Non-dynamical stochastic resonance: Theory and experiments with white and various coloured noises

Summary We describe the simplest system which shows stochastic resonance. A linear(ized) theory for white and (almost) arbitrarily coloured noise is presented. The presented new system has new, unique properties which originate from itsnon-dynamical character; for example, the strength and phase shift of periodic response of the system is independent of the frequency. Experiments have been carried out with the following noise processes: (physical) white noise, (physical) Lorentzian noise and (physical) 1/f noise. With a small extension of the system, its linear-response regime can be significantly increased. As the system is similar to some simple models of neurones, the new results might have not only physical but also biological importance. Paper presented at the International Workshop “Fluctuations in Physics and Biology: Stochastic Resonance, Signal Processing and Related Phenomena”, Elba, 5–10 June 1994.     

基于“慕课”的物理类微课程设计探索

“慕课”起步,微课程先行!鉴于目前微课程设计缺乏规范模式,本文旨在对此进行深入探讨．在微课程设计缺乏充分的理论基础支持的前提下,本文首先利用文献综述法归纳得出微课程的基本特征,据此确定微课程设计原则;其次以此原则为指导,借鉴远程开放教育的设计模式,类比探索出微课程设计的基本模式;最后将这种微课程设计模式应用于物理类课程,并结合物理类课程特点进行实证分析,成功实现了物理类微课程设计．教学实践活动进一步检验了本文构建的微课程设计模式切实可行、效果良好．     

红外双波段双层谐衍射光学系统设计

将谐衍射透镜应用在传统红外单波段佩茨瓦尔(Petzval)物镜上,设计得到工作波段处于3.4~4.2μm和8~11μm的红外双波段单层谐衍射光学系统。但单层谐衍射元件的衍射效率只在设计波长处衍射效率最高,随着波长相对设计中心波长向两侧偏离,主衍射级次的衍射效率逐渐下降。为提高含单层谐衍射元件光学系统的衍射效率,基于双层衍射元件衍射效率表达式研究了双层谐衍射元件的结构优化,给出了优化方法。设计出佩茨瓦尔型红外双波段双层谐衍射光学系统,其在3.4~4.2μm和8~11μm两个工作波段的衍射效率均达到90%以上,相比含有单层谐衍射面的光学系统衍射效率有了很大提升,提高了像面衬比度,完善了系统成像质量。     

Optimisation of TA6V alloy surface laser texturing using an experimental design approach

Active surfaces of plastic injection moulds are nowadays textured using classical techniques (chemical etching or EDM). Replacement of these technologies by a laser technology introduces a big flexibility: absence of mechanical contact with the tool, decrease of the effluent's volume and a big machining precision, even in the case of the complex forms as injection moulds for example. This paper reports the experimental study of the surface laser texturing of TA6V alloy. The influence of the operating factors on the laser texturing process has been studied using two experimental approaches: Taguchi methodology and response surface methodology (RSM). Empirical models have been developed. They allowed us to determine a correlation between process operating factors and performance indicators, such as surface roughness and material removal rate. Results analysis shows that the laser pulse energy and frequency are the most important operating factors. Mathematical models, that have been developed, can be used for the selection of operating factors’ proper values in order to obtain the desired values of the objective functions.     

基于USB的卫星通用化地面测试软件的设计

本文将软件工程中的组件技术引入卫星测试领域,提出了利用测试功能组件构建通用化测试软件的设计思路。首先,对现有卫星型号的地面测试任务做共性研究;其次,总结通用化测试软件的研制需求;然后,进行软件概要设计和详细设计;最后,软件实现。经验证,本文提出的基于USB接口的卫星通用化地面测试软件,通用性强,能较好的满足多个分系统单机设备的测试要求。     

The national ignition facility: path to ignition in the laboratory

The National Ignition Facility (NIF) is a 192-beam laser facility presently under construction at LLNL. When completed, NIF will be a 1.8-MJ, 500-TW ultraviolet laser system. Its missions are to obtain fusion ignition and to perform high energy density experiments in support of the US nuclear weapons stockpile. Four of the NIF beams have been commissioned to demonstrate laser performance and to commission the target area including target and beam alignment and laser timing. During this time, NIF demonstrated on a single-beam basis that it will meet its performance goals and demonstrated its precision and flexibility for pulse shaping, pointing, timing and beam conditioning. It also performed four important experiments for Inertial Confinement Fusion and High Energy Density Science. Presently, the project is installing production hardware to complete the project in 2009 with the goal to begin ignition experiments in 2010. An integrated plan has been developed including the NIF operations, user equipment such as diagnostics and cryogenic target capability, and experiments and calculations to meet this goal. This talk will provide NIF status, the plan to complete NIF, and the path to ignition.     

基于正常色散玻璃二级光谱的校正

利用正常色散玻璃校正二级光谱理论,给出了单个折射面二级光谱的计算法则,并应用此算法进行光学系统设计,给出了两个设计实例.系统仅使用正常色散玻璃组合,采用三组型设计结构,由三个大空气间隔的分离透镜组构成,很好地校正了二级光谱.     

空间光学遥感器大功率控制电箱的热设计

根据空间应用电子设备的热控要求,对空间光学遥感器的控制电箱进行了热控设计。首先,总结了空间电子设备的热设计原则。针对空间光学遥感器控制电箱介绍了相应的热设计流程,对典型的大功率器件进行了温差推算,并说明了电箱的各电路板和大功率元器件的热设计方案。最后,通过热分析和热试验手段对热控电箱的热控方案进行了验证。试验结果表明：控制电箱的整机稳态工况热平衡温度小于30℃,各元器件的最高壳温在54.2℃以内。结果验证了该设计方案完全满足设计指标要求。     

InGaAs近红外相机电路设计与实现

随着国外0.9～1.7μm InGaAs近红外相机的迅速发展,目前已被大量应用于工业和军事领域。探讨了InGaAs近红外相机在不同领域的应用,分析了InGaAs材料的优势及探测器选型。结合相应的探测器阵列,从相机偏置电压产生、时序驱动设计与制冷控制等方面给出了InGaAs近红外相机的硬件电路设计方案,解决了研制过程中的部分重难点,并针对后期图像处理进行了仿真验证,达到应用要求。     

基于线性规划的高温超导磁体线圈设计方法

电子真空回旋器件是一种对磁场精度要求较高的微波源装置,一般采用超导磁体提供磁场环境.超导磁体的应用中,磁场分布的实现是超导磁体设计的核心问题.提供回旋器件磁场的高温超导磁体包含较复杂的磁体绕组,为了解决此类设计计算问题,本文提出了一种包含设计区域约束的线性优化方法进行回旋器件高温超导绕组的设计优化,通过分步的约束和线性优化计算,可得到同时满足设计要求和绕组可实现的设计磁场电流分布设计.计算实例的结果给出了一个提供磁场强度1.3 Tesla,长度285 mm的均匀磁场区域,同时满足多位置的磁场要求,设计结果与要求一致度较好,精度满足应用需求.该计算方法是一种可适用于较复杂磁场要求和超导绕组结构的设计优化方法.