Studies on Colloidal Properties of Mixed Metal Hydroxide－Clay Aqueous Suspension

ＳｔｕｄｉｅｓｏｎＣｏｌｌｏｉｄａｌＰｒｏｐｅｒｔｉｅｓｏｆＭｉｘｅｄＭｅｔａｌＨｙｄｒｏｘｉｄｅ－ＣｌａｙＡｑｕｅｏｕｓＳｕｓｐｅｎｓｉｏｎＮＯＵｗａｎ－ｇｕｏ；ＺＨＡＮＧＣｈｕｎ－ｇｕａｎｇ；ＳＵＮＤｅ－ｊｕｎ；ＨＡＮＳｈｕ－ｈｕａａｎｄＷＡＮＧ...     

Mixed ligand complexes of β-diketonates: synthesis,characterization, and FAB mass spectral analysis

Complexes of the type MLL′ · nB (where M = Ni(II) and Cu(II); LH and L′H = 2,4-pentanedione (acacH), 1-phenyl-1,3-butanedione (bacH), and 1,3-diphenyl-1,3-propanedione (dbmH); n = 0 to 2 and B = water or pyridine) have been synthesized and characterized. IR spectra are consistent with uninegative bidentate ligands. Magnetic moments and electronic spectral studies reveal high-spin octahedral geometry for nickel(II) complexes and distorted octahedral stereochemistry for copper(II) complexes. Frozen chloroform solution ESR spectra of the copper(II) complexes display significant Jahn–Teller distortion and dimeric behavior of the complexes in solution. FAB mass spectra of the copper(II) complexes also exhibit peaks corresponding to dimers. Molecular, pseudo-molecular, dimeric pseudo-molecular, and fragment ion peaks in unit resolution mass spectra have been identified with the help of their isotope distribution pattern expected due to natural abundances of the ⁶³Cu and ⁶⁵Cu isotopes. All the FAB mass spectral peaks from the fragment ions containing copper have been interpreted on the basis of isotope distribution pattern.     

Geometrical disorder of the fronts of a tunnel-crack propagating in shear in some heterogeneous medium

A statistical analysis of the deformation of the fronts of a tensile tunnel-crack propagating in fatigue in some medium with spatially varying Paris constant was recently performed, with special emphasis on the evolution of the power spectra and correlation functions of the fluctuations of the fronts around reference straight lines. This study is extended here to coplanar propagation (along a weak plane) of a tunnel-crack loaded in mode 2+3. The results are rather similar to those previously obtained for mode 1. In particular, just like for tensile loadings, there is an effect of gradual selection in time of Fourier components of the fluctuations of the fronts of large wavelength. One novelty, however, is that for shear loadings, the fronts no longer tend to become symmetrical in time, so that correlations between crack front fluctuations at two points are higher for points located on the same front than for points located on distinct ones.     

Anaerobic biological treatment of dye bearing water in anaerobic sequencing batch reactor: Performance and kinetics studies

Textile and dye industries are main sources of dye bearing effluent. In present studies the anaerobic biological degradation of Acid Red 3BN dye water (AR3BNDW) and mixed dye water (MDW) for reduction of color and COD were studied in sequential batch reactor (SBR). The sludge as sources of microorganism was arranged from maize processing bio methanation wastewater treatment plant, which was acclimatized for treatment of AR3BNDW and MDW. After the acclimatization, dyes degradation were studied in SBR At optimum operation condition of hydraulics retention time (HRT) = 2.5 d, and treatment time (t_R) = 16 h, AR3BNDW have gone maximum 87% color reduction of 500 mg/L dye, and 82.8% COD reduction of 380 mg/L COD. At same operating condition, 84.5% color reduction of 500 mg/L dye, and 79.42% COD reduction of 413 mg/L COD achieved for MDW. The second order Grau model was fitted well for COD and dye reductions. The kinetics parameter were evaluated for both the dye water.     

Covariate model-based fault tree analysis for risk assessment in chemical process industries: A case study of a chlorine manufacturing facility

Fault tree analysis (FTA) is a promising quantitative technique for risk analysis in chemical process industries (CPIs). In FTA, a certain sequence of basic events (causes) leads to one specific Top event (critical event of interest). However, the conventional fault tree analysis has the limitations of staticity and uncertainty. The staticity in conventional FTA arises due to its inability to accommodate time-dependent characteristics of the process system. Whereas uncertainty primarily lies in the failure probability data of basic events. This paper proposes an innovative methodology that uses a time-dependent covariate model to update the failure probability values of major contributing basic events in FTA. A novel subclass of the family of phase-type distributions is used to model the covariates corresponding to the basic events. The newly developed methodology is applied for a case study in a chlorine manufacturing facility to estimate the chlorine release probability. The blockage in the pipeline was identified as the significant reason for chlorine release from expert opinion and sensitivity analysis. The results of the proposed model of FTA are compared with that of conventional FTA.     

