Designed Construction of SrTiO3/SrSO4/Pt Heterojunctions with Boosted Photocatalytic H2 Evolution Activity

Efficient separation of photogenerated electron–hole pairs is a crucial factor for high-performance photocatalysts. Effective electron–hole separation and migration could be achieved by heterojunctions with suitable band structures. Herein, a porous SrTiO₃/SrSO₄ heterojunction is prepared by a sol-gel method at room temperature followed by an annealing process. XRD characterization suggests high crystallinity of the heterostructure. A well-defined interface between the two phases is confirmed by high-resolution (HR)TEM. The photocatalytic H₂ evolution productivity of the SrTiO₃/SrSO₄ heterojunction with Pt as co-catalyst reaches 396.82 μmol g⁻¹ h⁻¹, which is 16 times higher than that of SrTiO₃/Pt. The boosted photocatalytic activity of SrTiO₃/SrSO₄/Pt can be ascribed to the presence of SrSO₄, which promotes the transfer and migration of photogenerated carriers by forming the heterojunction and porous structure, which provides a large amount of active sites. This novel porous heterostructure brings new ideas for the development of high-efficiency photocatalysts for H₂ release.     

Synthesis and investigation of structural,optical, magnetic,and biocompatibility properties of nanoferrites AFeO2

Sol-gel method has been used for the synthesis of biocompatible superparamagnetic nanoferrites of AFeO₂ (A = Li, Na, K, Ca). Structural study of the nanoferrites reveals that LiFeO₂ exhibits cubic phase on the other hand NaFeO₂, KFeO₂, CaFeO₂ nanoparticles possess orthorhombic phase. Transmission electron microscopy (TEM) suggests that synthesized nanoferrites are nano-sized with spherical morphology. Optical properties confirm that nanoferrites emit and absorb light in a visible range of the electromagnetic spectrum. International Commission on Illumination (CIE) study discloses that the nanoparticles can be used to produce light of various colors. Magnetic study reveals that the nanoferrites exhibit superparamagnetic nature with high values of saturation magnetization 40.26 emu/g, 41.69 emu/g, 57.16 emu/g, and 43.66 emu/g, respectively for LiFeO_2, NaFeO₂, KFeO₂, and CaFeO₂. Biocompatibility study of the nanoferrites has been performed using Sulforhodamine B (SRB) and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The reason behind the observed properties and behavior has been discussed.     

Easy size control of polymer nanoparticles obtained by emulsification–evaporation technique in a microfluidic reactor

The production of polymer nanoparticles with a narrow size distribution on standard T- and X-configuration microfluidic chips with a channel size of 100 μm has been achieved. Introducing ethanol into the aqueous phase in 1:9 ratio (v/v) allowed one to reduce the surface tension of the contacting phases and obtain nanoparticles in the range of 100–150 nm. This makes our approach promising for development of nanoscale drug delivery systems.     

表面活性单体DMBAC光聚合动力学研究

采用偶氮二异丁脒盐酸盐(AIBA)作为光引发剂,光引发聚合并研究了阳离子表面活性单体——甲基丙烯酰氧乙基二甲基苄基氯化铵(DMBAC)的均聚及其与丙烯酰胺(AM)共聚合反应的动力学行为,聚合反应均在高于DMBAC临界胶束浓度(CMC)的条件下进行.研究结果显示DMBAC均聚合反应速率与引发剂浓度的0.29次方以及单体浓度的0.89次方成正比,均聚合反应的表观活化能约为13.74 kJ/mo1;DMBAC与AM共聚合反应速率与引发剂浓度的0.82次方以及单体总浓度的0.83次方成正比,共聚合反应的表观活化能约为10.97 kJ/mo1;同时测得DMBAC与AM共聚合反应的单体竞聚率为r₁=0.27(AM)、r₂=2.00(DMBAC),说明AM趋向于形成共聚物,而DMBAC更趋向于形成均聚物.     

