Combining GPS carrier phase and Doppler observations for precise velocity determination

The truncation error and propagation error are analyzed for velocity determination through differential GPS carrier phase observations,and an approach for the choice of the best number of points for the central difference method is developed.In order to overcome the disadvantages of existing GPS velocity determination methods,a new velocity determination algorithm is presented,based on combining carrier phase and Doppler observations.The basic idea is that two types of observation are combined by adding the...     

The rheology of suspensions of vinylon fibers in polymer liquids. II. Suspensions in polymer solutions

Summary The rheological properties of vinylon fiber suspensions in polymer solutions were studied in steady shear flow. Shear viscosity, first normal-stress difference, yield stress, relative viscosity, and other properties were discussed. Three kinds of flexible vinylon fibers of uniform length and three kinds of polymer solutions as mediums which exhibited remarkable non-Newtonian behaviors were employed. The shear viscosity and relative viscosity ( _r ) increased with the fiber content and the aspect ratio, and depended upon the shear rate. Shear rate dependence of _r was found only in the low shear rate region. This result was different from that of vinylon fiber suspensions in Newtonian fluids. The first normal-stress difference increased at first slightly with increasing fiber content but rather decreased and showed lower values for high content suspensions than that of the medium. A yield stress could be determined by using a modified equation of Casson type. The flow properties of the fiber suspensions depended on the viscosity of the medium in the suspensions under consideration.With 16 figures and 1 table     

On the measurement of normal stress differences in steady shear flow

Summary Compared to the similar pressure-distribution cone-and-plate apparatus of Adams and Lodge (4), the new apparatus' improvements include: temperature control of the cone (as well as the plate); increased stiffening of the frame; four (not three) pressuremeasuring holes in the cone/plate region; inclusion of a pressure-measuring hole on the axis under the cone truncation; exclusive use of a vertical free liquid boundary at the cone rim (without a sea of liquid). Temperature control of the rotating cone and of the fixed plate leads to acceptable temperature uniformity in the test liquid for working temperatures within 10°C or 20°C of ambient; the corresponding interval is about 1°C if the cone temperature control is abandoned. Pressure gradients measured using a Newtonian liquid agree with those calculated using Walters' eq. (3). For a viscoelastic liquid, after subtracting inertial contributions, pressure distributions measured at a given shear rate in the cone/plate region do not change when the gap angle is changed from 2° to 3°, showing that the effects of secondary flow are negligible. Values ofN ₃ =N ₁ + 2N ₂ obtained from the gradients of these distributions are believed to be in error by not more than ±1 Pa, in favorable cases. The present most useful ranges are: 10 to 5000 Pa forN ₃; 0.1 to 200 sec^–1 for shear rate; up to 5 Pa s for viscosity; and 5 to 40°C for temperature. As an application, it is shown that adding 0.1% of a high molecular weight polyisobutylene to a 2% polyisobutylene solution doublesN ₃ and has no detectable effect on the viscosity measured at low shear rates with a Ferranti-Shirley viscometer.

