MALDI质谱检测蛋白质与富勒醇的非共价复合物

基质辅助激光解吸电离(MALDI)质谱由于受到酸性基质、样品制备、激光诱导聚合和基质加合物的形成等条件的限制而难以用于非共价复合物的检测.本文以芥子酸为基质,观察到蛋白质与富勒醇的特殊相互作用,一些质谱特征,如质量数迁移、宽的加合峰和定量结合比表明,在蛋白质和富勒醇之间形成了特殊的非共价复合物.其中,血红蛋白与富勒醇的结合比是1:4,而肌红蛋白与富勒醇的结合比是1:1.实验结果表明:富勒醇可用来保护血红蛋白,有在酸性介质中防止其分解的作用.因此,通过在基质组份中添加特性有机化合物保护被测样品,有可能实现用MALDI质谱测定四级结构蛋白质的分子量.     

聚合物共混物脆韧转变性能研究 Ⅲ.分散相形态参数之间的关系

为了研究形态（特别是分散状态）对聚合物共混物韧性的影响，建立了准网络形态模型，定义了分散相分布系数（ξ，０＜ξ１），并给出其物理意义，推导了基体层厚度的计算公式，研究了形态参数的变化对基体层厚度的影响．对于常见的无规形态，ξ≈１．对于准网络形态，ξ＜１，并且不是常数．计算结果表明，减小ξ和分散相粒径及其分布、增大其体积分数有利于减小基体层厚度．从理论上证明了准网络形态比无规形态更有利于减小基体层厚度．     

聚合物共混物脆韧转变性能研究 Ⅱ准韧性聚合物共混物脆韧转变的几何模型

给出了分散相粒间基体层厚度Ｔ与分散相粒径（ｄ）、粒径分散度（σ）和分散相体积分数（）的定量关系式．发现σ对Ｔ的影响与有关，不仅Ｔ随σ的增大而增大，而且越大，这种影响越显著．用计算机图像分析仪直接测定了聚氯乙烯／丁腈橡胶、聚丙烯（ＰＰ）／三元乙丙橡胶、ＰＰ／乙烯 醋酸乙烯酯共聚物共混物的Ｔ，发现这三种共混物的Ｔ近似于对数正态分布．理论预示与实验结果很好符合．     

Highly unsaturated pyranone derivatives from the basidiomycete Junghuhnianitida

Four new highly unsaturated pyranone derivatives A–D (1–4), together with one known compound 5 (−)-nitidon were isolated from cultures of the fungus Junghuhnianitida. Planar structures of the new compounds were elucidated on the basis of extensive NMR spectroscopic and mass spectrometric analyses. Absolute configurations of the new compounds were determined on the basis of biosynthetic considerations and quantum chemistry theory. Compound 1 exhibited almost the same cytotoxic activities as cis-platin.     

Modern mass spectrometry in the characterization and degradation of biodegradable polymers

In the last decades, the solid-waste management related to the extensively growing production of plastic materials, in concert with their durability, have stimulated increasing interest in biodegradable polymers. At present, a variety of biodegradable polymers has already been introduced onto the market and can now be competitive with non biodegradable thermoplastics in different fields (packaging, biomedical, textile, etc.). However, a significant economical effort is still directed in tailoring structural properties in order to further broaden the range of applications without impairing biodegradation. Improving the performance of biodegradable materials requires a good characterization of both physico-chemical and mechanical parameters. Polymer analysis can involve many different features including detailed characterization of chemical structures and compositions as well as average molecular mass determination. It is of outstanding importance in troubleshooting of a polymer manufacturing process and for quality control, especially in biomedical applications. This review describes recent trends in the structural characterization of biodegradable materials by modern mass spectrometry (MS). It provides an overview of the analytical tools used to evaluate their degradation. Several successful applications of MALDI-TOF MS (matrix assisted laser desorption ionization time of flight) and ESI MS (electrospray mass spectrometry) for the determination of the structural architecture of biodegradable macromolecules, including their topology, composition, chemical structure of the end groups have been reported. However, MS methodologies have been recently applied to evaluate the biodegradation of polymeric materials. ESI MS represents the most useful technique for characterizing water-soluble polymers possessing different end group structures, with the advantage of being easily interfaced with solution-based separation techniques such as high-performance liquid chromatography (HPLC).     

