硅钨杂多酸与牛血红蛋白相互作用的研究

多金属氧酸盐作为抗艾滋病病毒、抗流感病毒和抗肿瘤的药物,引起了人们对多金属氧酸与蛋白质之间相互作用的极大关注。蛋白质空间结构的任何变化引起的构象变化都意味着蛋白质分子的活性改变,因此,蛋白质与内源性化合物及许多药物分子之间相互作用的研究一直受到人们关注[1￣3]。血红蛋白是动物及人体内执行输氧任务的蛋白质,是生命机体进行各种生理活动的主要承担者。血红蛋白分子中每条α链和β链含有的色氨酸(Trp)残基分别为α-14Trp、β-15Trp、β-37Trp。Alpert[4]等认为位于疏水腔内的β-37Trp是血红蛋白内源荧光的主要来源,同时β…     

A new study of the enzymatic hydrolysis of carboxymethyl cellulose with a bulk acoustic wave sensor

A new bulk acoustic wave (BAW) cellulase sensing technique, which is based on the enzymatic hydrolysis process of sodium carboxymethylcellulose (CMC) by cellulase, was established. The frequency shift curves of BAW sensor indicated that the viscosity of the tested solutions decreased during the hydrolysis process. The hydrolysis rate of CMC by cellulase was calculated from the frequency shift curves. The hydrolysis rate of CMC under different pH conditions at 30°C showed that cellulase had high hydrolysis ability approximately at pH 5.0. Kinetic parameters (the Michaelis constant K_m and the maximum rate V_max) of the process were estimated by using a linear method of Lineweaver–Burk plot. K_m is 1.95±0.25 mg ml⁻¹ and V_max is −(4.25±0.58)×10⁻³ g^1/2 cm^−3/2 cP^1/2 min⁻¹. Also the activation energy (E_a) of the enzymatic hydrolysis, with a value of 51.99±1.26 kJ mol⁻¹, was estimated in this work.     

Improvement of the Pd/Al2O3 Catalyst by the Control of the Sol-Gel Preparative Parameters

In this work, the metal dispersion of the Pd/Al₂O₃ catalyst prepared by sol-gel method is improved by an adequate optimisation of the preparative variables. First, the gelation temperature and the ageing time are selected, in order to avoid the reduction of the metal precursor (palladium acetylacetonate, Pd(acac)₂) by the solvent (sec-butanol, sB). The metal sintering effect on the catalysts treated in oxygen at 500°C is then minimized when the alumina pore size is controlled by the variation of the alumium alkoxide (AsB) concentration and the acetic acid amount ([AcA]/[AsB]). The appearance of new palladium particles on the alumina surface and the matching between the particle diameters and the pore sizes were also effective for the metallic surface area improvement on the samples treated in oxygen at 800°C. Compared to the reference catalysts, the higher metal dispersion obtained on the sol-gel ones was the determinant factor for their higher catalytic activity in methane combustion.     

Initial data truncation for multivariate output of discrete-event simulations using the Kalman filter

Data truncation is a commonly accepted method of dealing with initialization bias in discrete-event simulation. An algorithm for determining the appropriate initial-data truncation point for multivariate output is proposed. The technique entails averaging across independent replications and estimating a steady-state output model in a state-space framework. A Bayesian technique called Multiple Model Adaptive Estimation (MMAE) is applied to compute a time varying estimate of the output's steady-state mean vector. This MMAE implementation features the use, in paralle, of a bank of Kalman filters. Each filter is constructed under a different assumption concerning the output's steady-state mean vector. One of the filters assumes that the steady-state mean vector is accurately reflected by an estimate, called the assumed steady-state mean vector, taken from the last half of the simulation data. As the filters process the output through the effective transient, this particular filter becomes more likely (in a Bayesian sense) to be the best filter to represent the data and the MMAE mean estimator is influenced increasingly towards the assumed steady-state mean vector. The estimated truncation point is selected when a norm of the MMAE mean vector estimate is within a small tolerance of the assumed steady-state mean vector. A Monte Carlo analysis using data from simulations of open and closed queueing models is used to evaluate the technique. The evaluation criteria include the ability to construct accurate and reliable confidence regions for the mean response vector based on the truncated sequences.     