综合性化学实验的线上线下混合式教学——以水泥分析为例

水泥熟料分析是一个经典的综合性实验,涉及重量分析和配位滴定分析的很多原理及操作。为了有效开展实验教学、缩短课堂讲解时间、客观评价学生实验数据及结果,我们开展了线上线下混合式教学,引导学生课前自主学习,训练学生综合和创新实验技能。这一改革提高了实验教学质量,取得了较好的教学效果。     

基于混酸回流制备碳点的中和过程

Carbon dots (C dots) are relatively novel carbon nanomaterials that have attracted significant interest due to their unique photoluminescence, good biocompatibility, and stability. The preparation methods of C dots was usually summarized into "top-down" and "bottom-up", and mixed acid reflux is a top-down strategy that can be used to synthesize C dots, during which neutralization is a necessary step that can significantly influence the properties and potential applications of the final product. Previously, this research area mainly focused on tuning the properties of C dots by changing the starting materials and/or varying the reaction conditions; the influence of the reagents used during neutralization has been largely ignored. As the previously reported C dots prepared by mixed acid reflux were obtained from different starting materials under varied conditions, a meaningful comparison is difficult. Herein, yellow-emitting C dots were prepared by mixed acid-refluxing a carbon-rich material derived from fullerene carbon soot. For the same batch of as-prepared C dots, the influences of four reagents, i.e., NaOH, Na₂CO₃, K₂CO₃, and NH₃·H₂O, during neutralization on the structures and photoluminescence of the resulting C dots were investigated in detail. The results of thermogravimetric analysis, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy clearly showed that the reagent used during neutralization can affect the degree of dissociation of the acidic functional groups on the C dots. This is further supported by examination of the C dot/surfactant mixtures where subtle changes in the phase behavior were observed. Structural changes of the C dots cause variations in their surface states, ultimately altering the optical characteristics, including UV-vis absorption and fluorescence. Among the treated C dots, the sample prepared with Na₂CO₃ showed the strongest emission under the same excitation wavelength, while that prepared with NH₃·H₂O exhibited a distinct red shift (~8 nm) in the emission curve. The results presented herein provide clear evidence that neutralization reagent selection is important for optimizing the properties of the resulting C dots obtained by mixed acid reflux. In addition, the photoluminescence of the C dots can be influenced by their counterions, providing a novel method for tuning the properties of C dots while explaining their behavior in saline solutions. In short, the basicity of the neutralizing reagent and the type of counterions affect the structure of the C dots surface, which brings different performances. This work reminds researchers that it is necessary to use the type of neutralizing reagent as an experimental condition when preparing C dots in the future.     

Photophysical characterization of mixed micelles of n-butanol/SDS and n-hexanol/SDS. A study at low alcohol concentrations

 The effect of the addition of n-butanol (BuOH) and n-hexanol (HexOH) on the micellization of sodium dodecylsulfate (SDS) has been investigated using fluorescence quenching methods. The binding constants were calculated using an expression which relates the total concentration of alcohols and the micelle concentration. The values of K were 4.67 and 17.6 M^-1 for BuOH/SDS and HexOH/SDS, similar to values obtained by other methods. The cmc of SDS decreases on addition of alcohols and goes through a minimum for the BuOH/SDS system. Micellar aggregation numbers (N) were determined from linear plots of Ln (I ⁰/I) against [Quencher] at low alcohol concentrations. For 15 mM SDS, in the presence of BuOH the N values decrease on addition of alcohol up to 0.2 M. For HexOH, N can be assumed to be constant up to 4.8 mM, after which N decreases. The polarity of the micellar core containing alcohol was evaluated from the I ₁/I ₃ ratio of monomeric pyrene. The effect of addition of the alcohol causes a decrease in the I ₁/I ₃, which corresponds to a decrease in the polarity of the pyrene solubilization site. Received: 28 October 1996 Accepted: 10 January 1997     

Packing effects in organometallic compounds: A study of five mixed crystals

A series of cocrystals of an organometallic tungsten complex with organic small molecules has been prepared and studied by single-crystal X-ray diffraction. Comparison of the five structures thus obtained allowed the measurement of the effects of the crystal environment on the molecular structure under investigation. Not only soft torsional degrees of freedom but also bond angles, the point symmetry, and other geometrical features of the reference molecule have been found to vary significantly. It is concluded that parameters commonly ascribed to themolecular structure may in reality depend onintermolecular interactions.Dedicated to Prof. Dr. J. Strähle on the occasion of his 60th birthday.