Comparison between adsorption isotherm determination techniques and overloaded band profiles on four batches of monolithic columns

The adsorption isotherms of 4-tert.-butyl phenol were measured on four different monolithic columns, using three different techniques, classical frontal analysis (FA), the perturbation on a plateau method (PP) and the recently introduced numerical procedure known as the inverse numerical method (IN). This last approach requires only the recording of a few overloaded profiles and has the potential advantage of affording a dramatic decrease of the amounts of compounds, solvent, and time needed to determine accurate estimates of the coefficients of the isotherm. The reproducibility of the adsorption data measured on the four columns is discussed with reference to the specific techniques used for obtaining these data and to the most suitable equation used for modeling them. The data obtained for the different columns were highly consistent. The inverse numerical approach was confirmed to provide a powerful, accurate, and economic method for measuring single component adsorption data.     

配糖蛋白B肠溶微胶囊的研究

采用双乳液法研制配糖蛋白Ｂ的肠溶微胶囊，考察了微胶囊的形态、粒径及其分布，在摸拟肠液的缓冲液中进行溶解释放试验。配制了两种口服微胶囊混悬制剂，并考察了它的稳定性。     

On the mathematical formulation and interpretation of LACO MO theory

The mathematical basis of LCAO MO theory is studied, both within the Hartree-Fock approximation and in more exact formulations. The basic LCAO expansion for molecular orbitals ¦> in terms of atomic orbitals ¦x> is conveniently written ¦> = ¦x> S ^–1 B where S is the overlap matrix for atomic orbitals and B is the matrix of atomic orbital-molecular orbital overlaps. It is suggested that matrices P and Q, defined by P=B B and Q=BnB where n is the matrix of molecular orbital occupation numbers, are appropriate to the interpretation of molecular calculations in terms of atomic orbital components, electronic populations and the degree of bonding. Implications for Hartree-Fock calculations are investigated.     

Simultaneous determination of theophylline,tolbutamide, mephenytoin,debrisoquin, and dapsone in human plasma using high‐speed gradient liquid chromatography/tandem mass spectrometry on a silica‐based monolithic column

Theophylline, tolbutamide, mephenytoin, debrisoquin, and dapsone are marker substrates for CYP1A2, CYP2C9, CYP2C19, CYP2D6, and CYP3A4, respectively. A silica‐based monolithic column (Chromolith SpeedROD RP‐18e, 50×4.6 mm) was used to separate these five marker substrates of cytochrome P450 within only 84 s. Linear gradient elution was from acetonitrile‐water‐formic acid (10 : 90 : 1, v/v/v) to acetonitrile‐water‐formic acid (90 : 10 : 1, v/v/v) in 1.4 min. The flow rate was 2.5 mL/min. The retention time was 0.52 min for theophylline, 0.67 min for debrisoquin, 0.78 min for dapsone, 0.96 min for mephenytoin, and 1.13 min for tolbutamide. Detection was by tandem mass spectrometry using a PE Sciex API 3000 mass spectrometer with a Turbo‐Ionspray source in positive mode. A simple protein precipitation method was used. This method was validated over the concentration range of 5–2000 ng/mL based on the sample volume of 0.1 mL.     

Determination of selected neurotransmitter metabolites using monolithic column chromatography coupled with chemiluminescence detection

The oxidation of selected clinically important neurotransmitter metabolites with acidic potassium permanganate in the presence of polyphosphates evokes chemiluminescence of sufficient intensity to enable the sensitive determination of these species. Limits of detection for 5-hydroxyindole-3-acetic acid (5-HIAA), vanilmandelic acid (VMA; α,4-dihydroxy-3-methoxybenzeneacetic acid), 4-hydroxy-3-methoxyphenylglycol (MHPG), homovanillic acid (HVA, 4-hydroxy-3-methoxyphenylacetic acid) and 3,4-dihydroxyphenylacetic acid (DOPAC) were between 5 × 10⁻⁹ and 4 × 10⁻⁸ M, using flow-injection analysis methodology. In addition, we demonstrate the rapid determination of homovanillic acid and 5-hydroxyindole-3-acetic acid in human urine - without the need for extraction procedures - using monolithic column chromatography with chemiluminescence detection.     

