对正负一级能量之比测量光栅参量方法的改进

提出利用同一波长的入射光在双面入射时两个能量之比的比值对光栅的参量进行测量,进一步提高准确度。首先从理论上比较正弦面形光栅在单一面入射及双面入射时各种衍射效率对光栅表面粗糙度的敏感程度;然后模拟测量出该正弦面型光栅在双面入射情况下的光栅参量;最后成功反演出体积相位全息光栅的三个参量,其测量结果为0.080μm,1.452μm,20.5μm准确度比单一入射面情况(0.080μm,1.451μm,20.1μm)时要高。同时该法继承了原来方法的无损伤、操作简便、可重复、易推广、成本低等优点。     

纤维复合材料界面横向拉伸分析

以单纤维十字型横向拉伸试验为研究对象,对纤维/基体界面采用弹性-软化双线性内聚力模型,建立了纤维复合材料在横向拉伸作用下界面法向失效过程的解析模型。得到了沿纤维/基体圆周界面的法向应力分布,纤维/基体界面的状态与界面承载力和单纤维复合材料承载力的关系,以及内聚力参数和试件几何尺寸对它们的影响。结果表明:纤维/基体圆周界面在脱粘前经历全部弹性及弹性+软化两种状态;当界面为弹性状态时,界面法向应力随界面强度线性增加;当界面为弹性+软化状态时,界面软化范围随界面裂纹萌生位移的增加而增大;界面初始脱粘位置与拉伸荷载方向重合;界面初始脱粘时的界面承载力随界面强度及界面裂纹萌生位移的增加而增加,随界面裂纹生成位移的增加而降低;单纤维复合材料的脱粘荷载受基体截面尺寸的影响,当纤维体积含量相同时,沿荷载方向截面尺寸的增大对提高脱粘荷载更显著。     

Rotational and rovibrational transitions in the a 1Δ2 and b 1Σ+0+ states of sulfur monoxide radical

ABSTRACT

Sulfur monoxide radical has widely been detected in outer space using ground-state spectroscopy. The a ¹Δ₂ and b ¹Σ⁺₀₊ states of this radical have low excitation energies, and they possibly exist in outer space. In this work, the potential energy curves and dipole moment functions of the two states were evaluated using the complete active space self- consistent field method, followed by the valence internally contracted multireference configuration interaction approach. The transition line positions, oscillator strengths, band transition dipole matrix elements, Einstein A coefficients, and Franck–Condon factors of all transitions were calculated for lower vibrational levels at rotational angular momentum quantum number J up to 150. The transition line positions calculated in this study are in good agreement with the experimental results. The rovibrational transition became noticeably weak at Δυ > 5. Comparing the results of a ¹Δ₂ and b ¹Σ⁺₀₊ states reported in this paper with the previous values, we conclude that these results are the most accurate and complete to date.     

Transition probabilities of the X1Σ+, A1Π, B1Δ, C1Σ+, and D1Π states of the AlO+ cation

ABSTRACT

This study computes the potential energy curves of the X¹Σ⁺, A¹Π, B¹Δ, C¹Σ⁺, and D¹Π states of AlO⁺ cation and the transition dipole moments between them. The orders of the rotationless radiative lifetimes are 10–100?μs for the A¹Π state, 1–1000?ms for the B¹Δ state, 10?ns for the first well and 100?ns for the second well of the C¹Σ⁺ state, and 1?μs for the D¹Π state. Emissions of the B¹Δ–A¹Π and D¹Π–C¹Σ⁺ systems are so weak that they are hardly measured via spectroscopy, the emissions of the C¹Σ⁺–X¹Σ⁺, C¹Σ⁺–A¹Π, and D¹Π–X¹Σ⁺ systems are so strong that they can be detected readily, and emissions of the A¹Π–X¹Σ⁺ and D¹Π–A¹Π systems can be observed through spectroscopy only by a significant effort. There is a strong great similarity between spontaneous emissions of the A¹Π–X¹Σ⁺ system of the AlO⁺ cation and the A²Π–X²Σ⁺ system of the AlO radical. The emissions of the A²Π–X²Σ⁺ system of the AlO radical have been measured in outer space Therefore, it is highly possible that the emissions of the A¹Π–X¹Σ⁺ system of the AlO⁺ cation can be detected in the astrophysical media.     

STRUCTURING ＆ RHEOLOGY OF MOLTEN POLYMER／CLAY NANOCOMPOSITES

The evolution and the origin of “solid-like state” in molten polymer/clay nanocomposites are studied. Using polypropylene/clay hybrid (PPCH) with sufficient maleic anhydride modified PP (PP-MA) as compatibilizer, well exfoliation yet solid-like state was achieved after annealing in molten state. Comprehensive linear viscoelasticity and non-linear rheological behaviors together with WAXD and TEM are studied on PPCH at various dispersion stages focusing on time,temperature and deformation dependencies of the “solid-like” state in molten nanocomposites. Based on these, it is revealed that the solid-structure is developed gradually along with annealing through the stages of inter-layer expansion by PP-MA,the diffusion and association of exfoliated silicate platelets, the formation of band/chain structure and, finally, a percolated clay associated network, which is responsible for the melt rigidity or solid-like state. The network will be broken down by melt frozen/crystallization and weakened at large shear or strong flow and, even more surprisingly, may be disrupted by using trace amount of silane coupling agent which may block the edge interaction of platelets. The solid-like structure causes characteristic non-linear rheological behaviors, e.g. residual stress after step shear, abnormal huge stress overshoots in step flows and, most remarkably, the negative first normal stress functions in steady shear or step flows. The rheological and structural arguments challenge the existing models of strengthened entangled polymer network by tethered polymer chains connecting clay particles or by chains in confined melts or frictional interaction among tactoids. A scheme of percolated networking of associated clay platelets, which may in band form of edge connecting exfoliated platelets, is suggested to explain previous experimental results.     

