Miniaturized monolithic disks for immunoadsorption of cardiac biomarkers from serum

Immunoadsorbers based on 2.0 × 6.0 mm i.d., epoxy-bearing, methacrylate-based monolithic disks were developed in order to target myoglobin and N-terminal pro-natriuretic peptide (NT-proBNP), two biomarkers involved in cardiovascular disease. In both cases, antibodies were successfully coupled to the polymeric disk material. The developed immunoadsorbers permitted the selective isolation of myoglobin and NT-proBNP from human serum. Myoglobin was successfully isolated and detected from serum samples at concentrations down to 250 fmol μL⁻¹. However, the affinity of the antibodies was not sufficient for the analysis of low-concentration clinical samples. Frontal analysis of anti-NT-proBNP disks revealed the ability of the immunoadsorber to bind up to 250 pmol NT-proBNP, which is more than sufficient for the analysis of clinical samples. Anti-NT-proBNP disks showed good stability over more than 18 months and excellent batch-to-batch reproducibility. Moreover, anti-NT-proBNP disks permitted the isolation of NT-proBNP at concentrations down to 750 amol μL⁻¹ in serum, corresponding to concentrations of strongly diseased patients. Using reversed-phase trapping columns, the detection of NT-proBNP eluted from immunoadsorbers by mass spectrometry was achieved for concentrations down to 7.8 fmol μL⁻¹.     

健脾八珍颗粒的研制

为筛选出最佳的健脾八珍颗粒处方,以其成型性、溶解性为筛选指标,筛选出处方中加入辅料的品种及配比。结果表明,健脾八珍颗粒的原粉中加入2倍量的糊精和25%的蔗糖,并以2%的CMC-Na作为助悬剂、15%的自制变性淀粉胶(SWJ)为黏合剂为最佳处方。所得产品溶解性、成型性能均较好。     

一体化教学模式在涂料配方设计课程中的应用

介绍了高职背景下涂料配方设计课程的开展过程。采用一体化教学模式,从高职学生的特点入手剖析课程,使用课堂讨论、引发、对比等多种教学方法,使涂料配方设计课程的讲授取得了更好的教学效果。     

Preparation and Porous Property of C14-Monolithic Column for Capillary Electrochromatography

Capillary electrochromatography (CEC) has been performed with a series of C₁₄, methlyacrylamide based monolithic columns. These monoliths with different porosities were prepared by in-situ copolymerization in fused-silica capillaries. The porous properties of monoliths were further observed using scanning electron micrographs (SEM) and measured using a mercury porosimeter. The effect of various alcohols as porogens on porous structural properties and chromatographic behaviors were also investigated. The effects of organic additive, pH value and ionic strength in mobile phase on electroosmosis flow (EOF) and separation were further discussed. Meanwhile, the baseline separation of 6 neutral compounds can be well obtained. In addition, the monolithic column demonstrates the high column efficiency and satisfactory reproducibility.Acknowledgements We gratefully acknowledge the support of the National Natural Science Foundation of China.     

Detection of processed genetically modified food using CIM monolithic columns for DNA isolation

The availability of sufficient quantities of DNA of adequate quality is crucial in polymerase chain reaction (PCR)-based methods for genetically modified food detection. In this work, the suitability of anion-exchange CIM (Convective Interaction Media; BIA Separations, Ljubljana, Slovenia) monolithic columns for isolation of DNA from food was studied. Maize and its derivates corn meal and thermally pretreated corn meal were chosen as model food. Two commercially available CIM disk columns were tested: DEAE (diethylaminoethyl) and QA (quaternary amine). Preliminary separations were performed with standard solution of salmon DNA at different pH values and different NaCl concentrations in mobile phase. DEAE groups and pH 8 were chosen for further isolations of DNA from a complex matrix-food extract. The quality and quantity of isolated DNA were tested on agarose gel electrophoresis, with UV-scanning spectrophotometry, and by amplification with real-time PCR. DNA isolated in this way was of suitable quality for further PCR analyses. The described method is also applicable for DNA isolation from processed foods with decreased DNA content. Furthermore, it is more effective and less time-consuming in comparison with the existing proposed methods for isolation of DNA from plant-derived foods.     