傅变光谱仪数据处理中相位误差非线性的分析及对Mertz相位修正方法的讨论

傅里叶变换成像光谱仪在遥感应用中是一种很重要的科学仪器,在傅里叶变换光谱仪信号处理中存在相位误差的问题,文章阐述了相位误差产生的原因,分析了由零点采样偏移带来的相位误差的非线性,说明了产生这种非线性的原因是干涉图为有限长的离散序列,从一个新的角度通过数学推导的结果给出了这种非线性的解释和表达。接着由相位误差的非线性讨论了Mertz相位修正方法中的相位插值可能存在的误差,分析了已有的研究中的较好的处理方法,并提出了一种改进这种误差的补零变换的方法。使用通过标准光谱库中的源光谱数据仿真的干涉数据,对方法进行了比较和验证,说明了补零变换法可以改善相位插值的误差以及在一些情况下的相位突变,得到质量更好的复原光谱。     

毛竹化学成分光谱分析的快速建模方法研究

研究了毛竹综纤维素和木质素含量近红外光谱定量分析方法的建立。选用不同竹龄、纵向和横向部位的54个竹材粉末样品,用湿化学方法测定其综纤维素和木质素含量。在综纤维素和木质素含量的分布范围内,从低值、中间值和高值中挑选11个代表性样品,11个样品按预定比例混合得到21个混合样品,混合样品的综纤维素和木质素含量计算得到,再挑选22个目标成分含量不同的样品组成54个样品的校正集。用偏最小二乘法分别建立样品综纤维素含量、木质素含量和近红外漫发射光谱之间的相关模型。结果表明,综纤维素含量的预测模型的相关系数(R_p)为0.92,标准偏差(SEP)为1.04％;木质素含量的预测模型的R_p为0.93,SEP为0.91％,与常规方法建立的模型预测精度相似。说明利用样品混合的方式可快速增加校正集样品的数量、改善校正集样品的分布状况,继而建立稳定可靠的近红外定量分析模型。     

纯钛电极上的表面增强拉曼光谱研究

采用机械粗糙、电化学氧化还原、化学刻蚀等方法对纯钛电极表面进行粗糙,在钛基底上获得了表面增强拉曼光谱(SERS)信号。初步的实验结果表明,采用机械粗糙和电化学氧化还原方法能够获得具有一定粗糙度的电极表面,但是该表面并不具有SERS活性。而采用氢氟酸化学刻蚀方法能够获得具有SERS活性的表面,并且成功检测到吡啶分子的表面增强拉曼信号。实验尝试了在不同条件下进行刻蚀,对酸的刻蚀浓度、刻蚀时间、外接电位等影响因素作了研究,结果发现基底的SERS活性随氢氟酸浓度增大而出现最佳条件,即氢氟酸浓度0.33 Wt%,刻蚀时间为5 min时的拉曼信号最好。实验以0.01 mol·L-1吡啶为探针分子,0.1 mol·L-1 KCl为电解质,在开路电位下成功地观察了钛电极上的表面增强拉曼光谱。     

自悬浮定向流法制备纳米铜微粒及其结构表征

采用自悬浮定向流法制备金属铜纳米微粒,并用TEM,XRD和AES等分析手段研究了铜纳米微粒的形貌、粒度、结构及其表面氧化层特性。结果表明,在一定的参数条件下采用自悬浮定向流法可制备出单晶纳米铜微粒,并且通过工艺参数的调控可达到对微粒粒度的控制。     

过模慢波结构频率反射特性及谐振腔的影响

利用有限元方法求解:S-参数矩阵,研究了过模慢波结构对圆波导TM01,TM02模的反射特性,分析了在慢波结构末端加入谐振腔后,由于两端口的不对称性而造成的对反射特性影响。结果表明,在TM01的π模频率附近,慢波结构和谐振腔组成的系统对无谐振腔一侧端口入射TM01模的反射增大,而对有谐振腔一侧端口入射TM01模的反射减小。根据计算结果,解释了普通多波切伦柯夫振荡器所用慢波结构周期数较多的原因,说明了在多波切伦柯夫振荡器中引入谐振腔后,不但可以减少所用慢波结构周期数,而且有利于提高微波输出效率。     

BP神经网络电子束扫描均匀度校正系统

电子束的扫描均匀度是工业辐照电子直线加速器的重要技术指标,该校正系统利用人工神经网络中的误差反向传播法可以对扫描电流波形进行校正,以克服扫描磁场引起的电子束形状变化、位置改变等造成的电子束分布的不均匀性,从而使扫描曲线的归一化均方偏差达到1.8%。