Feasibility study on qualitative and quantitative analysis in tea by near infrared spectroscopy with multivariate calibration

This study attempted the feasibility to use near infrared (NIR) spectroscopy as a rapid analysis method to qualitative and quantitative assessment of the tea quality. NIR spectroscopy with soft independent modeling of class analogy (SIMCA) method was proposed to identify rapidly tea varieties in this paper. In the experiment, four tea varieties from Longjing, Biluochun, Qihong and Tieguanyin were studied. The better results were achieved following as: the identification rate equals to 90% only for Longjing in training set; 80% only for Biluochun in test set; while, the remaining equal to 100%. A partial least squares (PLS) algorithm is used to predict the content of caffeine and total polyphenols in tea. The models are calibrated by cross-validation and the best number of PLS factors was achieved according to the lowest root mean square error of cross-validation (RMSECV). The correlation coefficients and the root mean square error of prediction (RMSEP) in the test set were used as the evaluation parameters for the models as follows: R = 0.9688, RMSEP = 0.0836% for the caffeine; R = 0.9299, RMSEP = 1.1138% for total polyphenols. The overall results demonstrate that NIR spectroscopy with multivariate calibration could be successfully applied as a rapid method not only to identify the tea varieties but also to determine simultaneously some chemical compositions contents in tea.     

Least-squares support vector machines and near infrared spectroscopy for quantification of common adulterants in powdered milk

This paper proposes the use of the least-squares support vector machine (LS-SVM) as an alternative multivariate calibration method for the simultaneous quantification of some common adulterants (starch, whey or sucrose) found in powdered milk samples, using near-infrared spectroscopy with direct measurements by diffuse reflectance. Due to the spectral differences of the three adulterants a nonlinear behavior is present when all groups of adulterants are in the same data set, making the use of linear methods such as partial least squares regression (PLSR) difficult. Excellent models were built using LS-SVM, with low prediction errors and superior performance in relation to PLSR. These results show it possible to built robust models to quantify some common adulterants in powdered milk using near-infrared spectroscopy and LS-SVM as a nonlinear multivariate calibration procedure.     

多元分辨校正模型与方法研究—无机多组份分析

系统研究了各种多元分辨校正模型、方法及其应用，以模拟体系、病态体系有态体系为对象，考察了它们的多元校正能力与多元分辨效果，给我机多组份分析态体系实例。     

通过红外光谱结合化学计量学方法研究奥克托今的合成机理

通过红外(IR)光谱在线监测醋酐法合成奥克托今(HMX)的反应过程, 采用渐进因子分析(EFA)结合多元曲线分辨-交替最小二乘法(MCR-ALS)以及直观推导式演进特征投影法(HELP)等化学计量学方法对反应过程的光谱数据矩阵进行解析, 获得了各组分浓度变化曲线和对应的IR光谱; 并采用密度泛函理论(DFT)的B3LYP方法, 在6-31G^*基组水平上得到该化合物的全优化结构, 在振动分析的基础上求得体系的振动频率和IR光谱. 通过对比发现, MCR-ALS和HELP法可得出相互验证的一致结论; 将通过量子化学计算的中间体的IR光谱特征吸收峰与2种方法进行比较, 结果吻合, 从而推导出合理的反应机理. 实验结果表明, 化学计量学方法结合在线红外光谱是研究反应机理的有效手段, 对反应路线的选择具有指导意义.     

PICVib: An accurate,fast, and simple procedure to investigate selected vibrational modes at high theoretical levels

A new approach Procedure for Investigating Categories of Vibrations (PICVib) for estimating vibrational frequencies of selected modes using only the structure and energy calculations at a more demanding computational level is presented and explored. The PICVib has an excellent performance at only a small fraction of the computational demand required for a complete analytical calculation. The errors are smaller than ca. 0.5% when DFT functionals are combined with high level ab initio methods. The approach is general because it can use any quantum chemical program and electronic structure method. It is very robust because it was validated for a wide range of frequency values (ca. 20–4800 cm^–1) and systems: XH₃ (D_3h) with X = B, Al, Ga, N, P, As, O, S, and Se, YH₄ (D_4h) with Y = C, Si, and Ge, conformers of RDX, S_N2 and E2 reactions, [W(dppe)₂(NNC₅H₁₀)] complex, carbon nanotubes, and hydrogen‐bonded complexes including guanine‐cytosine pair. © 2012 Wiley Periodicals, Inc.