Octyl-type monolithic columns of 530 microm i.d. for capillary liquid chromatography

A novel monolithic capillary column (530 microm i.d.) was prepared for capillary liquid chromatography (CLC) by in situ copolymerization of octyl methacrylate (MAOE) and ethylene dimethacrylate (EDMA) in the presence of a porogen solvent containing 1-propanol, 1,4-butanediol, and water with azobisisobutyronitrile as the initiator. The influences of the contents of the porogen solvent, EDMA and the various concentration ratios of 1-propanol to 1,4-butanediol in the polymerization mixture on the morphology, porosity, globule size, stability and column efficiency were investigated. The morphology and pore size distribution of monolithic capillary columns were characterized by SEM and mercury intrusion porosimetry, respectively. Chromatographic evaluations of the columns were performed under CLC mode. The results showed that good permeability and stability can be obtained under optimal experimental conditions. The separation results of some acid, neutral and basic analytes demonstrated the hydrophobicity and low affinity to basic analytes of the new column. Three metal ions, i.e. Mg(II), Zn(II) and Cd(II) were also separated under ion-pair mode on the new monolithic capillary column and the results were acceptable.     

Chiral separations by capillary electromigration techniques in nonaqueous media. II. Enantioselective nonaqueous capillary electrochromatography

A review on the advantages, peculiarities, and the potential of enantioselective capillary electrochromatography (CEC) in nonaqueous media is presented. Some fundamentals on CEC with particular focus on enantioselective CEC are discussed. The strategies, concepts, preferentially utilized chiral selectors and column technologies that have been utilized to succeed in highly efficient enantiomer separations by nonaqueous CEC are described thoroughly.     

Anionic groups on cellulosic fiber surfaces investigated by XPS, FTIR-ATR, and different sorption methods

Anionic groups (AGs) on different cellulosic fiber surfaces were investigated by methylene blue (MB) and polyelectrolyte (PE) sorption, X-ray photoelectron spectroscopy (XPS), and total attenuated reflectance infrared spectrometry (FTIR-ATR). The MB sorption isotherms fitted well the Langmuir equation that gave consistent estimations of sorption capacities. FTIR-ATR showed that MB molecules had extensive accessibility to the fiber wall pores. Estimation of surface AGs by PE sorption gave much higher values than a new method combining MB sorption and XPS measurements (MB-XPS). The surface AGs in different cellulosic fibers accounted for 1-3% of the total AG content as revealed by MB-XPS. It was suggested that PE molecules can penetrate the fiber wall and form loops or unattached segments at external fiber surfaces that disrupt the PE sorption stoichiometry. The competition of MB and PE for the anionic sites in papermaking was assessed and it was shown that MB ions have a much stronger affinity to AGs than PE molecules.     

Determination of selected neurotransmitter metabolites using monolithic column chromatography coupled with chemiluminescence detection

The oxidation of selected clinically important neurotransmitter metabolites with acidic potassium permanganate in the presence of polyphosphates evokes chemiluminescence of sufficient intensity to enable the sensitive determination of these species. Limits of detection for 5-hydroxyindole-3-acetic acid (5-HIAA), vanilmandelic acid (VMA; α,4-dihydroxy-3-methoxybenzeneacetic acid), 4-hydroxy-3-methoxyphenylglycol (MHPG), homovanillic acid (HVA, 4-hydroxy-3-methoxyphenylacetic acid) and 3,4-dihydroxyphenylacetic acid (DOPAC) were between 5 × 10⁻⁹ and 4 × 10⁻⁸ M, using flow-injection analysis methodology. In addition, we demonstrate the rapid determination of homovanillic acid and 5-hydroxyindole-3-acetic acid in human urine - without the need for extraction procedures - using monolithic column chromatography with chemiluminescence detection.     

高效液相色谱整体柱技术的进展

高效液相色谱整体柱（又名连续床）具有制备相对简单、原料易得以及聚合组分在一定范围内可调节的优点,是近年来得到迅速发展的新型色谱柱。本文综述了目前高效液相色谱（HPLC）制备整体柱的典型高聚物体系、制备各种整体柱时反应条件的影响,并简要介绍了它的表征方法和应用。