纳米PbO/Ti电极催化还原偏硼酸锂制备硼氢化锂

在乙二醇甲醚溶液中电解铅片,制备了铅醇盐配合物,然后将溶液直接水解、凝胶,再通过提拉法涂抹在钛丝表面,450 ℃煅烧2 h制备纳米PbO/Ti电极。 将PbO/Ti电极在0.2~1.0 mol/L LiOH+0.1~0.5 mol/L LiBO2溶液测试催化还原性能,研究了影响电解还原LiBO2制备硼氢化锂(LiBH4)的主要因素,如LiBO2和LiOH浓度等。 通过X射线粉末衍射和扫描电子显微镜对PbO/Ti电极和LiBH4进行了表征。 实验表明,纳米PbO/Ti电极表面颗粒分散较好,修饰电极催化性能稳定,放电电流较大,产率和电流效率分别达15.6%和25.3%。     

聚合物光伏材料与器件研究进展

高效率的聚合物太阳电池依赖于光吸收活性层材料对太阳光能量的充分利用．电极界面材料将光吸收活性层产生的空穴和电子分别快速高效地抽取到阳极和阴极,并通过进一步改进光伏器件的结构提升能量转换效率和稳定性．本课题组在光吸收活性层中新型聚合物给体材料、新型电极界面材料、利用水／醇性电极界面材料制作新型倒装器件结构的太阳电池方面取得重要进展,推动了太阳电池在能量转换效率和稳定性方面的突破．     

THE EFFECT OF ETHERS ON ALTERNATING COPOLYMERIZATION OF BUTADIENE AND PROPYLENE CATALYZED BY VANADIUM-ALUMINUM SYSTEM

The effect of five ethers on alternating copolymerization of br(?)adiene and propylene were investigated. It was found that under appropriate conditions, by adding ether into reaction system, the conversion could be increased by 10-20% and the catalytic efficiency doubled at -45℃. The interaction between ether and active center was also studied.     

ZBLAN玻璃中三价铒离子 2H11/2,4S3/2辐射跃迁的量子效率

为了探讨铒离子掺杂材料的激光制冷可能性, 依据测量样品的吸收光谱, 计算了Er3 掺杂的ZBLAN玻璃材料的Judd-Ofelt参数, 得到Ω2=3.01×10-20 cm2, Ω4=1.59×10-20 cm2, Ω6=1.03×10-20 cm2, 进而获得了2H11/2, 4S3/2及其以下各能级间跃迁的跃迁几率、分支比、寿命等数据. 测量了77 K到315 K温度范围内Er3 较强的两个绿色发射2H11/2, 4S3/2→4I15/2的发射谱及荧光寿命. 讨论了2H11/2, 4S3/2这样处于热平衡中的两个能级的量子效率的计算方法, 进而计算了它们的量子效率, 并与其它材料进行了比较.     

木立芦荟营养成分与功效

对木立芦荟中的蛋白质、超氧化物歧化酶、微量元素、维生素、多糖及水分进行了测定。其结果表明,本立芦荟原汁液中蛋白质含量为０．７４２ｍｇ／ｍＬ、超氧化物歧化酶活力为１０．２４５６ｎ／ｍＬ、维生素Ｂ２含量为０．００１９ｍｇ／ｍＬ。维生素Ｂ１２含量为０．０００５１ｍｇ／ｍＬ。干芦荟中钙含量为１０５２７．７７μｇ／ｇ、硒含量为８８．３４μｇ／ｇ、锗含量为７０．８２μｇ／ｇ。多糖质量分数为０．５６％,水分为鲜     

锂离子电池用富锂层状正极材料

正极材料与负极材料是锂离子电池重要组成部分。目前锂离子电池负极材料比容量通常在300mAh/g以上,而正极材料比容量始终徘徊在150mAh/g。正极材料正在成为锂离子电池性能进一步提升的瓶颈。富锂层状正极材料是一类新型正极材料,其可逆容量在200mAh/g以上,其高容量特性引起人们的广泛关注。这类材料可以用xLi₂MO₃·(1-x)LiM'O₂ (M 为Mn, Ti, Zr之一或任意组合; M'为Mn, Ni, Co之一或任意组合; 0≤x≤1)形式表示。由于其组成与结构的特殊性,这类富锂层状正极材料的充放电机理也不同于其它含锂过渡金属氧化物正极材料。本文介绍富锂层状正极材料的合成、结构与充放电机理,重点介绍近年来通过改性提高其电化学性能方面的研究进展,指出目前富锂材料研究中存在的问题,探讨未来的研究重点。     