---

Zusammenfassung Im Vergleich zu dem ähnlichen Kegel-Platte-Gerät von Adams und Lodge (4) zur Messung der Druckverteilung wurden an dem neuen Gerät die folgenden Verbesserungen vorgenommen: Temperaturregelung an Kegel und Platte, Versteifung des Rahmens, vier (anstatt drei) Druckmeßlöcher im Kegel-Platte-Bereich, ein zusätzliches Druckmeßloch auf der Achse unter der Kegelstumpf-Deckfläche, ausschließliche Verwendung einer vertikalen freien Grenzfläche der Flüssigkeit am Kegelrand (ohne umgebenden Flüssigkeitssee). Die Temperaturregelung des rotierenden Kegels und der festen Platte führt zu einer ausreichenden Temperaturgleichförmigkeit in der Testflüssigkeit für Betriebstemperaturen, die höchstens um 10–20°C von der Umgebungstemperatur abweichen. Dieses Intervall beträgt dagegen nur etwa 1°C, wenn auf die Temperaturregelung am Kegel verzichtet wird. Für newtonsche Flüssigkeiten entsprechen die gemessenen Druckgradienten den mittels der Gleichung von Walters (3) berechneten. Für viskoelastische Flüssigkeiten zeigen sich bei der Änderung des Spaltwinkels von 2° auf 3° nach Abzug der Trägheitsbeiträge keine Änderungen der bei einer bestimmten Schergeschwindigkeit gemessenen Druckverteilung. Dies zeigt, daß Sekundärströmungseffekte vernachlässigbar sind. Es darf angenommen werden, daß die Werte vonN ₃ =N ₁ + 2N ₂, die man aus den Gradienten dieser Verteilungen erhält, unter günstigen Umständen mit einem Fehler von nicht mehr als ±1 Pa behaftet sind. Gegenwärtig liegen die günstigsten Bereiche bei 10 bis 5000 Pa fürN ₃, 0,1 bis 200 s^–1 für die Schergeschwindigkeit, unterhalb von 5 Pa s für die Viskosität und 5 bis 40°C für die Temperatur. Als Anwendung wird gezeigt, daß ein Zusatz von 0,1% hochmolekularen Polyisobutylens zu einer 2%igen Polyisobutylenlösung den Wert vonN ₃ verdoppelt, aber keinen erkennbaren Einfluß auf die (bei geringen Schergeschwindigkeiten mit einem Ferranti-Shirley-Viskosimeter gemessen) Viskosität hat.

---

udsf unidirectional shear flow - TCP truncated-cone and plate - N ₁,N ₂ 1st and 2nd normal stress differences in udsf - N ₃ N ₁ + 2N ₂ - : = A is defined by the equationA := B - P ^* hole pressurePw – Pm; Pw, Pm = pressures measured by flush transducer and by hole-mounted transducer - t time - , strain rate, shear rate - (P,t) covariant body metric tensor at particleP and timet - ⁱ , _i covariant and contravariant udsf body base vectors (i = 1, 2, 3) - ^–1 inverse of - R, plate radius, cone/plate gap angle - r ₀,h ₀ radius and height of cone truncation - r,, spherical polar coordinates; cone axis = 0; plate surface = /2 - physical components of stress; for a tensile component - cone angular velocity - p on the plate = /2 - ,T, density, absolute temperature, viscosity - P 0.15 ²(r ² –R ²) (inertial contribution) [2.7] - P _ve contribution [2.8] from flow perturbations of viscoelastic origin - r _i i = 1,2,3,4; values ofr at centers of holes in cone/plate region - P _i () pressure change recorded by transducerTi when cone angular velocity goes from zero to - 1/2 {P _i ()+ P _i (–)} (average for 2 senses of rotation) - rim pressure, from least-squares line through four points - Re Reynolds' number:R ²/ - (P,t)/t With 11 figures and 2 tables     

The mirror relations and nonlinear viscoelasticity of polymer melts

An attempt is made to incorporate into a quasilinear viscoelastic constitutive equation of the Boltzmann superposition type the two mirror relations of Gleissle, as well as his relation between the steady-state first normal-stress difference and the shear viscosity curve. It is shown that the three relations can hold separately within this constitutive model, but not simultaneously, because they require a different nonlinear strain measure, namelyS ₁₂ () = – a ( – 1) (a = 0 for 1,a = 1 for 1) for the mirroring of the viscosities,S ₁₂ () = – a (–k ²/) (a = 0 for k, a = 1 for k) for the mirroring of the first normal-stress coefficients, and for the third relation. Here denotes the shear strain and erf the error function. Experimental data on melts of a low-density polyethylene, a high-density polyethylene and a polypropylene show that the mirror relations are passable approximations, but that the third relation meets reality surprisingly close if the right value ofk is used.     

Inertial contributions to the pressure in the truncated-cone-and-plate apparatus with application to dilute polymer solutions

