Preparation and evaluation of a novel molecularly imprinted SPE monolithic capillary column for the determination of auramine O in shrimp

A novel method combining molecular imprinting and SPE was developed in a capillary column for the determination of auramine O in shrimp. The capillary monolithic column was prepared by UV‐initiated in situ polymerization, using auramine O as template and methacrylic acid and ethylene dimethacrylate as functional monomer and cross‐linker, respectively. The properties of the prepared capillary monolithic column were investigated under the optimized conditions coupled with HPLC, and then the morphologies of the inner polymers were characterized by SEM. The calibration curve was expressed as A = 103C + 19.8 (r = 0.9992) with a linear range of 0.25–25.0 μg/mL, and the recoveries of auramine O at different concentrations in shrimp ranged from 90.5 to 92.4% with RSDs ranging from 2.1 to 4.4%. The capacities of the molecularly imprinted polymer and nonimprinted polymer columns were 0.722 and 0.147 μg/mg, respectively, and the LOD (S/N = 3) of auramine O in shrimp was 17.85 μg/kg. Under the selected conditions, the enrichment factors obtained were higher than 70‐fold. The results indicate that the prepared molecularly imprinted capillary monolithic column was reliable and applicable to the analysis of auramine O in shrimp.     

Simultaneous determination of theophylline,tolbutamide, mephenytoin,debrisoquin, and dapsone in human plasma using high‐speed gradient liquid chromatography/tandem mass spectrometry on a silica‐based monolithic column

Theophylline, tolbutamide, mephenytoin, debrisoquin, and dapsone are marker substrates for CYP1A2, CYP2C9, CYP2C19, CYP2D6, and CYP3A4, respectively. A silica‐based monolithic column (Chromolith SpeedROD RP‐18e, 50×4.6 mm) was used to separate these five marker substrates of cytochrome P450 within only 84 s. Linear gradient elution was from acetonitrile‐water‐formic acid (10 : 90 : 1, v/v/v) to acetonitrile‐water‐formic acid (90 : 10 : 1, v/v/v) in 1.4 min. The flow rate was 2.5 mL/min. The retention time was 0.52 min for theophylline, 0.67 min for debrisoquin, 0.78 min for dapsone, 0.96 min for mephenytoin, and 1.13 min for tolbutamide. Detection was by tandem mass spectrometry using a PE Sciex API 3000 mass spectrometer with a Turbo‐Ionspray source in positive mode. A simple protein precipitation method was used. This method was validated over the concentration range of 5–2000 ng/mL based on the sample volume of 0.1 mL.     

Development of a Sensor Based on Modified Carbon Paste with Com Iron(III) Protoporphyrin Immobilized on SiNbZn Silica Matrix for L‐tryptophan Determination

In this work, SiO₂/Nb₂O₅/ZnO prepared by the sol‐gel processing method was used as substrate base for immobilization of the protoporphyrin‐IX ion. Iron(III) ion was inserted into the porphyrin ring (SiNbZn‐PPFe). A simple square wave voltammetry method based on a composite sensor carbon paste electrode of this material,designed as EPC‐SiNbZn‐PPFe, was developed and validated successfully for the determination of L‐tryptophan (Trp). The optimum conditions were obtained by using sensor modified with 18.00 mg SiNbZn‐PPFe material, 12.00 mg graphite powder and 6.0 μL mineral oil and phosphate buffer 0.3 mol L⁻¹ pH 7.0. The sensitivity of the sensor was found to be 0.523 AL mol ⁻¹, linear range from 10 to 70 μmol L⁻¹ and limit of detection of 3.28 μmol L⁻¹. Therefore, the developed method was successfully applied for the Trp determination in real samples of pharmaceutical formulation and can be used for routine quality control pharmaceutical formulations containing Trp.     

高效液相色谱整体柱技术的进展

高效液相色谱整体柱（又名连续床）具有制备相对简单、原料易得以及聚合组分在一定范围内可调节的优点,是近年来得到迅速发展的新型色谱柱。本文综述了目前高效液相色谱（HPLC）制备整体柱的典型高聚物体系、制备各种整体柱时反应条件的影响,并简要介绍了它的表征方法和应用。     

Honeycomb-shaped PtSnNa/γ-Al2O3/cordierite monolithic catalyst with improved stability and selectivity for propane dehydrogenation

A novel honeycomb-shaped PtSnNa/γ-Al₂O₃/cordierite monolithic catalyst was developed. It was found that, the unique structure of the material led to the improved catalyst performances versus the conventional granule catalyst.     