淀粉基荧光微球的制备及其布洛芬包载和释药性能

以淀粉为原料,用乙酸酐酰化后,将异硫氰酸荧光素（FITC）接枝到淀粉醋酸酯大分子链上,以自组装的方法制备出包载布洛芬的淀粉基荧光微球,同时考察了淀粉基荧光纳米微球对布洛芬的控制释放性能。 荧光淀粉酯的用量、布洛芬的加入量及丙酮与水的体积比可影响载药微球的包封率和药物释放速度。 研究结果表明,当荧光淀粉酯用量为200 mg、布洛芬的量为60 mg、水和丙酮体积分别为50和20 mL时所合成的载药微球包封率最高,为69.5%,其药物体外释放也最快,48 h可释放62.7%。 用扫描电子显微镜和激光共聚焦显微镜(CLSM)对包药微球的体外释放过程进行了表征。     

A Novel High Active TiO2/AC Composite Photocatalyst Prepared by Acid Catalyzed Hydrothermal Method

A high active novel TiO2/AC composite photocatalyst was prepared and used for phenol degradation. It was much more active than P-25 and exhibiting good decantability, less deactivation after several runs and less sensitive to pH change. Diffuse reflectance spectra (DRS) revealed that the electronic change in TiO2 did not occur by the addition of AC. Results of SEM and XRD suggested that better TiO2 distribution can be achieved when optimal AC content was adopted. The performance of the prepared TiO2/5AC catalyst revealed great practical potential in wastewater treatment field.     

有机光伏器件激活层的微结构有序性与电荷输运

本文在对有机光伏电池载流子产生机理分析的基础上,从有机光伏电池激活层的微观结构对光电转换效率影响的角度,系统介绍了目前该领域的一些重要研究成果,详细分析了影响光电转换效率的主要因素,并提出了一系列改善光伏电池效率的方法,对未来该领域的研究作了展望。     

Preparation and characterization of PLGA particles for subcutaneous controlled drug release by membrane emulsification

Uniformly sized microparticles of poly(d,l-lactic-co-glycolic) (PLGA) acid, with controllable median diameters within the size range 40–140 μm, were successfully prepared by membrane emulsification of an oil phase injected into an aqueous phase, followed by solvent removal. Initially, simple particles were produced as an oil in water emulsion, where dichloromethane (DCM) and PLGA were the oil phase and water with stabiliser was the continuous phase. The oil was injected into the aqueous phase through an array type microporous membrane, which has very regular pores equally spaced apart, and two different pore sizes were used: 20 and 40 μm in diameter. Shear was provided at the membrane surface, causing the drops to detach, by a simple paddle stirrer rotating above the membrane. Further tests involved the production of a primary water in oil emulsion, using a mechanical homogeniser, which was then subsequently injected into a water phase through the microporous membrane to form a water in oil in water emulsion. These tests used a water-soluble model drug (blue dextran) and encapsulation efficiencies of up to 100% were obtained for concentrations of 15% PLGA dissolved in the DCM and injected through a 40 μm membrane.

Solidification of the PLGA particles was followed by removal of the DCM through the surrounding aqueous continuous phase. Different PLGA concentrations, particle size and osmotic pressures were considered in order to find their effect on encapsulation efficiency. Osmotic pressure was varied by changing the salt concentration in the external aqueous phase whilst maintaining a constant internal aqueous phase salt concentration. Osmotic pressure was found to be a significant factor on the resulting particle structure, for the tests conducted at lower PLGA concentrations (10% and 5% PLGA). The PLGA concentration and particle size distribution influence the time to complete the solidification stage and a slow solidification, formed by stirring gently overnight, provided the most monosized particles and highest encapsulation efficiency.