An Arithmetic Reduction of Finite Rank 3 Geometries with Linear Spaces as Plane Residues and with Dual Linear Spaces as Point Residues

Let be a rank three incidence geometry of points, lines and planes whose planes are linear spaces and whose point residues are dual linear spaces (notice that we do not require anything on the line residues). We assume that the residual linear spaces of belong to a natural class of finite linear spaces, namely those linear spaces whose full automorphism group acts flag-transitively and whose orders are polynomial functions of some prime number. This class consists of six families of linear spaces. In the amalgamation of two such linear spaces imposes an equality on their orders leading, in particular, to a series of diophantine equations, the solutions of which provide a reduction theorem on the possible amalgams of linear spaces that can occur in .We prove that one of the following holds (up to a permutation of the words point and plane):A) the planes of and the dual of the point residues belong to the same family and have the same orders,B) the diagram of is in one of six families,C) the diagram of belongs to a list of seven sporadic cases.Finally, we consider the particular case where the line residues of are generalized digons.     

Intermolecular contact interactions and their temperature dependence

A model, based on inverse gas chromatography experiments, has been developed for intermolecular interaction and its temperature dependence. The model ascribes to each substance a four-component solubility parameter; the four components reflect the van der Waals, polar, electron donor, and electron acceptor interactive properties. Their values depend on temperature in the same manner as does the cohesive energy. The latter was found to depend only on the critical temperature, the acentric factor, and the reduced temperature. The model was used for evaluation of the solubility parameters from polymer-solvent interaction coefficients and their temperature dependence with high accuracy. For binary solventsolvent mixtures, the free energy of mixing and its temperature dependence, as well as enthalpy of mixing can be derived from this model with a good accuracy.     

Volumetric studies and thermodynamics of viscous flow of hydroxamic acids in acetone + water solvent at temperatures 303.15 and 313.15 K

Densities ρ and viscosities η of two hydroxamic acids, N-phenyl-2-chlorobenzo- and N-o-tolyl-4-chlorobenzo-, have been determined as a function of their concentration in aqueous acetone solution at temperatures 303.15 and 313.15 K. Apparent molar volumes, standard-state partial molar volumes and relative viscosities have been calculated. The viscosity data have been analyzed using Jones-Dole equation. The activation thermodynamic parameters of viscous flow have been evaluated using Feakins equation. These were obtained to throw light on the mechanism of viscous flow. Thermodynamic interactions in solutions have been studied in terms of a number of excess functions calculated from the experimental data. The effect of hydroxamic acid concentration and temperature on these parameters has been discussed. The results were interpreted in the light of solute-solvent interactions in aquo-organic media.     

稀土元素在钢中的热力学参数及应用

综合报道了通过采用几种不同的高温金属溶液实验方法，研究所得到的稀土元素在金属溶液冶炼温度范围内分别与硫、氧、氧 硫、碳、氮、低熔点铜、磷、钛、铌、钒等重要元素相互作用规律及有关的一系列热力学参数和温度函数式，并简要地讨论了这些热力学参数在含稀土钢中的应用。     

Evaluation of the limit of performance of an analytical method based on a statistical calculation of its critical concentrations according to ISO standard 11843: Application to routine control of banned veterinary drug residues in food according to European Decision 657/2002/EC

Traceability of the measurement of analytical parameters capable of evaluating the performance of methods is an important concept for the assessment of quality for the routine control, especially for residue monitoring of non-authorized medicinal substances in food from animal origin. The European Decision no. 657/2002/EC recommends to calculate two statistical limits, CCα and CCβ, which allow to evaluate the critical concentrations above which the method reliably distinguish and quantify a substance taking into account the variability of the method and the statistical risk to take a wrong decision. The calculation, which can be derived from the ISO standard no. 11843 is applied on a routine basis. An example displays a very simple way for evaluating the performance of an LC-MSMS method which has been validated a few years ago and is qualified onto a Micromass Quattro LCZ tandem mass spectrometer to monitor and confirm the nitrofuran metabolite residues in food from animal origin. Community Reference Laboratory for Antimicrobial Veterinary Drug Residue Control in Food from Animal Origin