均匀性,且端基带有较多的负电荷,随后通过MD模拟发现PE单链可在强电场中发生取向.通过QEq方法对达到临界缠结分子量的PE多链体系进行电荷分配,并模拟其在真空和本体条件下的取向行为,发现PE多链体系在强电场中也可发生取向.最后通过分析得出PE在强电场中发生取向的可能原因是分子链上电荷分布的不均匀性.     

Quiesent Crystallization Kinetics of Nucleated Metallocene and ZN Isotactic Polypropylenes

Crystallization kinetics and thermodynamic properties of nucleated isotactic polypropylene (PP) are analyzed using Hoffman—Lauritzen crystallization theory to determine the mechanistic effects of the nucleators. Calorimetric data provides quantitative comparisons between nucleating efficiences of the (Millad) and (NJSTAR) nucleator in Metallocene (M) and Ziegler—Natta (ZN) PP. The two types of PP without nucleators showed similar crystallization behavior though the T°_m for ZN-iPP was about 10°C higher than M-iPP. Both nucleators show significant improvement in crystallization rate in both types of PP. In addition, Millad outperforms NJSTAR. The magnitude of the kinetic response is,however, different and both the nucleators appear to function better in ZN than in Metallocene PP. nucleated PP shows predominantly the form. The amount of the form is thermal history dependent and changes with supercooling (T=T°_m–T_c). Similar equilibrium melting temperature (T°_m) in the nucleated and control PPs indicates the lack of any thermodynamic effect of the nucleator. All nucleated PPs show a much lower secondary nucleation rate constant, K_g.This revised version was published online in November 2005 with corrections to the Cover Date.     

Cd（Ⅱ）与HSA或BSA的结合平衡研究

用平衡透析法详细研究了生理pH(7.43)条件下Cd(Ⅱ)与HSA或BSA的结合平衡.通过非线性最小二乘法拟合Bjerrum方程,首次报道了Cd(Ⅱ)-HSA和Cd(Ⅱ)-BSA体系的逐级稳定常数值,其K_1～K_3的数量级均为10~4;Hill系数和自由能偶合定量分析表明Cd(Ⅱ)与HSA或BSA的结合均产生在类似体系中少见的强的正协同效应,且Cd(Ⅱ)与HSA结合产生的正协同效应大于BSA;Scatchard图分析表明,Cd(Ⅱ)在HSA和BSA中均有3个强结合部位.通过Cd(Ⅱ)与Cu(Ⅱ),Zn(Ⅱ)或Ca(Ⅱ)等竞争结合HSA或BSA的结果,进一步讨论了Cd(Ⅱ)在HSA或BSA中强结合部位的可能位置和(或)配体.     

Effects of TEMED and EDTA on the structural and mechanical properties of NIPAAm/Na+MMT composite hydrogels

N‐isopropyl acrylamide (NIPAAm) hydrogels are known as thermosensitive crosslinked polymer networks. In this work, the network parameters of their composites, i.e., NIPAAm/sodium montmorillonite (NIPAAm/Na⁺MMT) hydrogels synthesized by free radical solution polymerization in the presence of two different types of accelerator (tetramethyl ethylenediamine (TEMED) and ethylenediamine tetraacetic acid (EDTA)) and initiator (potassium persulphate (K₂S₂O₈) and cerium ammonium nitrate ((NH₄)₂Ce(NO₃)₆), Ce(IV)) using five different clay content (in the range of 1.0–5.0 wt % of total monomer concentration) at 25 °C were presented and discussed. FTIR spectra, XRD patterns, SEM photographs, and network parameters of the samples indicated that the presence of COOH groups on EDTA molecules was resulted in the formation of exfoliated structures and the activity of EDTA/KPS redox pair was higher than those of TEMED/KPS and EDTA/Ce (IV) pairs. The compression moduli (G) of the hydrogels initiated with EDTA/Ce(IV) redox pair showed smooth and continual changings with increase in Na⁺MMT content (for swelling equilibrium at 25 °C) on the contrary of EDTA/KPS and TEMED/KPS pairs. It might be related to low initiator efficiency of cerium ammonium nitrate than KPS molecules, having higher effective crosslinking density with increasing clay content. On the other hand, the G moduli of NIPAAm/Na⁺MMT hydrogels (above their phase transition temperature) initiated with TEMED/KPS redox pair were higher than the others because of the more hydrophobic nature of TEMED molecules. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1256–1264, 2010     

Predicting the tautomeric equilibrium of acetylacetone in solution. I. The right answer for the wrong reason?

This study investigates how the various components (method, basis set, and treatment of solvent effects) of a theoretical approach influence the relative energies between keto and enol forms of acetylacetone, which is an important model system to study the solvent effects on chemical equilibria from experiment and theory. The computations show that the most popular density functional theory (DFT) approaches, such as B3LYP overestimate the stability of the enol form with respect to the keto form by ～10 kJ mol^?1, whereas the very promising SCS‐MP2 approach is underestimating it. MP2 calculations indicate that in particular the basis set size is crucial. The Dunning Huzinaga double ζ basis (D95z(d,p)) used in previous studies overestimates the stability of the keto form considerably as does the popular split‐valence plus polarization (SVP) basis. Bulk properties of the solvent included by continuum approaches strongly stabilize the keto form, but they are not sufficient to reproduce the reversal in stabilities measured by low‐temperature nuclear magnetic resonance experiments in freonic solvents. Enthalpic and entropic effects further stabilize the keto form, however, the reversal is only obtained if also molecular effects are taken into account. Such molecular effects seem to influence only the energy difference between the keto and the enol forms. Trends arising due to variation in the dielectric constant of the solvent result from bulk properties of the solvent, i.e., are already nicely described by continuum approaches. As such this study delivers a deep insight into the abilities of various approaches to describe solvent effects on chemical equilibria. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2010