Simultaneous quantitation of rosuvastatin and ezetimibe in human plasma by LC–MS/MS: Pharmacokinetic study of fixed‐dose formulation and separate tablets

A simple, high‐throughput and highly sensitive liquid chromatography coupled with tandem mass spectrometry (LC–MS/MS) method has been developed for the simultaneous estimation of rosuvastatin and free ezetimibe. Liquid–liquid extraction was carried out using methyl‐tert butyl ether after prior acidification from 300 μL human plasma. The recovery for both the analytes and their deuterated internal standards (ISs) ranged from 95.7 to 99.8%. Rosuvastatin and ezetimibe were separated on Symmetry C₁₈ column using acetonitrile and ammonium formate buffer, pH 3.5 (30:70, v/v) as the mobile phase. The analytes were well resolved with a resolution factor of 3.8. Detection and quantitation were performed under multiple reaction monitoring using ESI(+) for rosuvastatin (m/z 482.0 → 258.1) and ESI(−) for ezetimibe (m/z 407.9 → 271.1). A linear response function was established in the concentration ranges of 0.05–50.0 ng/mL and 0.01–10.0 ng/mL for rosuvastatin and ezetimibe, respectively, with correlation coefficient, r² ≥ 0.9991. The IS‐normalized matrix factors for the analytes ranged from 0.963 to 1.023. The developed method was successfully used to compare the pharmacokinetics of a fixed‐dose combination tablet of rosuvastatin‐ezetimibe and co‐administered rosuvastatin and ezetimibe as separate tablets to 24 healthy subjects. The reliability of the assay was also assessed by reanalysis of 115 subject samples.     

块状TiO2气凝胶的制备及其表征

随着以溶胶-凝胶法和超临界干燥技术为基础的气凝胶制备方法的逐步完善,已不断制备出多种气凝胶[1～3].由于TiO2具有半导体特性,它常被作为光催化剂而受到重视,但是TiO2气凝胶的结构强度远比SiO2气凝胶小,在制备过程中极易碎裂粉化,所以至今未见制备块状TiO2气凝胶的报道.Dagan等[4]曾用异钛酸丁酯为母体制得TiO2气凝胶,并发现水杨酸在TiO2气凝胶存在下的光解速率是一般TiO2粉末的10倍,但获得的仅为TiO2气凝胶粉末.张敬畅等[5]以无机盐为原料,采用溶胶-凝胶法结合超临界干燥技术制备了纳米级TiO2气凝胶,也未能得到块状TiO2气凝胶材料. 本文报道以正钛酸丁酯为原料制备块状TiO2气凝胶的方法,并用TEM,SEM,XRD和IR等手段对所获得的气凝胶进行了结构表征.     

Application of the fractional factorial design in multiple W/O/W emulsions

In presented research, multiple W/O/W emulsions were developed by using experimental design method. A 24-1 fractional factorial design was performed by varying the following input parameters: primary polymeric emulsifier (PEG 30-dipolyhydroxystearate) concentration (0.8% and 2.4%), secondary polymeric emulsifier (Poloxamer 407) concentration (0.8% and 1.2%), electrolyte magnesium sulfate heptahydrate (0.08% and 0.4%) and electrolyte sodium chloride (0.08% and 0.4%). Multiple emulsions were prepared by a two-step emulsification process. Obtained emulsions were characterized with rheological measurements, conductivity and centrifugation tests. Factorial analysis revealed that the concentration of the primary emulsifier was the predominant factor influencing the phase separation, conductivity and maximal apparent viscosity. Additionally, electrolyte magnesium sulfate heptahydrate was more efficient in stabilizing these systems, compared to sodium chloride. The applied fractional factorial design method enabled determination of the optimal concentrations of the primary and secondary emulsifier, as well as the concentration of electrolytes, in order to obtain W/O/W emulsions with desired maximal apparent viscosities, low values of conductivity and without phase separation after centrifugation.     

A New Variational Formulation for a Kind of Reaction-diffusion Problem in Broken Sob olev Space

In this paper, a new variational formulation for a reaction-diffusion problem in broken Sobolev space is proposed. And the new formulation in the broken Sobolev space will be proved that it is well-posed and equivalent to the standard Galerkin variational formulation. The method will be helpful to easily solve the original partial differential equation numerically. And the method is novel and interesting, which can be used to deal with some complicated problem, such as the low regularity problem, the differential-integral problem and so on.     

Improved lower bounds for the Split Delivery Vehicle Routing Problem

This paper presents an algorithm to obtain lower bounds for the Split Delivery Vehicle Routing Problem. An extended formulation over a large set of variables is provided and valid inequalities are identified. The algorithm combined column and cut generation and improved the best known lower bounds for all instances from the literature. Some reasonably sized instances are solved to optimality for the first time.