New measurements of the pressure distribution generated by two Newtonian liquids in the Truncated Cone-and-Plate Apparatus are presented, in order to evaluate the exact form of the inertial contribution for a range of Reynolds numbers (Re) fromRe = 140 toRe = 36,000;Re = R ² /, where and are the liquid density and viscosity respectively,R is the plate radius, and is the angular velocity of the cone. The Walters equation for lowRe, p ^w = 0.15 ² (r² – R²), is shown to be in excellent agreement with the measurements up toRe = 1000, provided an appropriate correction for the Newtonian hole pressure is made. Up toRe = 1000, the measured slope is within 1% of the theoretical value of 0.15 given by the Walters equation; as the Reynolds number increases above 1000, the data become increasingly nonlinear inr ². Other theoretical predictions made especially for largeRe begin to disagree with the data even belowRe = 1000. The application of the experimentally determined additive inertial contribution to measurements of pressure distribution in four dilute polymer solutions is found to reproduce adequately the expected form of the viscoelastic pressure distribution, even at highRe where the Walters equation is not valid. Measurements of a combination of normal-stress differencesN ₁ + 2N ₂ for polymer solutions involving specific polymer/solvent interaction sites show a difference of 45% with change of solvent, while no difference is observed in solutions of polymers without the interaction sites. The normal-stress ratio —N ₂/N ₁ for a 5% solution of cis-polybutadiene is 0.24 at a shear rate of 100 s^–1, and it appears to approach the zero shear limit of 2/7 given by the Doi-Edwards theory. The Higashitani-Pritchard-Baird-Lodge equation relating the elastic hole pressure to the normal-stress differenceN ₁ –N ₂ gives a qualitative agreement betweenN ₁ –N ₂ from the TCP Apparatus and the hole pressure from the Stressmeter; the percent difference is 0 at shear stress < 25 Pa, 35% at = 45 Pa, and 18% at the highest = 63 Pa.     

含任意项逻辑函数布尔差分的图形化算法研究

针对包含任意项的逻辑函数,提出了一种利用该类逻辑函数K图和bj图的图形转换来实现一阶布尔差分和二阶布尔差分计算的方法．实例表明,该图形方法具有简单、直接、方便的特点．     

Numerical solution of a viscous incompressible flow problem through an orifice

A steady flow problem of a viscous, incompressible fluid through an orifice is widely applicable to many physical phenomena and has been studied previously by many researchers. A problem of such type has been solved by applying LAD method given by Roache [1]. The resulting system of linear equations is solved by Hockney's method [2].     

Eigenvalue problem for integro-differential equation of supersonic panel,flutter

The dynamic stability of a thin plate in supersonic flow based on 2-dimensional linear theory leads to the study of a new problem in mathematical physics: complex eigenvalue prob-lem for a non-self-adjoint fourth-order integro-differential equation of Volterra’s type.Exact solutions of the aeroelastic system is obtained. In contrast to various approximate analyses, our critical curve agrees satisfactorily with experimental data, being free from divergence in the low supe’rsonic region. Moreover, we observe some notable physical behaviors: (1) mutual separation of flutter and vacuum frequency spectrums, (2) degeneracy of critical Mach number. The present method may be generalized in solving the supersonic flutter for 3-dimensional airfoil model as well as blade cascade in turbo-generator.     

The hole-pressure problem

There is a need to unify present hypotheses of the nature and role of the hole-pressure,p _e , and thus provide consolidation on which to base future research and understanding. This paper is intended to meet this need. Attention is directed towards the calculation ofp _e from the velocity and stress fields for viscoelastic fluids flowingacross rectangular holes. The constitutive models used are the Newtonian, Second-order and Maxwell models, for values of Reynolds number up to 10 and Weissenberg number up to 0.1.The numerical complications involved are studied through an investigation of the constituent parts ofp _e . Verification of present theory is then sought, from which justification may be derived for the estimation of elasticity fromp _e measurements. Attention is directed towards the predictions of Higashitani and Pritchard and the extension to the Tanner and Pipkin theory for Second-order fluids. The effects of variation of geometric dimensions and flow type uponp _e are also discussed.     

时差法超声流量计瞬时流速动态跟踪算法

时差法超声流量计由于受到功耗的限制, 在时间差的测量中不能采用很高的采样频率. 但在实际流量测量中存在着流体流速会突变的现象, 这样在低流速分辨率情况下就会引起流速测量不能实时跟踪而造成较大计量误差, 也就影响了其相应的计量精度和系统稳定性. 因此对时差法超声流量计瞬时流速动态的跟踪问题进行探讨, 设计出瞬时流速动态跟踪算法. 经过实验验证, 所设计的动态跟踪算法可以使超声流量计的计量精度提高0.4%左右, 重复性提高0.05%左右, 而系统功耗几乎没有大的变化.