The Effect of Alkane Chain Length on the Liquid–Liquid Critical Temperatures of Oligostyrene/Linear-Alkane Mixtures

Summary. Upper critical solution temperatures (UCSTs) for liquid–liquid demixing in a set of mixtures of linear alkanes (pentane (N ₁=5) to pentacontane (N ₁=50)) with an oligostyrene (1241amu, N ₂=12) are reported. We find strong correlation between the Hildebrand solubility parameters of the alkanes and the UCST. Correlations are developed which enable predictions concerning the miscibility of mixtures of compounds with longer chains.     

Studies on the thermodynamics of solvent extraction of indium (III) with HDEHMTPCA

The equilibrium molalities In³⁺ in {In₂(SO₄)₃ + Na₂SO₄ + HDEHMTPCA + n-C₈H₁₈ + water} were measured at ionic strength from (0.1 to 2.0) mol · kg⁻¹ containing Na₂SO₄ as supporting electrolyte in aqueous phase and at constant molality extractant at temperatures from (278.15 to 303.15) K in organic phase. The standard extraction constants K⁰ at various temperatures were obtained by methods of extrapolation and polynomial approximation. Thermodynamic quantities for the extraction process were calculated.     

Value function and optimality conditions for semilinear control problems

This paper is concerned with optimal control problems of Mayer and Bolza type for systems governed by a semilinear state equationx(t)=Ax(t) + f(t, x(t), u(t)), u(t) U, whereA is the infinitesimal generator of a strongly continuous semigroup in a Banach spaceX. We prove necessary and sufficient conditions for optimality and then use these conditions to investigate properties of the value function related to superdifferentials. Conversely, we use the value function to obtain criteria for optimality and feedback systems.Work (partially) supported by the Research Project Equazioni di evoluzione e applicazioni fisicomatematiche (M.U.R.S.T.-Italy).     

Miscibility and phase separation in SAN/PMMA blends investigated by positron lifetime measurements

Miscibility and phase separation in SAN/PMMA blends have been investigated using DSC, IR spectroscopy and positron lifetime spectroscopy (PLS). Single broad glass transition observed throughout the blend compositions, may be due to overlap of two glass transitions. IR measurements clearly indicate the absence of strong interactions. This supports miscibility is due to intramolecular repulsive forces in the SAN component. On the other hand, free volume data show negative deviation from linear additivity indicating the blends are miscible. The interchain interaction parameter β exhibits a complex behavior and the extent of miscibility is not revealed. Following Wolf’s treatment, we have evaluated the geometry factor γ and hydrodynamic interaction parameter α and found α is a suitable parameter in predicting the miscibility window. The cloud points in SAN/PMMA blends increase with decreasing PMMA content. The change in free volume size correlates well with the observed change in cloud point.     

Evaluation of the surface tension measurement of axisymmetric drop shape analysis (ADSA) using a shape parameter

A quantitative criterion called “shape parameter” to evaluate the quality of surface tension measurement of Axisymmetric Drop Shape Analysis (ADSA) is presented. ADSA is a powerful technique for the measurement of interfacial tensions and contact angles of pendant drops, sessile drops, and bubbles. Despite the general success of ADSA, deficient results may be obtained for drops close to spherical shape. Therefore, the “shape parameter” was used to determine the range of drop shapes in which ADSA succeeds or fails. The “shape parameter” is a dimensionless parameter that expresses quantitatively the difference in shape between a given experimental profile and an inscribed circle. The surface tension measurements of ADSA were evaluated for both pendant drop and constrained sessile drop configurations using the shape parameter. Different shapes of the pendant drop were studied using different sizes and materials of holders. For each drop configuration, a “critical shape parameter” was defined based on the minimum value of the shape parameter that guarantees an error of less than ±0.1 mJ/m². Furthermore, the effects of the type of liquid and constellation on the “critical shape parameter” were studied.     

Thermal analysis study of Bi<Subscript>2</Subscript>Sr<Subscript>2</Subscript>Ca<Subscript>2</Subscript>Cu<Subscript>3-x</Subscript>Er<Subscript>x</Subscript>O<Subscript>10+δ</Subscript> glass-ceramic system