Preparation and Porous Property of C14-Monolithic Column for Capillary Electrochromatography

Capillary electrochromatography (CEC) has been performed with a series of C₁₄, methlyacrylamide based monolithic columns. These monoliths with different porosities were prepared by in-situ copolymerization in fused-silica capillaries. The porous properties of monoliths were further observed using scanning electron micrographs (SEM) and measured using a mercury porosimeter. The effect of various alcohols as porogens on porous structural properties and chromatographic behaviors were also investigated. The effects of organic additive, pH value and ionic strength in mobile phase on electroosmosis flow (EOF) and separation were further discussed. Meanwhile, the baseline separation of 6 neutral compounds can be well obtained. In addition, the monolithic column demonstrates the high column efficiency and satisfactory reproducibility.Acknowledgements We gratefully acknowledge the support of the National Natural Science Foundation of China.     

Development of a formulation of Pirodavir using 2-hydroxypropyl-β-cyclodextrin

Pirodavir, 4-[2-[1-(6-Methyl-3-pyridazinyl)-4-piperidinyl]ethoxy]benzoic acid ethyl ester, is an antiviral compound which has low aqueous solubility (<0.01 mg/ml). The compound is a weak base (pKa 5.8) with high lipophicity (logP 4.44). Ionization of the compound increases the solubility in acidic medium to 2.3 mg/ml at pH 2.4. However, a low pH is not acceptable for nasal application as this would induce irritation. Extensive solubility studies were performed using different types of substituted cyclodextrins in order to select an appropriate derivate capable of increasing solubility to an acceptable level for formulations for nasal application. Aqueous solubility of pirodavir increased in a linear fashion with increasing concentration of most of the substituted cyclodextrins. However, using 2-hydropropyl-β-cyclodextrin (HPBCD) the solubility increased in a non-linear fashion. Based on these studies HPBCD was selected as the most appropriate excipient. To support a clinical study on the treatment of rhinovirus cold by intranasal Pirodavir formulations were developed containing up to 5 mg/ml of pirodavir and up to 10% of HPBCD. Stability of the formulations was studied and found to be acceptable.     

Validation and application of a high-performance liquid chromatography/tandem mass spectrometry assay for sumatriptan in human plasma

A sensitive and convenient high-performance liquid chromatography-tandem mass spectrometry(HPLC-MS/MS) assay is described for the (5-HT(lB/lD)) receptor agonist sumatriptan in human plasma. Sumatriptan was recovered from plasma (81.8 +/- 6.8%) by liquid-liquid extraction. The mobile phase flow rate was 0.3 mL/min and consisted of methanol:water:formic acid (90:10:0.1, v/v/v). The analytical column (4.6 x 100 mm) was packed with Partisil C(8) (5 micro m). The standard curve was linear from 0.7 to 70.4 ng/mL (r(2) > 0.99). The lower limit of quantitation was 0.7 ng/mL. The assay was specific, accurate (percentage deviation from nominal concentrations were <15%), precise and reproducible (within- and between-day coefficients of variation <10.3%). Sumatriptan in plasma was stable over three freeze/thaw cycles and at room temperature for one day. The utility of the assay was demonstrated by following sumatriptan plasma concentrations in two healthy subjects for 8-12 h following a single 20 mg intranasal dose.     

Application of microcalorimetry to the formulation study

Isothermal microcalorimetry was used to evaluate excipient compatibility of solid dosage form. Oxybutynin hydrochloride and cefaclor were used as model drugs for compatibility test with excipients. The calorimetric data for compatibility test were compared with those of HPLC data. Evaluation of compatibility between drug and excipient of solid dosage form might be possible to use isothermal microcalorimetry instead of conventional method. By using microcalorimetric method, the evaluation of the compatibility between drug and excipient could be successfully performed with a simple operation in a short time. The application of the isothermal microcalorimetry would be useful for the screening test of the drug compatibility with excipients.     

Preparation and evaluation of a large-volume radial flow monolithic column

In this study, a 38 mL monolith with homogeneous porous structure was produced by a single polymerization from glycidyl methacrylate (GMA) and ethylene dimethacrylate (EDMA) in the presence of porogens and an initiator. The uniform temperature distribution within the reaction system was achieved by adding reactant mixture continuously and enhancing the heat transfer ability of the polymerization system. Homogeneous porous structure in the monolith was proved by SEM and the pore size distribution profiles measured by mercury intrusion porosimetry. Experimental results from proteins separation indicated that the dynamic capacity and resolution of radial flow monolithic column were independent of flow rates. Furthermore, the pressure drop on the column was linearly dependent on the flow rate and did not exceed 1.7 MPa even at a flow rate of 50 mL/min, which proved that the prepared monolith could be used in the quick separation and preparation of biopolymers.