Determination of four sulfonylurea herbicides in tea by matrix solid‐phase dispersion cleanup followed by dispersive liquid–liquid microextraction

Matrix solid‐phase dispersion combined with dispersive liquid–liquid microextraction has been developed as a new sample pretreatment method for the determination of four sulfonylurea herbicides (chlorsulfuron, bensulfuron‐methyl, chlorimuron‐ethyl, and pyrazosulfuron) in tea by high‐performance liquid chromatography with diode array detection. The extraction and cleanup by matrix solid‐phase dispersion was carried out by using CN‐silica as dispersant and carbon nanotubes as cleanup sorbent eluted with acidified dichloromethane. The eluent of matrix solid‐phase dispersion was evaporated and redissolved in 0.5 mL methanol, and used as the dispersive solvent of the following dispersive liquid–liquid microextraction procedure for further purification and enrichment of the target analytes before high‐performance liquid chromatography analysis. Under the optimum conditions, the method yielded a linear calibration curve in the concentration range from 5.0 to 10 000 ng/g for target analytes with a correlation coefficients (r²) ranging from 0.9959 to 0.9998. The limits of detection for the analytes were in the range of 1.31–2.81 ng/g. Recoveries of the four sulfonylurea herbicides at two fortification levels were between 72.8 and 110.6% with relative standard deviations lower than 6.95%. The method was successfully applied to the analysis of four sulfonylurea herbicides in several tea samples.     

Humic acids as both matrix for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and adsorbent for magnetic solid phase extraction

In the present study, humic acids (HAs) were applied as both a matrix for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) and an adsorbent of magnetic solid phase extraction (MSPE) for the first time. As natural macromolecule compounds, HAs are inherently highly functionalized and contain laser energy absorbing–transferring aromatic structures. This special molecular structure made HAs a good candidate for use as a MALDI matrix in small molecule analysis. At the same time, due to its good adsorption ability, HAs was prepared as MSPE adsorbent via a simple co-mixing method, in which the commercially available HAs were directly mixed with Fe₃O₄ magnetic nanoparticles (MNPs) in a mortar and grinded evenly and completely. In this process, MNPs were physically wrapped and adhered to tiny HAs leading to the formation of magnetic HAs (MHAs). To verify the bi-function of the MHAs, Rhodamine B (RdB) was chosen as model compound. Our results show that the combination of MHAs-based MSPE and MALDI-TOF-MS can provide a rapid and sensitive method for the determination of RdB in chili oil. The whole analytical procedure could be completed within 30 min for simultaneous determination of more than 20 samples, and the limit of quantitation for RdB was found to be 0.02 μg/g. The recoveries in chili oil were in the range 73.8–81.5% with the RSDs less than 21.3% (intraday) and 20.3% (interday). The proposed strategy has potential applications for high-throughput analysis of small molecules in complex samples.     