Summary We have fabricated glasses in the Bi-2223 HT_c superconductor system with Bi₂Sr₂Ca₂Cu_3-xEr_xO_{10+ δ} nominal composition, where x=0.5 and 1.0, by the glass-ceramic technique. Using an analysis developed for non-isothermal crystallization studies, information on some aspects of crystallization temperature and thermal properties has been obtained. The crystallization studies were made using DTA with several uniform rates. The calculations of crystallization activation energies, E_a, and the Avrami parameters, n, were made based on the non-isothermal kinetic theory of Kissinger and the Ozawa’s equations. The DTA data of the samples showed that the first crystallization temperature, T_x1, increases and the second crystallization temperature, T_x2, decreases by increasing the Er concentration. This suggests that the Er substitution had significant effect on the glassification of the BSCCO material due to change on the surface nucleation and increased ionic activities at high temperature region. The activation energy for crystallization, E_a, of the samples was also showed an increase at high Er concentration case. However, the Avrami parameter, n, decreased from 2.5 to 1.7 for x=0.5 and 1.0 samples, respectively. This suggests that the growth mechanism is diffusion-controlled and three-dimensional parabolic growth takes place near the first crystallization temperature. The oxidization rates and the activation barrier for oxygen out-diffusion process, E, was calculated using the TG data. It was found that the total mass gain in the x=0.5 sample is comparably smaller than that of the x=1.0 sample. This shows that the oxygen absorption of the x=1.0 sample is faster than the x=0.5 sample, leading to increase in the oxidization rate in the x=1.0 material.     

Zr(OH)4的热分解及ZrO2的相变过程

利用TG-TDG-DTA热分析技术研究了由Zr（OH）4热分解制备ZrO2的脱水过程,并结合X射线粉末衍射技术研究了ZrO2的相变过程．发现在82℃的吸热峰对应Zr（OH）4的脱水,而435℃附近出现的放热峰则为四方ZrO2向单斜ZrO2的晶相转变．采用外推法确定了Zr（OH）4脱水过程遵循三维扩散机理,其函数方程为g（α）=[{1／（1-α）}^1/3-1]^2．以实验获得的动力学参数ln A和E为基础,用最小二乘法对ln A和E进行线性拟合,得到动力学补偿效应表达式为ln A=0．437E-20．69．     

Molecular Simulation to Explore the Dissolution Behavior of Sulfur in Carbon Disulfide

Soluble sulfur (S₈) and insoluble sulfur (IS) have different application fields, and molecular dynamics simulation can reveal their differences in solubility in solvents. It is found that in the simulated carbon disulfide (CS₂) solvent, soluble sulfur in the form of clusters mainly promotes the dissolution of clusters through van der Waals interaction between solvent molecules (CS₂) and S₈, and the solubility gradually increases with the increase in temperature. However, the strong interaction between polymer chains of insoluble sulfur in the form of polymer hinders the diffusion of IS into CS₂ solvent, which is not conducive to high-temperature dissolution. The simulated solubility parameter shows that the solubility parameter of soluble sulfur is closer to that of the solvent, which is consistent with the above explanation that soluble sulfur is easy to dissolve.     

山姜素与人血清白蛋白相互作用的荧光光谱法研究

利用荧光光谱法和紫外-可见光谱法研究了山姜素与人血清白蛋白(HSA)之间的相互作用。证实了山姜素对HSA的荧光猝灭为动态猝灭过程,并测定了不同温度下的猝灭常数; 根据Fōrster非辐射能量转移理论,计算出山姜素在蛋白质中的结合位置与色氨酸残基间的距离为4.05 nm; 由求得的热力学参数,推断了山姜素与HSA之间主要靠疏水作用力结合;用三维荧光光谱及同步荧光光谱技术探讨了山姜素对HSA构象的影响。     

悬臂梁中开闭裂纹的损伤识别

利用裂纹诱导弦挠度函数,建立了悬臂Euler-Bernoulli中开闭裂纹位置、深度、初始张开角等损伤参数的识别方法。为此,首先将梁中开闭裂纹等效为单向扭转弹簧,给出了考虑裂纹缝隙效应的裂纹梁等效抗弯刚度,并得到悬臂Euler-Bernoulli开闭裂纹梁弯曲挠度的显式闭合解及裂纹诱导弦挠度函数,证明了裂纹诱导弦挠度的分段线性函数。其次,基于单向扭转弹簧的性质,建立了通过多步加载进行梁中开闭裂纹参数及其上下侧属性的识别方法。最后,通过数值算例验证了本文所建立的开闭裂纹损伤识别方法的适用性和可靠性,考察了裂纹分布位置、深度和初始张开角以及裂纹识别区间和挠度测量误差等参数对识别结果的影响,结果表明:当裂纹处于张开状态时,裂纹处裂纹诱导弦挠度斜率改变量随着施加荷载的增加而增加;当裂纹闭合时,其裂纹诱导弦挠度斜率改变量将保持为常量;裂纹损伤参数的识别误差随测量误差的增加而增加,但整体识别结果具有较高的精度,较好的鲁棒性。