Analysis of microring filter with two embedded microring

In this paper, a microring resonator with two embedded microring (MRTEM) has been presented and studied theoretically. Transfer matrix method (TMM) has been used to simulate MRTEM and analyze the relations between add/drop spectrum and embedded microring arrangements. Three kinds of embedded microring arrangements have been proposed and analyzed by TMM. The theoretical and simulation results show that the Q factor of our structure is higher than that of traditional microring structure and the spectrum of MRTEM is independent on embedded arrangements.     

Leakage currents in ferroelectric thin films

The main mechanisms of leakage currents in thin lead zirconate titanate (PZT) ferroelectric films prepared by the sol–gel method are discussed. Four specific regions are determined in I–V dependencies. At very weak fields (10–20 kV/cm), the current falls with the voltage increase as a result of depolarization. In the low fields region (about 70–100 kV/cm), the leakage current decreases with the decrease of voltage ramp speed and its components are the ohmic and displacement currents. In the high fields region (≥130 kV/cm), the leakage current increases with the decrease of step voltage ramp in contrast to the previous case. Possible conductivity mechanisms are the Poole– Frenkel emission and hopping conduction. In the transition region between above-mentioned ones (from 80–90 to ～130 kV/cm), an abrupt unstable increase of current is observed caused by breakdown of reverse bias Schottky barrier. Depolarization currents are studied for sol–gel PZT films prepared at different preparation conditions.     

Achieving Optical Tri-Stability Through Periodic Metal-Dielectric Structure

Abstract

Through the modified transfer matrix method, the transmission properties of a one-dimensional coupled-resonator optical waveguide structure composed of metal layers and non-linear material layers is studied. Given proper incident frequency and structure parameters, an optical tri-stability has been achieved. The effect of loss has been considered.     

Generalization of Strang's Preconditioner with Applications to Toeplitz Least Squares Problems

In this paper, we propose a method to generalize Strang's circulant preconditioner for arbitrary n-by-n matrices A_n. The th column of our circulant preconditioner Sn is equal to the th column of the given matrix A_n. Thus if A_n is a square Toeplitz matrix, then Sn is just the Strang circulant preconditioner. When Sn is not Hermitian, our circulant preconditioner can be defined as . This construction is similar to the forward-backward projection method used in constructing preconditioners for tomographic inversion problems in medical imaging. We show that if the matrix A_n has decaying coefficients away from the main diagonal, then is a good preconditioner for An. Comparisons of our preconditioner with other circulant-based preconditioners are carried out for some 1-D Toeplitz least squares problems: min ∥ b - Ax∥₂. Preliminary numerical results show that our preconditioner performs quite well, in comparison to other circulant preconditioners. Promising test results are also reported for a 2-D deconvolution problem arising in ground-based atmospheric imaging.     

Novel shooting method with simple control strategy for fiber lasers

A novel shooting method with excellent simple control strategy is developed for solving the failure to convergence of the traditional shooting methods themselves in fiber lasers model. Compared with the published literature, the novel shooting method provides a clear physical understanding method for getting the threshold pump power and the exact results with given random functions in Yb³⁺-doped fiber lasers and Er³⁺-doped fiber lasers. Then, the results in Er³⁺-doped fiber lasers and Yb³⁺-doped fiber lasers demonstrate that the solutions using the novel shooting method has high accuracy of 10⁻⁸ W with several iteration steps, which have extended the applicable range of the end-pumped power even lower than 1 mW pump power. Furthermore, compared with 1480 nm pump for the threshold and slope efficiencies of the Er³⁺-doped fiber lasers, 978 nm fiber lasers can extend wider scope of application and be pump source in the coming future. Finally, the lower threshold and higher slope efficiency at 975 nm than those of 910 nm pump in Yb³⁺-doped fiber lasers, 975 nm pump laser provides for broad band excellent cladding pump source.     

Development and validation of a new LBM-MRT hybrid model with enthalpy formulation for melting with natural convection

This article presents a new model to simulate melting with natural convection of a phase change material. For the phase change problem, the enthalpy formulation is used. Energy equation is solved by a finite difference method, whereas the fluid flow is solved by the multiple relaxation time (MRT) lattice Boltzmann method. The model is first verified and validated using the data from the literature. Then, the model is applied to a tall brick filled with a fatty acid eutectic mixture and the results are presented. The main results are (1) the spatial convergence rate is of second order, (2) the new model is validated against data from the literature and (3) the natural convection plays an important role in the melting process of the fatty acid mixture considered in our work.     

Analysis of Trapping Force and Torque for Fiber-optical Trap by the Finite-differential Time-domain (FDTD) Method

In this paper,the FDTD method is used to calculate the light field distribution in an uncoated fiber probe with a small dielectric particle.By integrating Maxwell′s stress tensor in the FDTD calculation,the time-averaged force exerted on the dielectric particles with different sizes and at different positions is obtained.The calculation results are also verified experimentally.The force near the axis in the vicinity of the tip is about 10-14 N for the incident 10 mW laser of 980 nm.Furthermore,the torque exerting on an ellipsoidal dielectric particle by focusing light field with two fiber probes is calculated and the dependence of this torque on both the declination angle of the ellipsoidal particle and the incident laser power ratio of the two probes is obtained.The detailed intensity map within the particle is also given.     

Asymptotics of dissipative nonlinear evolution equations with ellipticity: different end states

In this paper, we consider the global existence and asymptotic behaviors of solutions to the Cauchy problem for the following nonlinear evolution equations with ellipticity and dissipative effects:

(E)     

Pfaffian Solutions and Resonant Interaction Properties of a Coupled BKP Lattice

In this paper, we give a coupled lattice equation with the help of Hirota operators, which comes from a special BKP lattice. Two-soliton and three-soliton solutions to the coupled system are constructed. Furthermore,resonant interaction of the two-soliton solution is analyzed in detail. Under some special resonant condition, it is shown that low soliton can propagate faster than high one. Finally, the N-soliton solution is presented in the Pfaffian form.     

Exact solutions of the nonlinear differential-difference equations associated with the nonlinear electrical transmission line through a variable-coefficient discrete（G＇/G）-expansion method

We investigated exact traveling soliton solutions for the nonlinear electrical transmission line. By applying a concise and straightforward method, the variable-coefficient discrete（G /G）-expansion method, we solve the nonlinear differential–difference equations associated with the network. We obtain some exact traveling wave solutions which include hyperbolic function solution, trigonometric function solution, rational solutions with arbitrary function, bright as well as dark solutions.