不同基体改进剂对电感耦合等离子体质谱法测量血清中甲胎蛋白的影响

血清中甲胎蛋白(AFP)的准确测量对于癌症的临床诊断和治疗具有重要意义.电感耦合等离子体质谱法(ICP-MS)具有灵敏度高、检出限低、多元素同时检测等优点,但用于血清中低丰度蛋白的检测时,检出限常不及荧光检测法,因此,提高ICP-MS免疫分析测量低丰度蛋白质时的灵敏度具有重要意义.本研究发现,增强液能很大程度增加Eu信号强度,选取醋酸、醇类、EDTA三类有机试剂模拟增强液来探索增强机理.结果表明:酸性体系能增加目标元素在基体中的稳定性,减少其在管壁的吸附;碳原子或分子容易接受电子提高Eu的电离效率;EDTA能与金属离子结合,减少吸附,但同时EDTA与其它金属结合引入更多的干扰,从而使空白信号增大,5％ HAc既能满足酸性要求也能满足含碳量要求,作为基体时铕的灵敏度最高,同时也不影响空白信号.因此选择5％ HAc作为解离液,并应用于人血清中甲胎蛋白含量的测定,线性范围为1～600 μg/L,检出限为0.57 μg/L,采用基体改进ICP-MS测量人血清中AFP的含量与TRFIA测量结果一致,且精密度要优于TRFIA的测量结果.     

Study of the matrix effects of tetrodotoxin and its content in cooked seafood by liquid chromatography with triple quadrupole mass spectrometry

Tetrodotoxin is a marine biotoxin with high acute toxicity. The levels in cooked seafood will help us to assess its intake in humans and may help assess the risk of toxicity. However, heavy matrices hinder the direct quantitation of tetrodotoxin. A quantitative method of measuring tetrodotoxin in cooked seafood using liquid chromatography with triple quadrupole mass spectrometry was established in this study. Tetrodotoxin was extracted from the sample matrix using 2% formic acid in methanol and cleaned using a cation exchange cartridge. The cleanup conditions were optimized. The matrix effects were determined using the postextraction spiking method and by comparing the slope of the linear regression equation in sample matrix to that in solvent. The limit of detection in the sample matrix was 5 μg/kg and the limit of quantification was 10 μg/kg. The mean recoveries at three spiking levels were 66.9–89.2% with relative standard deviations of 5.0–10.8% (n = 6) in five different matrices. Tetrodotoxin was found at concentrations of 26.1–2462 μg/kg in nine of 83 cooked seafoods tested in this study. Eight analogs of Tetrodotoxin were detected in the samples studied.     

Infrared spectra and UV-induced photochemistry of methyl aziridine-2-carboxylate isolated in argon and xenon matrices

Methyl aziridine-2-carboxylate (MA2C) has been isolated in low temperature argon and xenon matrices and its structure and photochemistry were studied by FTIR spectroscopy. The reactant as well as the main photoproducts were characterized by comparison of their experimental IR spectra with spectra calculated at the DFT(B3LYP)/6-311++G(d,p) level. The theoretical calculations predicted the existence of two low energy MA2C conformers, differing by the orientation of the OCCN dihedral angle. Both conformers were identified in the studied matrices. Both narrowband tunable and broadband UV irradiations of matrix-isolated MA2C yielded isomerization photoproducts resulting from cleavage of the CC and weakest CN bonds of the aziridine ring. Irradiation with UV laser-light at λ = 235 nm resulted in the formation of the E isomer of methyl 2-(methylimino)-acetate (MMIA) and the Z isomer of methyl 3-iminopropanoate (M3IP). Subsequent irradiation at 290 nm led to observation of new bands resulting from E → Z isomerization of MMIA, while bands due to M3IP remained unchanged. The photoproduced Z isomer of MMIA could be subsequently consumed upon higher-wavelength irradiation (λ = 330 nm). The initially produced MMIA conformer was found to obey the nonequilibrium of excited rotamers (NEER) principle. No photoproducts resulting from the cleavage of the strongest CN bond of the MA2C aziridine ring were observed, nor that of methyl 3-aminoacrylate (M3AA), which could in principle be obtained also by cleavage of the weakest CN bond of the MA2C aziridine ring, but would imply a different H-atom migration simultaneous with the ring opening process. These results indicate that both the differential electronic characteristics of the CN bonds of substituted aziridine rings and the type of required H-atom migration are major factors in determining the specific photochemistries of substituted aziridines. Photofragmentation reactions of MA2C were also observed, through identification of various related products, e.g., acetonitrile, methanol, methane, CO and CO₂.